Date: Wed, 27 Jan 1999 14:49:21 -0800 (PST) From: Randy Bush <randy@psg.com> To: freebsd-multimedia@FreeBSD.ORG Subject: can't get back to luigi on 4.0-current Message-ID: <m105dlx-0008G4C@rip.psg.com>
next in thread | raw e-mail | index | archive | help
so i had moved my sound card (awe64) from luigi to vox to try and chase the
fxtv problem the other week, until i found that the brooktree driver does
not yet support the hauppauge tuner sound stuff.
well, i need the mbone tools, and vat seems to want luigi. so i rehacked
the kernel (4.0-current as of 990126) to luigi, i think. kernel config sez
device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr
but it is not working. when i run vat or xmix, they syslog the following:
pcm0: unit not configured, perhaps you want pcm1 ?
and
# xmix
Error opening mixer device /dev/mixer: Device not configured
maybe it is that /kernel.config is not getting run in 4.0? because it has
the
USERCONFIG
pnp 1 0 enable os port0 0x220 port1 0x330 port2 0x388 irq0 5 drq0 1 drq1 5
pnp 1 1 enable os port0 0x200
pnp 1 2 enable os port0 0x620 port1 0xa20 port2 0xe20
quit
which i suspect needs to be run.
dmesg appended.
randy
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Wed Jan 27 14:27:50 PST 1999
root@rip.psg.com:/usr/src/sys/compile/RIP
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 300683703 Hz
CPU: Pentium II (quarter-micron) (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x651 Stepping=1
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 134217728 (131072K bytes)
config> quit
avail memory = 127856640 (124860K bytes)
Preloaded elf kernel "kernel" at 0xf02ab000.
ccd0-5: Concatenated disk drivers
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
ahc0: <Adap
tec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 15 on pci0.6.0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 15 on pci0.9.0
fxp0: Ethernet address 00:a0:c9:df:c8:4e
bktr0: <BrookTree 878> rev 0x02 int a irq 10 on pci0.10.0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
smbus1: <System Management Bus> on bti2c0
smb1: <SMBus general purpose I/O> on smbus1
Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo.
Probing for devices on PCI bus 1:
vga0: <Matrox model 051f graphics accelerator> rev 0x00 int a irq 11 on pci1.0.0
Probing for PnP devices:
CSN 1 Vendor ID: CTL00c3 [0xc3008c0e] Serial 0x1fd0a682 Comp ID: PNPb02f [0x2fb0d041]
pcm1 (SB16pnp <SB16 PnP>
sn 0x1fd0a682) at 0x220-0x22f irq 5 drq 1 flags 0x15 on isa
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model Generic PS/2 mouse, device ID 0
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
pcm0 not probed due to drq conflict with pcm1 at 1
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wl0 at 0x300-0x30f irq 7 on isa
wl0: address 08:00:6a:2b:dd:a7, NWID 0xaaaa
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
changing root device to da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST34573LW 5702> Fixed Direct Access SCSI-2 device
da1: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34573LW 5702> Fixed Direct Access SCSI-2 device
da0: 80.0MB/s transfers (40.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4340MB (8888924 512 byte sectors: 255H 63S/T 553C)
cd0 at ahc0 bus 0 target 4 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 20.0MB/s transfers (20.0MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?m105dlx-0008G4C>