Date: Fri, 23 Mar 2012 14:43:37 +0100 From: Luca Pizzamiglio <l.pizzamiglio@bally-wulff.de> To: lial <lial@yeah.net> Cc: freebsd-x11@freebsd.org Subject: Re: Intel GPU patch 13.5 for stable/9 ([CFT] Xorg Upgrade 7.5.2) Message-ID: <4F6C7E09.3030406@bally-wulff.de> In-Reply-To: <1332504957141-5589273.post@n5.nabble.com> References: <1332504957141-5589273.post@n5.nabble.com>
next in thread | previous in thread | raw e-mail | index | archive | help
AFAIK, the vt switch is not yet implemented. and, when I unload the module I get panic too (I guess is a problem with i2c modules). Best regards, Luca On 03/23/12 13:15, lial wrote: > Hello all: > I'v patch 13.5 for stable/9 for my Lenovo x201i Notebook ,I make build > kernel and Xorg 7.5.2 WITH_KMS=yes WITH_NEW_XORG=yes , the driver of Video > is xf86-video-intel-2.17.0 .When I start X ,I found: > 1. I can't switch to other ttys; > 2. When I quit FVWM2.64 ,the system halted; > any advice? > > #dmesg > Copyright (c) 1992-2012 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 9.0-STABLE #1: Tue Mar 13 16:20:32 UTC 2012 > root@lial.lialdomain:/usr/obj/usr/src/stable/9/sys/GENERIC i386 > CPU: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz (2261.06-MHz 686-class > CPU) > Origin = "GenuineIntel" Id = 0x20655 Family = 6 Model = 25 Stepping = > 5 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT> > AMD Features=0x28100000<NX,RDTSCP,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant, performance statistics > real memory = 2147483648 (2048 MB) > avail memory = 1942237184 (1852 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table:<LENOVO TP-6Q> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 4 > cpu3 (AP): APIC ID: 5 > ioapic0: Changing APIC ID to 1 > ioapic0<Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ctl: CAM Target Layer loaded > acpi0:<LENOVO TP-6Q> on motherboard > acpi_ec0:<Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, 7bf00000 (3) failed > cpu0:<ACPI CPU> on acpi0 > cpu1:<ACPI CPU> on acpi0 > cpu2:<ACPI CPU> on acpi0 > cpu3:<ACPI CPU> on acpi0 > attimer0:<AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > hpet0:<High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 550 > Event timer "HPET1" frequency 14318180 Hz quality 440 > Event timer "HPET2" frequency 14318180 Hz quality 440 > Event timer "HPET3" frequency 14318180 Hz quality 440 > Event timer "HPET4" frequency 14318180 Hz quality 440 > atrtc0:<AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0:<24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 > acpi_lid0:<Control Method Lid Switch> on acpi0 > acpi_button0:<Sleep Button> on acpi0 > pcib0:<ACPI Host-PCI bridge> on acpi0 > pci255:<ACPI PCI bus> on pcib0 > pcib1:<ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0:<ACPI PCI bus> on pcib1 > vgapci0:<VGA-compatible display> port 0x1800-0x1807 mem > 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 > agp0:<Intel Ironlake (M) SVGA controller> on vgapci0 > agp0: aperture size is 256M, detected 32764k stolen memory > pci0:<simple comms> at device 22.0 (no driver attached) > em0:<Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1820-0x183f mem > 0xf2500000-0xf251ffff,0xf2525000-0xf2525fff irq 20 at device 25.0 on pci0 > em0: Using an MSI interrupt > em0: Ethernet address: f0:de:f1:04:06:a6 > ehci0:<Intel PCH USB 2.0 controller USB-B> mem 0xf2728000-0xf27283ff irq 23 > at device 26.0 on pci0 > usbus0: EHCI version 1.0 > usbus0:<Intel PCH USB 2.0 controller USB-B> on ehci0 > hdac0:<Intel 5 Series/3400 Series High Definition Audio Controller> mem > 0xf2520000-0xf2523fff irq 17 at device 27.0 on pci0 > pcib2:<ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 > pci13:<ACPI PCI bus> on pcib2 > pcib3:<ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 > pci5:<ACPI PCI bus> on pcib3 > pcib4:<ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0 > pci2:<ACPI PCI bus> on pcib4 > iwn0:<Intel(R) Centrino(R) Wireless-N 1000> mem 0xf2400000-0xf2401fff irq > 16 at device 0.0 on pci2 > ehci1:<Intel PCH USB 2.0 controller USB-A> mem 0xf2728400-0xf27287ff irq 19 > at device 29.0 on pci0 > usbus1: EHCI version 1.0 > usbus1:<Intel PCH USB 2.0 controller USB-A> on ehci1 > pcib5:<ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci14:<ACPI PCI bus> on pcib5 > isab0:<PCI-ISA bridge> at device 31.0 on pci0 > isa0:<ISA bus> on isab0 > ahci0:<Intel 5 Series/3400 Series AHCI SATA controller> port > 0x1860-0x1867,0x1814-0x1817,0x1818-0x181f,0x1810-0x1813,0x1840-0x185f mem > 0xf2727000-0xf27277ff irq 16 at device 31.2 on pci0 > ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported > ahcich0:<AHCI channel> at channel 0 on ahci0 > ahcich1:<AHCI channel> at channel 1 on ahci0 > ahcich4:<AHCI channel> at channel 4 on ahci0 > ahcich5:<AHCI channel> at channel 5 on ahci0 > pci0:<serial bus, SMBus> at device 31.3 (no driver attached) > pci0:<dasp> at device 31.6 (no driver attached) > acpi_tz0:<Thermal Zone> on acpi0 > atkbdc0:<Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0:<AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0:<PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > battery0:<ACPI Control Method Battery> on acpi0 > acpi_acad0:<AC Adapter> on acpi0 > pmtimer0 on isa0 > orm0:<ISA Option ROMs> at iomem > 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdd000-0xdffff,0xe0000-0xeffff > pnpid ORM0000 on isa0 > sc0:<System console> at flags 0x100 on isa0 > sc0: VGA<16 virtual consoles, flags=0x300> > vga0:<Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ata0:<ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 > ata1:<ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 > ppc0: parallel port not found. > est0:<Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0:<CPU Frequency Thermal Control> on cpu0 > est1:<Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1:<CPU Frequency Thermal Control> on cpu1 > est2:<Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2:<CPU Frequency Thermal Control> on cpu2 > est3:<Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3:<CPU Frequency Thermal Control> on cpu3 > Timecounters tick every 1.000 msec > hdac0: HDA Codec #0: Conexant CX20585 > hdac0: HDA Codec #3: Intel Ibex Peak HDMI > pcm0:<HDA Conexant CX20585 PCM #0 Analog> at cad 0 nid 1 on hdac0 > pcm1:<HDA Conexant CX20585 PCM #1 Analog> at cad 0 nid 1 on hdac0 > pcm2:<HDA Intel Ibex Peak HDMI PCM #0 DisplayPort> at cad 3 nid 1 on hdac0 > usbus0: 480Mbps High Speed USB v2.0 > usbus1: 480Mbps High Speed USB v2.0 > ugen0.1:<Intel> at usbus0 > uhub0:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 > ugen1.1:<Intel> at usbus1 > uhub1:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 > uhub0: 3 ports with 3 removable, self powered > uhub1: 3 ports with 3 removable, self powered > ugen0.2:<vendor 0x8087> at usbus0 > uhub2:<vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on > usbus0 > ugen1.2:<vendor 0x8087> at usbus1 > uhub3:<vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on > usbus1 > uhub2: 6 ports with 6 removable, self powered > uhub3: 8 ports with 8 removable, self powered > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0:<SAMSUNG HM250HI 2AC101C4> ATA-8 SATA 2.x device > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #2 Launched! > Trying to mount root from ufs:/dev/ada0s1a [rw]... > drm0:<Intel IronLake> on vgapci0 > info: [drm] MSI enabled 1 message(s) > info: [drm] AGP at 0xd0000000 256MB > iicbus0:<Philips I2C bus> on iicbb0 addr 0xc8 > iic0:<I2C generic I/O> on iicbus0 > iic1:<I2C generic I/O> on iicbus1 > iicbus2:<Philips I2C bus> on iicbb1 addr 0x0 > iic2:<I2C generic I/O> on iicbus2 > iic3:<I2C generic I/O> on iicbus3 > iicbus4:<Philips I2C bus> on iicbb2 addr 0x0 > iic4:<I2C generic I/O> on iicbus4 > iic5:<I2C generic I/O> on iicbus5 > iicbus6:<Philips I2C bus> on iicbb3 addr 0x0 > iic6:<I2C generic I/O> on iicbus6 > iic7:<I2C generic I/O> on iicbus7 > iicbus8:<Philips I2C bus> on iicbb4 addr 0x0 > iic8:<I2C generic I/O> on iicbus8 > iic9:<I2C generic I/O> on iicbus9 > iicbus10:<Philips I2C bus> on iicbb5 addr 0x0 > iic10:<I2C generic I/O> on iicbus10 > iic11:<I2C generic I/O> on iicbus11 > iicbus12:<Philips I2C bus> on iicbb6 addr 0x0 > iic12:<I2C generic I/O> on iicbus12 > iic13:<I2C generic I/O> on iicbus13 > iicbus14:<Philips I2C bus> on iicbb7 addr 0x0 > iic14:<I2C generic I/O> on iicbus14 > iic15:<I2C generic I/O> on iicbus15 > info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > info: [drm] Driver supports precise vblank timestamp query. > [drm:KMS:pid2520:intel_detect_pch] Found Ibex Peak PCH > [drm:KMS:pid2520:init_vbt_defaults] Set default to SSC at 100MHz > [drm:KMS:pid2520:intel_parse_bios] Using VBT from OpRegion: $VBT > IRONLAKE-MOBILEd > [drm:KMS:pid2520:parse_general_features] BDB_GENERAL_FEATURES int_tv_support > 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 > [drm:KMS:pid2520:parse_general_definitions] crt_ddc_bus_pin: 2 > [drm:KMS:pid2520:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 69300 > 1280 1304 1336 1408 800 804 808 820 0x8 0xa > [drm:KMS:pid2520:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT > tables: > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 > 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa > [drm:KMS:pid2520:parse_sdvo_device_mapping] No SDVO device info is found in > VBT > [drm:KMS:pid2520:intel_modeset_init] 2 display pipes available. > [drm:KMS:pid2520:intel_modeset_init] plane 0 init failed: -19 > [drm:KMS:pid2520:intel_modeset_init] plane 1 init failed: -19 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 0 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 0 > [drm:KMS:pid2520:intel_crt_init] pch crt adpa set to 0xf40018 > [drm:KMS:pid2520:intel_setup_outputs] HDMIB 0 PCH_DP_B 0 HDMIC 1 HDMID 0 > PCH_DP_C 1 PCH_DP_D 0 LVDS 1 > [drm:KMS:pid2520:intel_dp_i2c_init] i2c_init DPDDC-C > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_i2c_aux_ch] aux_ch failed -60 > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_i2c_aux_ch] aux_ch failed -60 > [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms off > [drm:KMS:pid2520:intel_update_fbc] > [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 1/1 dpms off > [drm:KMS:pid2520:intel_update_fbc] > [drm:KMS:pid2520:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 > has_pch_edp 0 has_cpu_edp 0 has_ck505 0 > drm0: taking over the fictitious range 0xd0000000-0xe0000000 > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:5:LVDS-1] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:5:LVDS-1] probed modes : > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50 > 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5 > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60 > 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5 > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] > [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] trigger hotplug detect > cycle: adpa=0xf40018 > [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug > adpa=0xf40018, result 0 > [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] disconnected > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 > [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc > port 4 > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] disconnected > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] disconnected > [drm:KMS:pid2520:drm_setup_crtcs] > [drm:KMS:pid2520:drm_enable_connectors] connector 5 enabled? yes > [drm:KMS:pid2520:drm_enable_connectors] connector 12 enabled? no > [drm:KMS:pid2520:drm_enable_connectors] connector 15 enabled? no > [drm:KMS:pid2520:drm_enable_connectors] connector 18 enabled? no > [drm:KMS:pid2520:drm_target_preferred] looking for cmdline mode on connector > 5 > [drm:KMS:pid2520:drm_target_preferred] looking for preferred mode on > connector 5 > [drm:KMS:pid2520:drm_target_preferred] found mode 1280x800 > [drm:KMS:pid2520:drm_setup_crtcs] picking CRTCs for 8192x8192 config > [drm:KMS:pid2520:drm_setup_crtcs] desired mode 1280x800 set on crtc 3 > [drm:KMS:pid2520:intelfb_create] allocated 1280x800 fb: 0x00043000, bo > 0xc8135b00 > info: [drm] Initialized i915 1.6.0 20080730 > [drm:KMS:pid2520:i915_getparam] Unknown parameter 17 > [drm:KMS:pid2520:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] > [drm:KMS:pid2520:drm_mode_getresources] [CRTC:3] > [drm:KMS:pid2520:drm_mode_getresources] [CRTC:4] > [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:6:LVDS-6] > [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:13:DAC-13] > [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:14:TMDS-14] > [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:19:TMDS-19] > [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:5:LVDS-1] > [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:12:VGA-1] > [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:15:HDMI-A-1] > [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:18:DP-1] > [drm:KMS:pid2520:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:5:LVDS-1] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:5:LVDS-1] probed modes : > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60 > 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5 > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50 > 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5 > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?] > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] > [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug > adpa=0xf40018, result 0 > [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] > [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug > adpa=0xf40018, result 0 > [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 > [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc > port 4 > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 > [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc > port 4 > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:5:LVDS-1] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:5:LVDS-1] probed modes : > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60 > 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5 > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50 > 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5 > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?] > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] > [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug > adpa=0xf40018, result 0 > [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] > [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug > adpa=0xf40018, result 0 > [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:12:VGA-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 > [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc > port 4 > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 > [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 > [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc > port 4 > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:15:HDMI-A-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] disconnected > [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?] > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] > [CONNECTOR:18:DP-1] disconnected > [drm:KMS:pid2520:drm_mode_addfb] [FB:22] > [drm:KMS:pid2520:drm_mode_setcrtc] [CRTC:3] > [drm:KMS:pid2520:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1] > [drm:KMS:pid2520:drm_crtc_helper_set_config] > [drm:KMS:pid2520:drm_crtc_helper_set_config] [CRTC:3] [FB:22] #connectors=1 > (x y) (0 0) > [drm:KMS:pid2520:drm_crtc_helper_set_config] crtc has no fb, full mode set > [drm:KMS:pid2520:drm_crtc_helper_set_config] modes are different, full mode > set > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 > 0 0 0x0 0x0 > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0 > 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5 > [drm:KMS:pid2520:drm_crtc_helper_set_config] encoder changed, full mode > switch > [drm:KMS:pid2520:drm_crtc_helper_set_config] crtc changed, full mode switch > [drm:KMS:pid2520:drm_crtc_helper_set_config] [CONNECTOR:5:LVDS-1] to > [CRTC:3] > [drm:KMS:pid2520:drm_crtc_helper_set_config] attempting to set mode from > userspace > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0 > 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5 > [drm:KMS:pid2520:drm_crtc_helper_set_mode] [CRTC:3] > [drm:KMS:pid2520:ironlake_get_refclk] using SSC reference clock of 120 MHz > [drm:KMS:pid2520:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) > to LVDS (6) > [drm:KMS:pid2520:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max > display bpc 6) > [drm:KMS:pid2520:ironlake_crtc_mode_set] Mode for pipe 0: > [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0 > 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5 > [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out > [drm:KMS:pid2520:ironlake_update_plane] Writing base 0042B000 00000000 0 0 > 5120 > [drm:KMS:pid2520:intel_update_fbc] > [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6, > cursor: 6 > [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc > lines 3, cursor 6 > [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc > lines 3, cursor 6 > [drm:KMS:pid2520:drm_crtc_helper_set_mode] [ENCODER:6:LVDS-6] set > [MODE:23:1280x800] > [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6, > cursor: 6 > [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc > lines 3, cursor 6 > [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc > lines 3, cursor 6 > [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out > [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x700 > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 1 done. > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x600 > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 2 done. > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train done > [drm:KMS:pid2520:intel_update_fbc] > [drm:KMS:pid2520:drm_crtc_helper_set_config] Setting connector DPMS state to > on > [drm:KMS:pid2520:drm_crtc_helper_set_config] [CONNECTOR:5:LVDS-1] set DPMS > on > [drm:KMS:pid2520:intel_crtc_cursor_set] > [drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug > adpa=0xf40018, result 0 > [drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug > [drm:KMS:pid0:output_poll_execute] [CONNECTOR:12:VGA-1] status updated from > 2 to 2 > [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 > [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 > [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 > [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 > [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 > [drm:KMS:pid0:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc > port 4 > [drm:KMS:pid0:output_poll_execute] [CONNECTOR:15:HDMI-A-1] status updated > from 2 to 2 > [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e > [drm:KMS:pid0:output_poll_execute] [CONNECTOR:18:DP-1] status updated from 2 > to 2 > [drm:KMS:pid2520:intel_crtc_cursor_set] > [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off > [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms off > [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out > [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6, > cursor: 6 > [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc > lines 3, cursor 6 > [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc > lines 3, cursor 6 > [drm:KMS:pid2520:intel_update_fbc] > [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms on > [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6, > cursor: 6 > [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc > lines 3, cursor 6 > [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc > lines 3, cursor 6 > [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out > [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x100 > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 1 done. > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x600 > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 2 done. > [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train done > [drm:KMS:pid2520:intel_update_fbc] > [drm:KMS:pid2520:intel_crtc_cursor_set] > wlan0: link state changed to DOWN > wlan0: link state changed to UP > [drm:KMS:pid2520:intel_crtc_cursor_set] > [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off > [drm:KMS:pid2520:intel_crtc_cursor_set] > [drm:KMS:pid2520:intel_crtc_cursor_set] > [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off > [drm:KMS:pid2520:intel_crtc_cursor_set] > [drm:KMS:pid2520:intel_crtc_cursor_set] > [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off > > #cat /var/log/Xorg.0.log > X.Org X Server 1.10.6 > Release Date: 2012-02-10 > [ 7565.306] X Protocol Version 11, Revision 0 > [ 7565.306] Build Operating System: FreeBSD 9.0-STABLE i386 > [ 7565.306] Current Operating System: FreeBSD lial.lialdomain 9.0-STABLE > FreeBSD 9.0-STABLE #1: Tue Mar 13 16:20:32 UTC 2012 > root@lial.lialdomain:/usr/obj/usr/src/stable/9/sys/GENERIC i386 > [ 7565.306] Build Date: 13 March 2012 09:36:38PM > [ 7565.306] > [ 7565.306] Current version of pixman: 0.24.2 > [ 7565.306] Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > [ 7565.306] Markers: (--) probed, (**) from config file, (==) default > setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > [ 7565.306] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 17:59:08 > 2012 > [ 7565.390] (==) Using config file: "/etc/X11/xorg.conf" > [ 7565.412] (==) ServerLayout "X.org Configured" > [ 7565.412] (**) |-->Screen "Screen0" (0) > [ 7565.412] (**) | |-->Monitor "Monitor0" > [ 7565.412] (**) | |-->Device "Card0" > [ 7565.412] (**) |-->Input Device "Mouse0" > [ 7565.412] (**) |-->Input Device "Keyboard0" > [ 7565.412] (**) Option "AutoAddDevices" "FALSE" > [ 7565.412] (**) Not automatically adding devices > [ 7565.412] (==) Automatically enabling devices > [ 7565.521] (WW) The directory "/usr/local/lib/X11/fonts/msdos/" does not > exist. > [ 7565.521] Entry deleted from font path. > [ 7565.580] (**) FontPath set to: > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/wqy/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/, > ${prefix}/share/fonts/X11/misc/, > ${prefix}/share/fonts/X11/TTF/, > ${prefix}/share/fonts/X11/OTF/, > ${prefix}/share/fonts/X11/Type1/, > ${prefix}/share/fonts/X11/100dpi/, > ${prefix}/share/fonts/X11/75dpi/ > [ 7565.580] (**) ModulePath set to "/usr/local/lib/xorg/modules" > [ 7565.580] (II) Loader magic: 0x81ef100 > [ 7565.580] (II) Module ABI versions: > [ 7565.580] X.Org ANSI C Emulation: 0.4 > [ 7565.580] X.Org Video Driver: 10.0 > [ 7565.580] X.Org XInput driver : 12.2 > [ 7565.580] X.Org Server Extension : 5.0 > [ 7565.580] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ > 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ > 0x????????/65536 > [ 7565.580] (II) "extmod" will be loaded. This was enabled by default and > also specified in the config file. > [ 7565.580] (II) "dbe" will be loaded. This was enabled by default and also > specified in the config file. > [ 7565.580] (II) "glx" will be loaded. This was enabled by default and also > specified in the config file. > [ 7565.580] (II) "record" will be loaded. This was enabled by default and > also specified in the config file. > [ 7565.580] (II) "dri" will be loaded. This was enabled by default and also > specified in the config file. > [ 7565.580] (II) "dri2" will be loaded. This was enabled by default and > also specified in the config file. > [ 7565.580] (II) LoadModule: "extmod" > [ 7565.613] (II) Loading > /usr/local/lib/xorg/modules/extensions/libextmod.so > [ 7565.615] (II) Module extmod: vendor="X.Org Foundation" > [ 7565.615] compiled for 1.10.6, module version = 1.0.0 > [ 7565.615] Module class: X.Org Server Extension > [ 7565.615] ABI class: X.Org Server Extension, version 5.0 > [ 7565.615] (II) Loading extension MIT-SCREEN-SAVER > [ 7565.615] (II) Loading extension XFree86-VidModeExtension > [ 7565.615] (II) Loading extension XFree86-DGA > [ 7565.615] (II) Loading extension DPMS > [ 7565.615] (II) Loading extension XVideo > [ 7565.615] (II) Loading extension XVideo-MotionCompensation > [ 7565.615] (II) Loading extension X-Resource > [ 7565.615] (II) LoadModule: "record" > [ 7565.615] (II) Loading > /usr/local/lib/xorg/modules/extensions/librecord.so > [ 7565.617] (II) Module record: vendor="X.Org Foundation" > [ 7565.617] compiled for 1.10.6, module version = 1.13.0 > [ 7565.617] Module class: X.Org Server Extension > [ 7565.617] ABI class: X.Org Server Extension, version 5.0 > [ 7565.617] (II) Loading extension RECORD > [ 7565.617] (II) LoadModule: "dbe" > [ 7565.618] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so > [ 7565.618] (II) Module dbe: vendor="X.Org Foundation" > [ 7565.618] compiled for 1.10.6, module version = 1.0.0 > [ 7565.618] Module class: X.Org Server Extension > [ 7565.618] ABI class: X.Org Server Extension, version 5.0 > [ 7565.618] (II) Loading extension DOUBLE-BUFFER > [ 7565.618] (II) LoadModule: "glx" > [ 7565.618] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so > [ 7565.624] (II) Module glx: vendor="X.Org Foundation" > [ 7565.624] compiled for 1.10.6, module version = 1.0.0 > [ 7565.624] ABI class: X.Org Server Extension, version 5.0 > [ 7565.624] (==) AIGLX disabled > [ 7565.624] (II) Loading extension GLX > [ 7565.625] (II) LoadModule: "dri" > [ 7565.625] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so > [ 7565.643] (II) Module dri: vendor="X.Org Foundation" > [ 7565.643] compiled for 1.10.6, module version = 1.0.0 > [ 7565.643] ABI class: X.Org Server Extension, version 5.0 > [ 7565.643] (II) Loading extension XFree86-DRI > [ 7565.643] (II) LoadModule: "dri2" > [ 7565.644] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so > [ 7565.644] (II) Module dri2: vendor="X.Org Foundation" > [ 7565.644] compiled for 1.10.6, module version = 1.2.0 > [ 7565.644] ABI class: X.Org Server Extension, version 5.0 > [ 7565.644] (II) Loading extension DRI2 > [ 7565.644] (II) LoadModule: "intel" > [ 7565.660] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so > [ 7565.699] (II) Module intel: vendor="X.Org Foundation" > [ 7565.699] compiled for 1.10.6, module version = 2.17.0 > [ 7565.699] Module class: X.Org Video Driver > [ 7565.699] ABI class: X.Org Video Driver, version 10.0 > [ 7565.699] (II) LoadModule: "mouse" > [ 7565.699] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so > [ 7565.700] (II) Module mouse: vendor="X.Org Foundation" > [ 7565.700] compiled for 1.10.6, module version = 1.7.1 > [ 7565.700] Module class: X.Org XInput Driver > [ 7565.700] ABI class: X.Org XInput driver, version 12.2 > [ 7565.700] (II) LoadModule: "kbd" > [ 7565.700] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so > [ 7565.701] (II) Module kbd: vendor="X.Org Foundation" > [ 7565.701] compiled for 1.10.6, module version = 1.6.1 > [ 7565.701] Module class: X.Org XInput Driver > [ 7565.701] ABI class: X.Org XInput driver, version 12.2 > [ 7565.701] (II) intel: Driver for Intel Integrated Graphics Chipsets: > i810, > i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, > E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, > 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, > 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, > Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), > Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), > Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), > Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), > Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server > [ 7565.701] (--) Using syscons driver with X support (version 2.0) > [ 7565.701] (--) using VT number 9 > > [ 7565.726] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so > [ 7565.726] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card > support > [ 7565.727] drmOpenDevice: node name is /dev/dri/card0 > [ 7565.727] Failed to change owner or group for file /dev/dri! 2: No such > file or directory > [ 7565.727] Failed to change owner or group for file /dev/dri/card0! 2: No > such file or directory > [ 7565.727] drmOpenDevice: open result is -1, (No such file or directory) > [ 7565.727] Failed to change owner or group for file /dev/dri/card0! 2: No > such file or directory > [ 7565.727] drmOpenDevice: open result is -1, (No such file or directory) > [ 7565.727] drmOpenDevice: Open failed > [ 7566.864] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > [ 7566.864] drmOpenDevice: node name is /dev/dri/card0 > [ 7566.864] drmOpenDevice: open result is 10, (OK) > [ 7566.864] drmOpenByBusid: drmOpenMinor returns 10 > [ 7566.864] drmOpenByBusid: Interface 1.4 failed, trying 1.1 > [ 7566.864] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > [ 7566.864] (==) intel(0): Depth 24, (--) framebuffer bpp 32 > [ 7566.864] (==) intel(0): RGB weight 888 > [ 7566.864] (==) intel(0): Default visual is TrueColor > [ 7566.864] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale > [ 7566.864] (--) intel(0): Chipset: "Arrandale" > [ 7566.865] (**) intel(0): Relaxed fencing enabled > [ 7566.865] (**) intel(0): Wait on SwapBuffers? enabled > [ 7566.865] (**) intel(0): Triple buffering? enabled > [ 7566.865] (**) intel(0): Framebuffer tiled > [ 7566.865] (**) intel(0): Pixmaps tiled > [ 7566.865] (**) intel(0): 3D buffers tiled > [ 7566.865] (**) intel(0): SwapBuffers wait enabled > [ 7566.865] (==) intel(0): video overlay key set to 0x101fe > [ 7566.865] (II) intel(0): Output LVDS1 using monitor section Monitor0 > [ 7566.897] (II) intel(0): Output VGA1 has no monitor section > [ 7566.907] (II) intel(0): Output HDMI1 has no monitor section > [ 7566.913] (II) intel(0): Output DP1 has no monitor section > [ 7566.913] (II) intel(0): EDID for output LVDS1 > [ 7566.913] (II) intel(0): Manufacturer: LEN Model: 4011 Serial#: 0 > [ 7566.913] (II) intel(0): Year: 2009 Week: 0 > [ 7566.913] (II) intel(0): EDID Version: 1.3 > [ 7566.913] (II) intel(0): Digital Display Input > [ 7566.913] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16 > [ 7566.914] (II) intel(0): Gamma: 2.20 > [ 7566.914] (II) intel(0): DPMS capabilities: StandBy Suspend Off > [ 7566.914] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 > [ 7566.914] (II) intel(0): First detailed timing is preferred mode > [ 7566.914] (II) intel(0): redX: 0.592 redY: 0.351 greenX: 0.334 greenY: > 0.549 > [ 7566.914] (II) intel(0): blueX: 0.154 blueY: 0.130 whiteX: 0.313 > whiteY: 0.329 > [ 7566.914] (II) intel(0): Manufacturer's mask: 0 > [ 7566.914] (II) intel(0): Supported detailed timing: > [ 7566.914] (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm > [ 7566.914] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 > h_blank_end 1408 h_border: 0 > [ 7566.914] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 > v_blanking: 820 v_border: 0 > [ 7566.914] (II) intel(0): Supported detailed timing: > [ 7566.914] (II) intel(0): clock: 57.8 MHz Image Size: 261 x 163 mm > [ 7566.914] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 > h_blank_end 1408 h_border: 0 > [ 7566.914] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 > v_blanking: 820 v_border: 0 > [ 7566.914] (II) intel(0): Unknown vendor-specific block f > [ 7566.914] (II) intel(0): LP121WX3-TLC1 > [ 7566.914] (II) intel(0): EDID (in hex): > [ 7566.914] (II) intel(0): 00ffffffffffff0030ae114000000000 > [ 7566.914] (II) intel(0): 00130103801a1078eaba959759558c27 > [ 7566.914] (II) intel(0): 21505400000001010101010101010101 > [ 7566.914] (II) intel(0): 010101010101121b0080502014301820 > [ 7566.914] (II) intel(0): 440005a31000001f9316008050201430 > [ 7566.914] (II) intel(0): 1820440005a31000001f0000000f0081 > [ 7566.914] (II) intel(0): 0a3c810a3216090030e4f001000000fe > [ 7566.914] (II) intel(0): 004c503132315758332d544c433100ac > [ 7566.914] (II) intel(0): EDID vendor "LEN", prod id 16401 > [ 7566.914] (II) intel(0): Printing DDC gathered Modelines: > [ 7566.914] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 > 1408 800 804 808 820 +hsync +vsync (49.2 kHz) > [ 7566.914] (II) intel(0): Modeline "1280x800"x0.0 57.79 1280 1304 1336 > 1408 800 804 808 820 +hsync +vsync (41.0 kHz) > [ 7566.914] (II) intel(0): Not using default mode "320x240" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "400x300" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "400x300" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "512x384" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "640x480" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "640x512" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "800x600" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "896x672" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "928x696" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "960x720" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "700x525" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Not using default mode "1024x768" (doublescan > mode not supported) > [ 7566.914] (II) intel(0): Printing probed modes for output LVDS1 > [ 7566.914] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1304 1336 > 1408 800 804 808 820 +hsync +vsync (49.2 kHz) > [ 7566.914] (II) intel(0): Modeline "1280x800"x50.1 57.79 1280 1304 1336 > 1408 800 804 808 820 +hsync +vsync (41.0 kHz) > [ 7566.914] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 > 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > [ 7566.914] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 > 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > [ 7566.914] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 > 1024 600 601 603 625 +hsync +vsync (35.2 kHz) > [ 7566.914] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 > 480 490 492 525 -hsync -vsync (31.5 kHz) > [ 7566.914] (II) intel(0): EDID for output VGA1 > [ 7566.924] (II) intel(0): EDID for output HDMI1 > [ 7566.930] (II) intel(0): EDID for output DP1 > [ 7566.930] (II) intel(0): Output LVDS1 connected > [ 7566.930] (II) intel(0): Output VGA1 disconnected > [ 7566.930] (II) intel(0): Output HDMI1 disconnected > [ 7566.930] (II) intel(0): Output DP1 disconnected > [ 7566.930] (II) intel(0): Using exact sizes for initial modes > [ 7566.930] (II) intel(0): Output LVDS1 using initial mode 1280x800 > [ 7566.930] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless > otherwise stated. > [ 7566.930] (II) intel(0): Kernel page flipping support detected, enabling > [ 7566.930] (**) intel(0): Display dimensions: (260, 160) mm > [ 7566.930] (**) intel(0): DPI set to (125, 127) > [ 7566.930] (II) Loading sub module "fb" > [ 7566.930] (II) LoadModule: "fb" > [ 7566.931] (II) Loading /usr/local/lib/xorg/modules/libfb.so > [ 7566.994] (II) Module fb: vendor="X.Org Foundation" > [ 7566.994] compiled for 1.10.6, module version = 1.0.0 > [ 7566.994] ABI class: X.Org ANSI C Emulation, version 0.4 > [ 7566.994] (II) Loading sub module "dri2" > [ 7566.994] (II) LoadModule: "dri2" > [ 7566.995] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so > [ 7566.995] (II) Module dri2: vendor="X.Org Foundation" > [ 7566.995] compiled for 1.10.6, module version = 1.2.0 > [ 7566.995] ABI class: X.Org Server Extension, version 5.0 > [ 7566.995] (==) Depth 24 pixmap format is 32 bpp > [ 7566.995] (II) intel(0): [DRI2] Setup complete > [ 7566.995] (II) intel(0): [DRI2] DRI driver: i965 > [ 7566.995] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, > tiled > [ 7567.098] (II) UXA(0): Driver registered support for the following > operations: > [ 7567.098] (II) solid > [ 7567.098] (II) copy > [ 7567.098] (II) composite (RENDER acceleration) > [ 7567.098] (II) put_image > [ 7567.098] (II) get_image > [ 7567.098] (==) intel(0): Backing store disabled > [ 7567.098] (==) intel(0): Silken mouse enabled > [ 7567.156] (II) intel(0): Initializing HW Cursor > [ 7567.324] (II) intel(0): RandR 1.2 enabled, ignore the following RandR > disabled message. > [ 7567.347] (==) intel(0): DPMS enabled > [ 7567.347] (==) intel(0): Intel XvMC decoder enabled > [ 7567.348] (II) intel(0): Set up textured video > [ 7567.348] (II) intel(0): [XvMC] xvmc_vld driver initialized. > [ 7567.348] (II) intel(0): direct rendering: DRI2 Enabled > [ 7567.348] (--) RandR disabled > [ 7567.348] (II) Initializing built-in extension Generic Event Extension > [ 7567.348] (II) Initializing built-in extension SHAPE > [ 7567.348] (II) Initializing built-in extension MIT-SHM > [ 7567.348] (II) Initializing built-in extension XInputExtension > [ 7567.348] (II) Initializing built-in extension XTEST > [ 7567.348] (II) Initializing built-in extension BIG-REQUESTS > [ 7567.348] (II) Initializing built-in extension SYNC > [ 7567.348] (II) Initializing built-in extension XKEYBOARD > [ 7567.348] (II) Initializing built-in extension XC-MISC > [ 7567.348] (II) Initializing built-in extension XINERAMA > [ 7567.348] (II) Initializing built-in extension XFIXES > [ 7567.348] (II) Initializing built-in extension RENDER > [ 7567.348] (II) Initializing built-in extension RANDR > [ 7567.348] (II) Initializing built-in extension COMPOSITE > [ 7567.348] (II) Initializing built-in extension DAMAGE > [ 7567.626] (II) AIGLX: Loaded and initialized > /usr/local/lib/dri/swrast_dri.so > [ 7567.626] (II) GLX: Initialized DRISWRAST GL provider for screen 0 > [ 7567.627] (II) intel(0): Setting screen physical size to 338 x 211 > [ 7567.796] [dix] Could not init font path element > ${prefix}/share/fonts/X11/misc/, removing from list! > [ 7567.796] [dix] Could not init font path element > ${prefix}/share/fonts/X11/TTF/, removing from list! > [ 7567.796] [dix] Could not init font path element > ${prefix}/share/fonts/X11/OTF/, removing from list! > [ 7567.796] [dix] Could not init font path element > ${prefix}/share/fonts/X11/Type1/, removing from list! > [ 7567.796] [dix] Could not init font path element > ${prefix}/share/fonts/X11/100dpi/, removing from list! > [ 7567.796] [dix] Could not init font path element > ${prefix}/share/fonts/X11/75dpi/, removing from list! > [ 7568.124] (II) Using input driver 'mouse' for 'Mouse0' > [ 7568.124] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so > [ 7568.124] (**) Option "CorePointer" > [ 7568.124] (**) Mouse0: always reports core events > [ 7568.124] (**) Option "Protocol" "auto" > [ 7568.124] (**) Option "Device" "/dev/sysmouse" > [ 7568.124] (**) Mouse0: Protocol: "auto" > [ 7568.124] (**) Mouse0: always reports core events > [ 7568.124] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 > [ 7568.124] (**) Option "ZAxisMapping" "4 5 6 7" > [ 7568.124] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7 > [ 7568.124] (**) Mouse0: Buttons: 11 > [ 7568.124] (II) XINPUT: Adding extended input device "Mouse0" (type: > MOUSE) > [ 7568.124] (**) Mouse0: (accel) keeping acceleration scheme 1 > [ 7568.124] (**) Mouse0: (accel) acceleration profile 0 > [ 7568.124] (**) Mouse0: (accel) acceleration factor: 2.000 > [ 7568.124] (**) Mouse0: (accel) acceleration threshold: 4 > [ 7568.124] (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 > [ 7568.124] (II) Mouse0: SetupAuto: protocol is SysMouse > [ 7568.124] (II) Using input driver 'kbd' for 'Keyboard0' > [ 7568.124] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so > [ 7568.124] (**) Option "CoreKeyboard" > [ 7568.124] (**) Keyboard0: always reports core events > [ 7568.124] (**) Keyboard0: always reports core events > [ 7568.124] (**) Option "Protocol" "standard" > [ 7568.124] (**) Option "XkbRules" "base" > [ 7568.124] (**) Option "XkbModel" "pc105" > [ 7568.124] (**) Option "XkbLayout" "us" > [ 7568.124] (II) XINPUT: Adding extended input device "Keyboard0" (type: > KEYBOARD) > [ 7568.218] (EE) config/hal: couldn't initialise context: unknown error > (null) > [ 12259.213] (II) 3rd Button detected: disabling emulate3Button > > #pciconf -lv > hostb0@pci0:255:0:0: class=0x060000 card=0x219617aa chip=0x2c628086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Core Processor QuickPath Architecture Generic Non-core > Registers' > class = bridge > subclass = HOST-PCI > hostb1@pci0:255:0:1: class=0x060000 card=0x219617aa chip=0x2d018086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Core Processor QuickPath Architecture System Address > Decoder' > class = bridge > subclass = HOST-PCI > hostb2@pci0:255:2:0: class=0x060000 card=0x219617aa chip=0x2d108086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Core Processor QPI Link 0' > class = bridge > subclass = HOST-PCI > hostb3@pci0:255:2:1: class=0x060000 card=0x219617aa chip=0x2d118086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Core Processor QPI Physical 0' > class = bridge > subclass = HOST-PCI > hostb4@pci0:255:2:2: class=0x060000 card=0x219617aa chip=0x2d128086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Core Processor Reserved' > class = bridge > subclass = HOST-PCI > hostb5@pci0:255:2:3: class=0x060000 card=0x219617aa chip=0x2d138086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Core Processor Reserved' > class = bridge > subclass = HOST-PCI > hostb6@pci0:0:0:0: class=0x060000 card=0x219317aa chip=0x00448086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Core Processor DRAM Controller' > class = bridge > subclass = HOST-PCI > vgapci0@pci0:0:2:0: class=0x030000 card=0x215a17aa chip=0x00468086 rev=0x02 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Core Processor Integrated Graphics Controller' > class = display > subclass = VGA > none0@pci0:0:22:0: class=0x078000 card=0x215f17aa chip=0x3b648086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset HECI Controller' > class = simple comms > em0@pci0:0:25:0: class=0x020000 card=0x215317aa chip=0x10ea8086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = '82577LM Gigabit Network Connection' > class = network > subclass = ethernet > ehci0@pci0:0:26:0: class=0x0c0320 card=0x216317aa chip=0x3b3c8086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset USB2 Enhanced Host > Controller' > class = serial bus > subclass = USB > hdac0@pci0:0:27:0: class=0x040300 card=0x215e17aa chip=0x3b568086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset High Definition Audio' > class = multimedia > subclass = HDA > pcib2@pci0:0:28:0: class=0x060400 card=0x216417aa chip=0x3b428086 rev=0x06 > hdr=0x01 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset PCI Express Root Port 1' > class = bridge > subclass = PCI-PCI > pcib3@pci0:0:28:3: class=0x060400 card=0x216417aa chip=0x3b488086 rev=0x06 > hdr=0x01 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset PCI Express Root Port 4' > class = bridge > subclass = PCI-PCI > pcib4@pci0:0:28:4: class=0x060400 card=0x216417aa chip=0x3b4a8086 rev=0x06 > hdr=0x01 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset PCI Express Root Port 5' > class = bridge > subclass = PCI-PCI > ehci1@pci0:0:29:0: class=0x0c0320 card=0x216317aa chip=0x3b348086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset USB2 Enhanced Host > Controller' > class = serial bus > subclass = USB > pcib5@pci0:0:30:0: class=0x060401 card=0x216517aa chip=0x24488086 rev=0xa6 > hdr=0x01 > vendor = 'Intel Corporation' > device = '82801 Mobile PCI Bridge' > class = bridge > subclass = PCI-PCI > isab0@pci0:0:31:0: class=0x060100 card=0x216617aa chip=0x3b078086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Mobile 5 Series Chipset LPC Interface Controller' > class = bridge > subclass = PCI-ISA > ahci0@pci0:0:31:2: class=0x010601 card=0x216817aa chip=0x3b2f8086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset 6 port SATA AHCI Controller' > class = mass storage > subclass = SATA > none1@pci0:0:31:3: class=0x0c0500 card=0x216717aa chip=0x3b308086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset SMBus Controller' > class = serial bus > subclass = SMBus > none2@pci0:0:31:6: class=0x118000 card=0x219017aa chip=0x3b328086 rev=0x06 > hdr=0x00 > vendor = 'Intel Corporation' > device = '5 Series/3400 Series Chipset Thermal Subsystem' > class = dasp > iwn0@pci0:2:0:0: class=0x028000 card=0x13158086 chip=0x00848086 rev=0x00 > hdr=0x00 > vendor = 'Intel Corporation' > device = 'Centrino Wireless-N 1000' > class = network > > > -- > View this message in context: http://freebsd.1045724.n5.nabble.com/Intel-GPU-patch-13-5-for-stable-9-CFT-Xorg-Upgrade-7-5-2-tp5589273p5589273.html > Sent from the freebsd-x11 mailing list archive at Nabble.com. > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4F6C7E09.3030406>