Date: Tue, 26 Oct 2010 12:01:14 +0000 From: Paul B Mahol <onemda@gmail.com> To: Jakub Lach <jakub_lach@mailplus.pl> Cc: freebsd-stable@freebsd.org Subject: Re: cdrtools /devel and wodim broken Message-ID: <AANLkTin=WJv3HcyhQMRYsTVa3O_6AnLgEQFV5vV46pXO@mail.gmail.com> In-Reply-To: <30056250.post@talk.nabble.com> References: <29978939.post@talk.nabble.com> <4cc69e5f.gNWjuvNN/eQJQ0Qi%Joerg.Schilling@fokus.fraunhofer.de> <30056250.post@talk.nabble.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/26/10, Jakub Lach <jakub_lach@mailplus.pl> wrote: > > > Joerg Schilling-3 wrote: >> >> wodim is a dead end from a 6 year old version of cdrecord with the DVD >> support >> ripped off and replaced by something broken. But there have been even more >> bugs >> added to wodim and it is not under "development" since May 2007. >> >> If cdrecord gives the same message, I encourage you to make a kernel bug >> report. >> This message is a hint to a serious kernel problem. A sense key value -1 >> cannot >> happen, so you need to find out why the SCSI command has not been >> transported >> correctly by the kernel. >> > > Hi Joerg. > > I usually prefer cdrtools, wodim was convenient way to > try old code. > > After booting GENERIC kernel + ahci driver and compiling > cdrtools release problem is still present. > > Full message. > > cdrecord: No write mode specified. > cdrecord: Assuming -sao mode. > cdrecord: If your drive does not accept -sao, try -tao. > cdrecord: Future versions of cdrecord may have different drive dependent > defaults. > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.1) Copyright (C) > 1995-2010 Joerg Schilling > TOC Type: 1 = CD-ROM > scsidev: '1,0,0' > scsibus: 1 target: 0 lun: 0 > Using libscg version 'schily-0.9'. > SCSI buffer size: 65536 > atapi: 0 > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : 'HL-DT-ST' > Identifikation : 'DVDRAM GSA-U20N ' > Revision : 'HX11' > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > Current: DVD-R sequential recording > Profile: DVD-RAM > Profile: DVD-R sequential recording (current) > Profile: DVD-R/DL sequential recording > Profile: DVD-R/DL layer jump recording > Profile: DVD-RW sequential recording > Profile: DVD-RW restricted overwrite > Profile: DVD+RW > Profile: DVD+R > Profile: DVD+R/DL > Profile: DVD-ROM > Profile: CD-R > Profile: CD-RW > Profile: CD-ROM > Profile: Removable Disk > Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). > Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE > Supported modes: PACKET SAO LAYER_JUMP > Drive buf size : 1114112 = 1088 KB > Drive pbuf size: 1966080 = 1920 KB > Drive DMA Speed: 15100 kB/s 85x CD 10x DVD 3x BD > FIFO size : 4194304 = 4096 KB > Track 01: data 2858 MB > Total size: 2858 MB = 1463428 sectors > Current Secsize: 2048 > Total power on hours: 0 > Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 835068 > Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > BURN-Free is ON. > Turning BURN-Free off > Starting new track at sector: 0 > Track 01: 0 of 2858 MB written.cdrecord: Input/output error. write_g1: > scsi sendcmd: retryable error > CDB: 2A 00 00 00 00 00 00 00 20 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 23.946s timeout 200s > > write track data: error after 0 bytes > cdrecord: A write error occured. > cdrecord: Please properly read the error message above. > Writing time: 29.002s > Average write speed 74.7x. > Fixating... > Fixating time: 22.355s > cdrecord: fifo had 64 puts and 1 gets. > cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > > I destroyed all my spare media, so I'm also spared from burning problems > for now ;) And what kind of spare media was that? > I'm quite puzzled that only I have reported such problems, > it's like I'm on CURRENT again.. I burned bunch of DVD-R, DVD+R and DVD+R DL on FreeBSD 9.0 without any problems, using growisofs from ports. Only problem I ever had was mounting multi-sesion after 4GB (but -r flag is nice workaround).
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTin=WJv3HcyhQMRYsTVa3O_6AnLgEQFV5vV46pXO>