Date: Tue, 3 Apr 2001 11:08:02 -0700 (PDT) From: Anil Jangity <aj@entic.net> To: <freebsd-current@freebsd.org> Cc: <aj@entic.net> Subject: More xl0 watchdog timeout probs Message-ID: <Pine.BSF.4.33.0104031105370.3979-100000@mars.entic.net>
next in thread | raw e-mail | index | archive | help
[please include me in Cc as I am not subscribed to the list]
I looked through nearly all threads containing this topic and I am still
stuck. I have tried some of the solutions posted but to no avail:
Src I am using:
Current (Mar 30) SYS/ (April 2)
I am seeing that xl0: chip is in D6 power mode -- setting to D0 notice and
as someone (Bill?) suggested I commented out the power mode check in the
source but no luck.
People have said this could be a IRQ issue and I should try changing
the IRQ but I am not sure how, the bios on here doesn't seem to support
that (Dell Latitude CP). HINTS file was no help.
One thing I noticed:
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11
at device 1.2 on pci0
pccbb0: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pccbb1: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
xl0: <3Com 3c575B Fast Etherlink XL> port 0x3000-0x307f mem
0x44020000-0x4403ffff,0x44002080-0x440020ff,0x44002000-0x4400207f irq 11
at device 0.0 on cardbus0
Why are they ALL using irq11? Are they being shared? Is that normal? I
disabled USB in the kernel but that didn't help this watchdog errors.
Thanks for any help!! and sorry for this repetitous post.
--------------------------------------------------------------------------
FreeBSD 5.0-CURRENT #7: Tue Apr 3 09:26:24 PDT 2001
root@mums.synopsys.com:/usr/src/sys/compile/mums
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 233864369 Hz
CPU: Pentium/P55C (quarter-micron) (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 61321216 (59884K bytes)
Preloaded elf kernel "kernel" at 0xc03b6000.
Intel Pentium detected, installing workaround for F00F bug
Using $PIR table, 5 entries at 0xc00fb950
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 1.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11
at device 1.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x840-0x84f irq 9
at device 1.3 on pci0
intpm0: I/O mapped 840
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 800
pci0: <display, VGA> at 2.0 (no driver attached)
pccbb0: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
pccbb0: PCI Memory allocated: 44000000
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccbb0: WARNING: cannot attach pccard bus.
pccbb1: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pccbb1: PCI Memory allocated: 44001000
cardbus1: <Cardbus bus (newcard)> on pccbb1
pccbb1: WARNING: cannot attach pccard bus.
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pmtimer0 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
unknown: <PNP0c01> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
atspeaker0: <AT speaker> at port 0x61 on isa0
unknown: <PNP0501> can't assign resources
ppc0: <ECP parallel printer port> at port 0x378-0x37f,0x778-0x77b irq 7
drq 3 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0700> can't assign resources
IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled
ad0: 3102MB <IBM-DTCA-23240> [6304/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
pccbb0: card inserted: event=0x00000000, state=30000820
pccbb0: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_VCC [11]
TUPLE: LINKTARGET [3]: 43 49 53
Manufacturer ID: 01015751
TUPLE: CONFIG_CB [6]: 03 01 00 00 00 00
TUPLE: CFTABLE_ENTRY_CB [12]: 41 9a 01 b5 1e 01 55 02 30 ff ff 01
cardbus0: Opening BAR: type=IO, bar=10, len=0040
Product version: 5.0
Product name: 3Com Corporation | 3CCFE575BT | LAN Cardbus Card | 001 |
Functions: Network Adaptor, Memory
TUPLE: CFTABLE_ENTRY_CB [6]: 00 80 80 80 80 19
CIS reading done
xl0: <3Com 3c575B Fast Etherlink XL> port 0x3000-0x307f mem
0x44020000-0x4403ffff,0x44002080-0x440020ff,0x44002000-0x4400207f irq 11
at device 0.0 on cardbus0
xl0: chip is in D6 power mode -- setting to D0
xl0: Ethernet address: 00:50:04:29:ac:2e
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cardbus1: Detaching card: no cards to detach!
pccbb1: pccbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
xl0: watchdog timeout
xl0: watchdog timeout
xl0: no carrier - transceiver cable problem?
HINTS:
hint.fdc.0.at="isa"
hint.fdc.0.port="0x3F0"
hint.fdc.0.irq="6"
hint.fdc.0.drq="2"
hint.fd.0.at="fdc0"
hint.fd.0.drive="0"
hint.ata.0.at="isa"
hint.ata.0.port="0x1F0"
hint.ata.0.irq="14"
hint.ata.1.at="isa"
hint.ata.1.port="0x170"
hint.ata.1.irq="15"
hint.ata.1.disabled="1"
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
hint.atkbd.0.flags="0x1"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.vga.0.at="isa"
hint.sc.0.at="isa"
hint.sc.0.flags="0x100"
hint.vt.0.at="isa"
hint.pmtimer.0.at="isa"
hint.npx.0.at="nexus"
hint.npx.0.port="0x0F0"
hint.npx.0.irq="13"
hint.apm.0.at="nexus"
hint.apm.0.flags="0x20"
hint.pcic.0.at="isa"
hint.pcic.0.irq="0"
hint.pcic.0.port="0x3e0"
hint.pcic.0.maddr="0xd0000"
hint.pcic.1.at="isa"
hint.pcic.1.irq="7"
hint.pcic.1.port="0x3e2"
hint.pcic.1.maddr="0xd4000"
hint.sio.0.at="isa"
hint.sio.0.port="0x3F8"
hint.sio.0.flags="0x10"
hint.sio.0.irq="4"
hint.sio.1.at="isa"
hint.sio.1.port="0x2F8"
hint.sio.1.irq="3"
hint.sio.2.at="isa"
hint.sio.2.disabled="1"
hint.sio.2.port="0x3E8"
hint.sio.2.irq="5"
hint.sio.3.at="isa"
hint.sio.3.disabled="1"
hint.sio.3.port="0x2E8"
hint.sio.3.irq="9"
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.33.0104031105370.3979-100000>