Date: Wed, 25 Jun 2008 06:17:52 GMT From: Alexei Volkov <Alexei.Volkov@softlynx.ru> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/124973: boot order affects geom_journal consumers selection Message-ID: <200806250617.m5P6HqjI024048@www.freebsd.org> Resent-Message-ID: <200806250620.m5P6K0Ns064483@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 124973 >Category: kern >Synopsis: boot order affects geom_journal consumers selection >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Jun 25 06:20:00 UTC 2008 >Closed-Date: >Last-Modified: >Originator: Alexei Volkov >Release: osrelease: 7.0-STABLE osreldate: 700108 >Organization: softlynx >Environment: FreeBSD testhost 7.0-STABLE FreeBSD 7.0-STABLE #0: Mon May 26 12:44:12 UTC 2008 root@builder:/usr/obj/usr/src/sys/GENERIC i386 >Description: The system has hardware RAID controller: atapci0@pci0:1:2:0: class=0x010485 card=0x341b8086 chip=0x7275105a rev=0x01 hdr=0x00 vendor = 'Promise Technology Inc' device = 'PDC20277 FastTrak TX/SBFastTrak133 Lite EIDE Controller' class = mass storage subclass = RAID This controller configured as # atacontrol status ar0 ar0: ATA RAID1 status: READY subdisks: 0 ad4 ONLINE 1 ad6 ONLINE ar0 labeled as # ls -l /dev/ar0* crw-r----- 1 root operator 0, 83 Jun 25 09:22 /dev/ar0 crw-r----- 1 root operator 0, 86 Jun 25 09:22 /dev/ar0s1 crw-r----- 1 root operator 0, 99 Jun 25 13:22 /dev/ar0s1a crw-r----- 1 root operator 0, 100 Jun 25 09:22 /dev/ar0s1b crw-r----- 1 root operator 0, 101 Jun 25 09:22 /dev/ar0s1c crw-r----- 1 root operator 0, 102 Jun 25 09:22 /dev/ar0s1d crw-r----- 1 root operator 0, 103 Jun 25 09:22 /dev/ar0s1e crw-r----- 1 root operator 0, 104 Jun 25 09:22 /dev/ar0s1f And gjournal provider was configured with # gjournal label /dev/ar0s1d # gjournal label /dev/ar0s1e # gjournal label /dev/ar0s1f with subsequent #newfs -J /dev/ar0s1d.journal #newfs -J /dev/ar0s1e.journal #newfs -J /dev/ar0s1f.journal and the /boot/loader.conf has the line geom_journal_load="YES" /etc/fstab as followed: /dev/ar0s1a / ufs rw 1 1 /dev/ar0s1b none swap sw 0 0 /dev/ar0s1d.journal /var ufs rw 2 2 /dev/ar0s1e.journal /tmp ufs rw 2 2 /dev/ar0s1f.journal /usr ufs rw 2 2 /dev/acd0 /cdrom cd9660 ro,noauto 0 0 rebooting is failed due gjournal starts using ad4* as consumers instead ar0* devices. If the geom_journal.ko module loaded not via /boot/loader.conf but from rc.d scripts it consumes right ar0* devices. >How-To-Repeat: Use livefs installation. Manually label file systems as described in full description, install the system and reboot. >Fix: Use special /etc/rc.d/gjournal script instead /boot/loader.conf line. #!/bin/sh # # /etc/rc.d/gjournal # # PROVIDE: gjournal # REQUIRE: localswap # BEFORE: fsck mountcritlocal # KEYWORD: nojail . /etc/rc.subr name="gjournal" start_cmd="gjournal_start" stop_cmd=":" gjournal_start() { echo 'Starting gjournal providers.' /sbin/gjournal load } load_rc_config $name run_rc_command "$1" >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200806250617.m5P6HqjI024048>