Date: Mon, 17 Jul 2006 17:40:02 +0200 From: Miroslav Lachman <000.fbsd@quip.cz> To: freebsd-stable@freebsd.org Subject: Re: ATA problems again ... Message-ID: <44BBAF52.9080007@quip.cz> In-Reply-To: <6.2.3.4.0.20060716185019.12a29240@64.7.153.2> References: <DAFCD4DC-D2D4-4574-ACBF-367D642D9729@stromnet.org> <8D08DDB6-6AC1-45B6-B2CE-08782F54968A@stromnet.org> <884C01BC-3E97-46EC-AA8B-E70C3931F3A4@stromnet.org> <36895211-2796-4213-B336-6279AB3AC3CB@stromnet.org> <20060713132357.Y61840@fledge.watson.org> <44B7EA39.4060509@quip.cz> <6.2.3.4.0.20060716185019.12a29240@64.7.153.2>
next in thread | previous in thread | raw e-mail | index | archive | help
Mike Tancsa wrote: [..] > Install the smartmontools from > > /usr/ports/sysutils/smartmontools/ > > and post the output of > smartctl -a /dev/ad8 smartmontools was previously installed and running as daemon without any bad reports. I can not run "smartctl -a /dev/ad8" now, because my server housing provider replaced HDD with the new one and after an hour of synchronization "ad8: FAILURE - device detached". So provider replaced whole server, only ad4 is original piece of HW. On new server synchronization was much faster then in previous server (1:30 hour compared to 5 hours in previous server) - so I think it was HW problem. Now I am running stresstest with copying /usr/ports to another partition in infinite loop. I will post results later. (On bad server, test failed after about 30 minutes. On another server the test is running fine second day, so I think if disk will not fail after 1 day, problem is solved) At last - now I think this was not GEOM/gmirror related. I tried remove ad8 provider from gmirror (gm0), boot up system from gm0 with one provider (ad4) and test ad8 mounted separately - ad8 failed again. Miroslav Lachman
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44BBAF52.9080007>