Date: Tue, 31 Jan 2012 22:50:12 GMT From: James Mansion <james@mansionfamily.plus.com> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/164258: [mfi] mfi does not work with PERC5/i in AMD M350 motherboard Message-ID: <201201312250.q0VMoCvd020236@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/164258; it has been noted by GNATS.
From: James Mansion <james@mansionfamily.plus.com>
To: bug-followup@FreeBSD.org, james@mansionfamily.plus.com
Cc:
Subject: Re: kern/164258: [mfi] mfi does not work with PERC5/i in AMD M350
motherboard
Date: Tue, 31 Jan 2012 22:41:07 +0000
Note sure this looks quite as I was expecting. I added:
verbose_loading="YES"
kern.msgbufsize="655360"
in loader.conf. The msgbufsize didn't seem to extend the dmesg output much.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: AMD E-350 Processor (1600.06-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x500f10 Family = 14 Model = 1
Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2$
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD
Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7811166208 (7449 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Warning: Optional field Pm2ControlBlock has zero address or length:
0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0: Changing APIC ID to 0
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 450
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem
0xc0000000-0xcfffffff,0xfeb00000-0xfeb3ffff irq 18 at device 1$
hdac0: <ATI (Unknown) High Definition Audio Controller> mem
0xfeb44000-0xfeb47fff irq 19 at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib1: no PRT entry for 1.0.INTC
mfi0: <Dell PERC 5/i> mem 0xd0000000-0xd000ffff,0xfea00000-0xfea1ffff
irq 96 at device 14.0 on pci2
mfi0: Megaraid SAS driver Ver 3.00
mfi0: 10970 (379716350s/0x0020/info) - Hibernate command received from host
mfi0: 10971 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 10972 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 10973 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 10974 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 10975 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 10976 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 10977 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 10978 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 10979 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 10980 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 10981 (boot + 2s/0x0008/info) - Battery Present
mfi0: 10982 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 10983 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 10984 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 10985 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 10986 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 10987 (379880550s/0x0020/info) - Time established as 01/14/12
18:22:30; (30 seconds since power on)
mfi0: 10988 (379880551s/0x0020/info) - Patrol Read started
mfi0: 10989 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 10990 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 10991 (boot + 2s/0x0008/info) - Battery Present
mfi0: 10992 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 10993 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 10994 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 10995 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 10996 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 10997 (boot + 29s/0x0020/info) - Patrol Read resumed
mfi0: 10998 (379880607s/0x0020/info) - Time established as 01/14/12
18:23:27; (30 seconds since power on)
mfi0: 11001 (379880664s/0x0008/info) - Battery temperature is normal
mfi0: 11002 (379880664s/0x0008/info) - Battery started charging
mfi0: 11003 (379880664s/0x0008/info) - Current capacity of the battery
is above threshold
mfi0: 11006 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 11007 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 11008 (boot + 2s/0x0008/info) - Battery Present
mfi0: 11009 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 11010 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 11011 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 11012 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 11013 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 11014 (boot + 30s/0x0020/info) - Patrol Read resumed
mfi0: 11015 (379880735s/0x0020/info) - Time established as 01/14/12
18:25:35; (30 seconds since power on)
mfi0: 11020 (379880792s/0x0008/info) - Battery temperature is normal
mfi0: 11021 (379880792s/0x0008/info) - Battery started charging
mfi0: 11022 (379880792s/0x0008/info) - Current capacity of the battery
is above threshold
mfi0: 11037 (379881136s/0x0020/info) - Patrol Read complete
mfi0: 11038 (379884237s/0x0008/info) - Battery charge complete
mfi0: 11039 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 11040 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 11041 (boot + 2s/0x0008/info) - Battery Present
mfi0: 11042 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 11043 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 11044 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 11045 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 11046 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 11047 (379930811s/0x0020/info) - Time established as 01/15/12
8:20:11; (30 seconds since power on)
mfi0: 11048 (379930868s/0x0008/info) - Battery temperature is normal
mfi0: 11049 (379930868s/0x0008/info) - Current capacity of the battery
is above threshold
mfi0: 11050 (379930933s/0x0008/info) - Battery started charging
mfi0: 11051 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 11052 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 11053 (boot + 2s/0x0008/info) - Battery Present
mfi0: 11054 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 11055 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 11056 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 11057 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 11058 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 11059 (379930990s/0x0020/info) - Time established as 01/15/12
8:23:10; (30 seconds since power on)
mfi0: 11060 (379931047s/0x0008/info) - Battery temperature is normal
mfi0: 11061 (379931047s/0x0008/info) - Battery started charging
mfi0: 11062 (379931047s/0x0008/info) - Current capacity of the battery
is above threshold
mfi0: 11063 (379932542s/0x0008/info) - Battery charge complete
mfi0: 11064 (380430000s/0x0020/info) - Patrol Read started
mfi0: 11085 (380430484s/0x0020/info) - Patrol Read complete
mfi0: 11086 (381034800s/0x0020/info) - Patrol Read started
mfi0: 11109 (381035284s/0x0020/info) - Patrol Read complete
mfi0: 11110 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 11111 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 11112 (boot + 2s/0x0008/info) - Battery Present
mfi0: 11113 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 11114 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 11115 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 11116 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 11117 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 11118 (381141887s/0x0020/info) - Time established as 01/29/12
8:44:47; (30 seconds since power on)
mfi0: 11119 (381141944s/0x0008/info) - Battery temperature is normal
mfi0: 11120 (381141944s/0x0008/info) - Current capacity of the battery
is above threshold
mfi0: 11121 (381142009s/0x0008/info) - Battery started charging
mfi0: 11122 (381142789s/0x0008/info) - Battery charge complete
mfi0: 11123 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 11124 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 11125 (boot + 2s/0x0008/info) - Battery Present
mfi0: 11126 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 11127 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 11128 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 11129 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 11130 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 11131 (381362831s/0x0020/info) - Time established as 01/31/12
22:07:11; (30 seconds since power on)
mfi0: 11132 (381362888s/0x0008/info) - Battery temperature is normal
mfi0: 11133 (381362888s/0x0008/info) - Battery started charging
mfi0: 11134 (381362888s/0x0008/info) - Current capacity of the battery
is above threshold
mfi0: 11135 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 11136 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 11137 (boot + 2s/0x0008/info) - Battery Present
mfi0: 11138 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 11139 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 11140 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 11141 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 11142 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 11143 (381363278s/0x0020/info) - Time established as 01/31/12
22:14:38; (30 seconds since power on)
mfi0: 11144 (381363335s/0x0008/info) - Battery temperature is normal
mfi0: 11145 (381363335s/0x0008/info) - Battery started charging
mfi0: 11146 (381363335s/0x0008/info) - Current capacity of the battery
is above threshold
mfi0: 11147 (boot + 0s/0x0020/info) - Firmware initialization started
(PCI ID 0015/1028/1f02/1028)
mfi0: 11148 (boot + 0s/0x0020/info) - Firmware version 1.03.40-0232
mfi0: 11149 (boot + 2s/0x0008/info) - Battery Present
mfi0: 11150 (boot + 2s/0x0020/info) - Package version 5.1.1-0050
mfi0: 11151 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0)
mfi0: 11152 (boot + 29s/0x0002/info) - Inserted: PD 00(e0/s0) Info:
enclPd=ffff, scsiType=0, portMap=01, sasAddr=5000c5$
mfi0: 11153 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1)
mfi0: 11154 (boot + 29s/0x0002/info) - Inserted: PD 01(e0/s1) Info:
enclPd=ffff, scsiType=0, portMap=02, sasAddr=5000c5$
mfi0: 11155 (381364073s/0x0020/info) - Time established as 01/31/12
22:27:53; (30 seconds since power on)
mfi0: 11156 (381364130s/0x0008/info) - Battery temperature is normal
mfi0: 11157 (381364130s/0x0008/info) - Battery started charging
mfi0: Cannot allocate interrupt
device_attach: mfi0 attach returned 22
pcib3: <PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib3
ahci0: <ATI IXP700 AHCI SATA controller> port
0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem$
ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xfeb4e000-0xfeb4efff irq 18
at device 18.0 on pci0
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeb4d000-0xfeb4d0ff irq
17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xfeb4c000-0xfeb4cfff irq 18
at device 19.0 on pci0
usbus2: <OHCI (generic) USB controller> on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfeb4b000-0xfeb4b0ff irq
17 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
hdac1: <ATI SB600 High Definition Audio Controller> mem
0xfeb40000-0xfeb43fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib4
ohci2: <OHCI (generic) USB controller> mem 0xfeb4a000-0xfeb4afff irq 18
at device 20.5 on pci0
usbus4: <OHCI (generic) USB controller> on ohci2
pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci5: <ACPI PCI bus> on pcib5
mskc0: <Marvell Yukon 88E8057 Gigabit Ethernet> port 0xe000-0xe0ff mem
0xfe920000-0xfe923fff irq 16 at device 0.0 on pc$
msk0: <Marvell Technology Group Ltd. Yukon Ultra 2 Id 0xba Rev 0x00> on
mskc0
msk0: Ethernet address: dc:9c:52:07:a5:7f
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT$
pcib6: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe800000-0xfe801fff irq
17 at device 0.0 on pci6
xhci0: 32 byte context size.
usbus5 on xhci0
ohci3: <OHCI (generic) USB controller> mem 0xfeb49000-0xfeb49fff irq 18
at device 22.0 on pci0
usbus6: <OHCI (generic) USB controller> on ohci3
ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfeb48000-0xfeb480ff irq
17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci2
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #3: Realtek ALC892
pcm1: <HDA Realtek ALC892 PCM #0 Analog> at cad 3 nid 1 on hdac1
pcm2: <HDA Realtek ALC892 PCM #1 Analog> at cad 3 nid 1 on hdac1
pcm3: <HDA Realtek ALC892 PCM #2 Digital> at cad 3 nid 1 on hdac1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 5.0Gbps Super Speed USB v3.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <0x1033> at usbus5
uhub5: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <ATI> at usbus7
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Corsair Force 3 SSD 1.2> ATA-9 SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <Hitachi HDS5C3020ALA632 ML6OA580> ATA-8 SATA 3.x device
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Hitachi HDS5C3020ALA632 ML6OA580> ATA-8 SATA 3.x device
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <Hitachi HDS5C3020ALA632 ML6OA580> ATA-8 SATA 3.x device
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
ada4: <Hitachi HDS5C3020ALA632 ML6OA580> ATA-8 SATA 3.x device
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad12
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 12500455 Hz quality 800
uhub4: 2 ports with 2 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub0: 5 ports with 5 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub5: 4 ports with 4 removable, self powered
Root mount waiting for: usbus7 usbus3 usbus1
Root mount waiting for: usbus7 usbus3 usbus1
uhub7: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
Trying to mount root from ufs:/dev/ada0p3 [rw]...
ugen2.2: <NOVATEK> at usbus2
ukbd0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on usbus2
kbd2 at ukbd0
uhid0: <NOVATEK USB Keyboard, class 0/0, rev 1.10/1.12, addr 2> on usbus2
ugen0.2: <vendor 0x0cf3> at usbus0
ZFS filesystem version 5
ZFS storage pool version 28
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201201312250.q0VMoCvd020236>