Date: Fri, 5 Feb 2016 22:56:45 +0100 From: s.o.k@web.de To: "Marius Strobl" <marius@alchemy.franken.de> Cc: freebsd-current@freebsd.org Subject: Aw: Re: Re: Realtek 8168/8111 if_re not working in current r295091 Message-ID: <trinity-cca34c3e-ebc3-4c38-8f76-a746f2c345f6-1454709405103@3capp-webde-bs40> In-Reply-To: <20160205212912.GI15359@alchemy.franken.de> References: <trinity-abb68349-1869-4b8c-801b-254057609ec8-1454529421824@3capp-webde-bap08> <20160204005132.GA1181@michelle.fasterthan.co.kr> <trinity-5e50b480-a0ec-4575-9d20-ee627a61cdbd-1454702642706@3capp-webde-bs04>, <20160205212912.GI15359@alchemy.franken.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, this is the line from verbose boot: re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem re0: Chip rev. 0x2c800000 re0: MAC rev. 0x00100000 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: OUI 0x00e04c, model 0x0011, rev. 5 so it is an even older rev: 5. I will try reverting to r290946 and r290566 respectivly over the weekend and post my results accordingly. Regards, Stefan PS: I ran accidentally on r290151, as I started syncing and building Current (coming from 10-2 Stable) on Nov 1st; I was distracted over the holiday season and only started updating again a fortnight ago, when I stumbled into the problem with the re driver. > Unfortunately, it doesn't make a whole lot of sense to me; 0x2c800000 > translates to RL_HWREV_8168E_VL, which is an older chip that should > never have required the handling of RTL8168G and later revisions (or > may not actually work when applying it). So r290566 should only make > a positive difference, if it changes anyting for that revision all. > Did the interface work before r290151, or actually before r281337? > Does reverting r290946 and r290566 locally make it work again? > Another candidate causing that breakage would be r291676 if the PHY > is an RTL8211F one. If you boot verbosely, you'll have a line in the > dmesg(8) output with "OUI 0x00e04c" in it. If the "rev." number in > that line is 6, you have an RTL8211F. > > Marius > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?trinity-cca34c3e-ebc3-4c38-8f76-a746f2c345f6-1454709405103>