Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 09 Jun 2013 04:43:55 +0300
From:      paranormal <paranormal@isgroup.com.ua>
To:        freebsd-wireless@freebsd.org
Subject:   Re: WDS
Message-ID:  <1370742235.1786.48.camel@eva02>
In-Reply-To: <201304252228.21591.onyx@z-up.ru>
References:  <201304252228.21591.onyx@z-up.ru>

index | next in thread | previous in thread | raw e-mail

[-- Attachment #1 --]
My experience:

A friend of my gave me some used cheap dlink and WDS setup with stable
9.smth was unsuccessful.
I didn't dig a lot. The dlink was look like a shit and I gave it back.
If you figure out a proper device for WDS, tell me.
And, the most important, how much delays does it make...

I bought three 9Db antennas for my AP, the original antennas is 3Db. And
it improves signal very good.
If you want I can make a measure.. old vs new in terms of ifconfig S:N
or airodump PWR.

On Thu, 2013-04-25 at 22:28 +0400, Dmitry Kolosov wrote:
> I need to expand my home wireless network.
> My environment:
> 1. FreeBSD 9-S based AP with ath0 <Atheros 9280> (AR922X as for pciconf) 
> configured this way:
> wlans_ath0="wlan0"
> create_args_wlan0="wlanmode hostap dturbo regdomain RU"
> ifconfig_wlan0="channel 2:g ssid mynet_ath  192.168.22.1/24"
> hostapd_enable="YES"

Does dturbo work for you? Which speed does it give?

> 
> 2. FreeBSD 9-S based STA with ath0 <Atheros 9285> configured this way:
> wlans_ath0="wlan0"
> create_args_wlan0="regdomain RU"
> ifconfig_wlan0="WPA DHCP"
> wpa_supplicant_flags="-sq"

Try without WPA. I have a better speed without wpa, for encryption I use
ipsec.

> 
> 3. I have DLink DWL 2100AP with WDS support.
> 
> Please, point me to corresponding manual to setup a WDS to expand my wireless. 
> Also, any advices about my configuration are _very_ welcomed!
> Thanks in advance!
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"


[-- Attachment #2 --]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.20 (FreeBSD)

iQIcBAABCgAGBQJRs93bAAoJEJv+PjkKQxN0vKsQAOrR29dhA7YOeYGXBJY2t8yp
1r5i3IRAg6c6OcnOnFmSzvalKxp7Fpc0dpuxoQ9Jl0QFlbhQiF7RucVsAjBLAmbc
NU7ZhKu/JLPsfL1Xc5It0qi54hTPHWcA4uq4tpE0G8RAfAQx3NpJg2XCx1XU574J
YC+ZJpMPMNDG2996z/+gBHprO+92rFSHPldtB9Nce3G/sX96tGRvA9iVruQWZFjl
J1GLmPQWPQusCNpDHJFC4qM3GCSIaSjFqZbaAI3TGJPDRJG3qXN0NaCSiM+dvvOx
RsvSV1tyEMuh1EqNSiHY1cynQpM2bPqPXli5t8knPmNwFdwViUheBcFWXrQYqg/2
UluiKUEYRx67g2GBi+HzFCaOQSkwYfFFFA7wfzwUPcYue0ysGlQfwN8lWAe6mSDK
OVhO0i8dGWbxQ3W8nOLiWGaTCXhqxcf60PDZPImkHso9chgMreNoFBAXBIxGr1cx
OWB8syGzHyCrE2Nmj7pd7yhAV5IXx+/pHcTRHMZmw/dTc/ZmYo5mr68EM4qMwSDH
E1O02YEyHKTC01x3otFeI3fH8chr+VTfzuufcfGJ9Bbr6ZQzDGh+ghlUWwWX3mTP
YhK0JfGNRHEezWYOxMN4E7xRbNHwSVqbmXFMSbxVX6n8cLpZy2WPe3SbpdvHjHs9
5T6nMhcJ7YvliyleieDf
=LjsE
-----END PGP SIGNATURE-----
help

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1370742235.1786.48.camel>