Date: Fri, 15 May 1998 15:52:25 +0100 From: Roger Hardiman <roger@cs.strath.ac.uk> To: ahasty@FreeBSD.ORG, freebsd-multimedia@FreeBSD.ORG, conrads@neosoft.com, freebsd-questions@FreeBSD.ORG, l.rizzo@iet.unipi.it Subject: AWE64 - awe0 not detected, but sbmidi0 and snd0 are detected Message-ID: <355C56A9.6A2B5CE0@cs.strath.ac.uk>
next in thread | raw e-mail | index | archive | help
Hi, I have a a PnP AWE 64 Value (the 512k version without the SPDIF port). The AWE driver is not detecting the card. However the wave and midi devices are detected and playing wave files works fine. My dmesg (pruned) has the following Probing for PnP devices: CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial 0x1b05c6ac sb0 at 0x220 irq 5 drq 1 on isa snd0: <SoundBlaster 16 4.16> sbxvi0 at ? drq 5 on isa snd0: <SoundBlaster 16 4.16> sbmidi0 at 0x330 on isa snd0: <SoundBlaster MPU-401> awe0 at 0x620 on isa AWE32: not detected opl0 at 0x388 on isa snd0: <Yamaha OPL3 FM> Few things.... pnpinfo says the WaveTable is on 0x620. I noticed the Win95 driver uses 620 a20 and e20 and there was something in the linux FAQ about ensuring the PnP had picked up on a20 and e20. Should there be a /dev/awe0? I'm running FreeBSD 3.0-980311-SNAP in SMP mode. I have no other ISA devices. The rest are PCI cards. Kernel config (pruned) is controller pnp0 # add PnP controller snd0 device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr device sbxvi0 at isa? drq 5 device sbmidi0 at isa? port 0x330 device awe0 at isa? port 0x620 device opl0 at isa? port 0x388 pnpinfo (pruned) is Card assigned CSN #1 Vendor ID CTL00e4 (0xe4008c0e), Serial Number 0x1b05c6ac PnP Version 1.0, Vendor Version 16 Device Description: Creative SB AWE64 PnP Successfully got 69 resources, 3 logical fdevs -- card select # 0x0001 CSN CTL00e4 (0xe4008c0e), Serial Number 0x1b05c6ac Logical device #0 IO: 0x0220 0x0330 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 5 0 DMA 1 5 IO range check 0x00 activate 0x01 Logical device #1 IO: 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Logical device #2 IO: 0x0620 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 IRQ 0 0 DMA 4 4 IO range check 0x00 activate 0x01 Any ideas why the AWE device is not being detected. Help... Roger Hardiman University of Strathclyde Telepresence Group roger@cs.strath.ac.uk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?355C56A9.6A2B5CE0>