Date: Fri, 30 Sep 2005 09:48:34 -0700 From: Sean Bruno <sbruno@miralink.com> To: freebsd-current@freebsd.org Subject: 4.11 Release Qlogic Driver(isp) Message-ID: <1128098914.25701.92.camel@oscar>
next in thread | raw e-mail | index | archive | help
I have been attempting to get the isp driver to function in target mode. I see in the man page isp(4) that I can pass the option ISP_TARGET_MODE during compile time of the kernel such that it will function as a target mode driver. However, I don't see any indication that the driver is acting in target mode when I boot the system. dmesg output for isp: isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0xd800-0xd8ff mem 0xd7000000-0xd7000fff irq 11 at device 9.0 on pci0 isp0: Ultra Mode Capable isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 7.65.0 isp0: Last F/W revision was 4.53.0 isp0: 124 max I/O commands supported isp0: Initiator ID is 7 on Channel 0 isp0: driver initiated bus reset of bus 0 The next to last line, "Initiator ID is 7 on Channel 0" should have a reference to target mode...I think... I have also added the following 2 entries to /boot/defaults/loader.conf: isp_debug=7 isp_tdebug=5 In addition, I defined ISP_TARGET_MODE in my kernel configuration file like so: options ISP_TARGET_MODE #Support for Qlogic target mode. This causes the contents of opt_isp.h in /usr/src/sys/compile/MYKERNEL/ to have the following entry: #define ISP_TARGET_MODE 1 Which I believe to be correct. opt_isp.h seems to only be included from isp_freebsd.h in /usr/src/sys/dev/isp/ Finally, which is the really strange part, there seems to be no difference in the size of the .o files with or without this define. So I am assuming that I am not compiling the target mode option correctly. Any feedback on this would be greatly appreciated. Sean
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1128098914.25701.92.camel>