Date: Wed, 25 Feb 2004 18:18:01 -0800 (PST) From: Doug White <dwhite@gumbysoft.com> To: Ulf Zimmermann <ulf@Alameda.net> Cc: current@FreeBSD.org Subject: Re: ACPI error messages on HP DL140 server Message-ID: <20040225181715.Y44153@carver.gumbysoft.com> In-Reply-To: <20040225214601.GJ89845@seven.alameda.net> References: <20040225214601.GJ89845@seven.alameda.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 25 Feb 2004, Ulf Zimmermann wrote: > I got some HP DL140 servers, single P4-2.4GHz/533 (HT capable), second cpu not > installed. 1GB memory. Below is an ouput of the kernel boot messages. Everything > seems to work, but many messages about ACPI. Should I be worried ? Anyone > interested in checking things out, debugging things before we put this > machine into production ? These are bugs in the AML ... check if there's a BIOS update, maybe. If the machine works, I wouldn't worry too much about it. > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.2.1-RC2 #0: Wed Feb 25 13:25:12 MST 2004 > root@imgphx01.autc.com:/usr/obj/usr/src/sys/IMG > Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a37000. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a37294. > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.34-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C > MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > real memory = 1073676288 (1023 MB) > avail memory = 1033510912 (985 MB) > ACPI APIC Table: <A M I OEMAPIC > > ioapic0 <Version 1.1> irqs 0-15 on motherboard > ioapic1 <Version 1.1> irqs 16-31 on motherboard > ioapic2 <Version 1.1> irqs 32-47 on motherboard > Pentium Pro MTRR support enabled > ACPI-0660: *** Warning: Type override - [DEB_] had invalid type (Integer) fo > r Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [MLIB] had invalid type (Integer) fo > r Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [IO__] had invalid type (Integer) fo > r Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [DATA] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [SIO_] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [SB__] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [PM__] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [ICNT] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [ACPI] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [IORG] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [SB__] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [PM__] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [SIO_] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [PM__] had invalid type (String) for > Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [BIOS] had invalid type (Integer) fo > r Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [CMOS] had invalid type (Integer) fo > r Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [KBC_] had invalid type (Integer) fo > r Scope operator, changed to (Scope) > ACPI-0660: *** Warning: Type override - [OEM_] had invalid type (Integer) fo > r Scope operator, changed to (Scope) > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <A M I OEMRSDT > on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > pcibios: BIOS version 2.10 > Using $PIR table, 3 entries at 0xc00f4630 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_cpu1: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu1 attach returned 6 > acpi_cpu1: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu1 attach returned 6 > acpi_cpu1: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu1 attach returned 6 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib0: slot 15 INTA is routed to irq 10 > pci0: <display, VGA> at device 3.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 15.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <ServerWorks CSB6 UDMA100 controller> port 0xffa0-0xffaf,0x374-0x377,0x > 170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata0: [MPSAFE] > ata1: at 0x170 irq 15 on atapci0 > ata1: [MPSAFE] > ohci0: <OHCI (generic) USB controller> mem 0xfe9fe000-0xfe9fefff irq 10 at devic > e 15.2 on pci0 > usb0: OHCI version 1.0, legacy support > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 4 ports with 4 removable, self powered > pcib1: <ACPI Host-PCI bridge> on acpi0 > pcib1: could not read bus number from config space > pcib1: trying bus number 1 > pci1: <ACPI PCI bus> on pcib1 > pcib2: <ACPI Host-PCI bridge> on acpi0 > pcib2: could not read bus number from config space > pcib2: trying bus number 2 > pci2: <ACPI PCI bus> on pcib2 > bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfebb0000 > -0xfebbffff,0xfebc0000-0xfebcffff irq 19 at device 0.0 on pci2 > bge0: Ethernet address: 00:0e:7f:30:32:aa > miibus0: <MII bus> on bge0 > brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX > -FDX, auto > bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfebe0000 > -0xfebeffff,0xfebf0000-0xfebfffff irq 18 at device 0.1 on pci2 > bge1: Ethernet address: 00:0e:7f:30:32:ab > miibus1: <MII bus> on bge1 > brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX > -FDX, auto > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > acpi_cpu1: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu1 attach returned 6 > acpi_cpu1: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu1 attach returned 6 > acpi_cpu1: <CPU> on acpi0 > device_probe_and_attach: acpi_cpu1 attach returned 6 > orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 > pmtimer0 on isa0 > fdc0: ready for input in output > fdc0: cmd 3 failed at out byte 1 of 3 > ppc0: parallel port not found. > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2399338368 Hz quality 800 > Timecounters tick every 10.000 msec > acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% > GEOM: create disk ad0 dp=0xc6b9e960 > ad0: 238475MB <WDC WD2500PB-55FBA0> [484521/16/63] at ata0-master UDMA100 > GEOM: create disk ad1 dp=0xc6b9e660 > ad1: 238475MB <WDC WD2500PB-55FBA0> [484521/16/63] at ata0-slave UDMA100 > acd0: CDROM <CD-224E> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > > > -- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040225181715.Y44153>