Date: Tue, 19 Apr 2016 09:20:12 +0200 From: Milan Obuch <freebsd-arm@dino.sk> To: freebsd-arm@freebsd.org Cc: Emmanuel Vadot <manu@bidouilliste.com>, Erich Dollansky <erich@alogt.com> Subject: Re: Orange Pi One Message-ID: <20160419092012.0ad4ad2d@zeta.dino.sk> In-Reply-To: <20160418210108.4047c526@zeta.dino.sk> References: <20160413232414.3a37907e@zeta.dino.sk> <20160414062820.7b907ba9@X220.alogt.com> <20160414064405.202e4eef@zeta.dino.sk> <CABx9NuQWatjAhA1oL8EtUbv5kSbG8qX-KB%2BGBr9PTqVs4fnMNg@mail.gmail.com> <20160418094916.10dc9ae8@zeta.dino.sk> <20160418174918.33d3d19e4105eb737d17b122@bidouilliste.com> <CABx9NuQaFEuZmDtJ=Rie5XC3iQDqTEBX6ZRiWxNfEa_BomTUcA@mail.gmail.com> <20160418210108.4047c526@zeta.dino.sk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 18 Apr 2016 21:01:08 +0200 Milan Obuch <freebsd-arm@dino.sk> wrote: [ snip ] > > > > Hi, > > > > > > > > after some struggling I am able to produce working u-boot. With > > > > working serial console, I see following when powering up the > > > > Orange Pi: > > [ snip ] > > > > > U-Boot SPL 2016.01 (Apr 17 2016 - 10:18:49) > > > > DRAM: 512 MiB > > > > Trying to boot from MMC > > > > > > > > > > > > U-Boot 2016.01 (Apr 17 2016 - 10:18:49 +0200) Allwinner > > > > Technology > > > > > > > > CPU: Allwinner H3 (SUN8I) > > > > DRAM: 512 MiB > > > > WARNING: Caches not enabled > > > > MMC: SUNXI SD/MMC: 0 > > > > reading u-boot.env > > > > In: serial > > > > Out: serial > > > > Err: serial > > > > Net: No ethernet found. > > > > starting USB... > > > > No controllers found > > > > Hit any key to stop autoboot: 0 > > > > Booting from: mmc 0 ubldr > > > > reading ubldr > > > > ** Unable to read file ubldr ** > > > > => > > > > > > > > I think now it's time to build ubldr, kernel and world for this > > > > board. > > > > One step further - compiled ubldr as part of buildworld, tried, and found I need ubldr.bin to start boot process, ubldr just keeps crashing with following: Booting from: mmc 0 ubldr reading ubldr 235312 bytes read in 63 ms (3.6 MiB/s) ## Starting application at 0x01000098 ... undefined instruction pc : [<01c0f00c>] lr : [<5ff77138>] reloc pc : [<ebc9f00c>] lr : [<4a007138>] sp : 5bf4ba70 ip : 00000030 fp : 5ff76ffc r10: 00000001 r9 : 5bf4fee8 r8 : 00000000 r7 : 00000001 r6 : 5bf513e0 r5 : 01000098 r4 : 00000000 r3 : 00000001 r2 : 01c28000 r1 : 5bf513e4 r0 : 00000000 Flags: nZCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... but ubldr.bin works (command typed manually): => fatload mmc 0 0x42000000 ubldr.bin reading ubldr.bin 192096 bytes read in 58 ms (3.2 MiB/s) => go 0x42000000 ## Starting application at 0x42000000 ... Consoles: U-Boot console Compatible U-Boot API signature found @0x5bf504c8 FreeBSD/arm U-Boot loader, Revision 1.2 (root@zeta.dino.sk, Tue Apr 19 06:33:11 CEST 2016) DRAM: 512MB MMC Device 1 not found Number of U-Boot devices: 1 U-Boot env: loaderdev='mmc 0' Found U-Boot device: disk Checking unit=0 slice=<auto> partition=<auto>... good. Booting from disk0s1: - can't load 'kernel' Type '?' for a list of commands, 'help' for more detailed help. loader> Now I can type loader command, so I can try to load kernel if I had one (I tried to build it from stock FreeBSD sources, but something was wrong, I must figure why buildkernel did not produce kernel... just testing now, waiting where it breaks). Milan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20160419092012.0ad4ad2d>