Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 15 Sep 2004 12:29:23 +0300
From:      "Andris" <andris@multicom.lv>
To:        <current@freebsd.org>
Subject:   RE: ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611
Message-ID:  <200409150929.i8F9TR3Y066763@gate.multicom.lv>
In-Reply-To: <259306135.20040915091315@wilbury.sk>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi,

The same messages is on my 5.3-BETA4 box.

Andris


Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA4 #6: Tue Sep 14 17:21:45 EEST 2004
    andris@audio.ldz.lv:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2405.47-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf33  Stepping = 3
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 536018944 (511 MB)
avail memory = 514850816 (491 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xfc000000-0xfdffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18
at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16
at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <3Com 3C940 Gigabit Ethernet> port 0xd800-0xd8ff mem
0xfbefc000-0xfbefffff irq 22 at device 5.0 on pci2
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:0c:6e:d7:e5:3a
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
auto
atapci0: <SiI 0680 UDMA133 controller> port
0xdf90-0xdf9f,0xdfa8-0xdfab,0xdfa0-0xdfa7,0xdfac-0xdfaf,0xdfe0-0xdfe7 mem
0xfbefbc00-0xfbefbcff irq 2
1 at device 9.0 on pci2
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <SiI 0680 UDMA133 controller> port
0xdf50-0xdf5f,0xdf80-0xdf83,0xdf68-0xdf6f,0xdf84-0xdf87,0xdf88-0xdf8f mem
0xfbefb800-0xfbefb8ff irq 2
2 at device 10.0 on pci2
ata4: channel #0 on atapci1
ata5: channel #1 on atapci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci2: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci2
ata1: channel #1 on atapci2
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2405466324 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 19092MB <ST320414A/3.28> [38792/16/63] at ata0-master UDMA100
ad4: 286103MB <Maxtor 5A300J0/RAMB1TV0> [581290/16/63] at ata2-master
UDMA133
ad6: 286103MB <Maxtor 5A300J0/RAMB1TV0> [581290/16/63] at ata3-master
UDMA133
ad8: 286103MB <Maxtor 5A300J0/RAMB1TV0> [581290/16/63] at ata4-master
UDMA133
ad10: 286103MB <Maxtor 5A300J0/RAMB1TV0> [581290/16/63] at ata5-master
UDMA133
Mounting root from ufs:/dev/ad0s1a
ad4: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=63
ad4: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=63
ad4: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=63

--> -----Original Message-----
--> From: owner-freebsd-current@freebsd.org [mailto:owner-freebsd-
--> current@freebsd.org] On Behalf Of DanGer
--> Sent: Wednesday, September 15, 2004 10:13 AM
--> To: current@freebsd.org
--> Subject: Re: ad0: TIMEOUT - READ_DMA retrying (2 retries left)
--> LBA=207594611
--> 
--> Hello FUJITA,
--> 
--> Tuesday, September 14, 2004, 7:14:27 PM, you wrote:
--> 
--> > Hi,
--> 
--> > My 6.0-CURRENT box says, such as
--> 
--> > ad0: TIMEOUT - READ_DMA retrying (2 retries left) LBA=207594611
--> > ad0: WARNING - READ_DMA no interrupt but good status
--> 
--> > I replaced the ad0 with brand-new HDD, but I still got same messages.
--> 
--> > The box has 3 HDDs(ad0,ad1,ad3) and DVD(acd0) drive, but the messages
--> > comes only from ad0.
--> 
--> > What is happening?
--> > Cable problem or ATA controller problem?
--> 
--> I'm getting this errors too on 5.2.1, so I don't know what's going on.
--> The HDD is about 3 a 2 months old and not under big load.
--> And my box uses to freeze because of these errors...
--> 
--> here is my dmesg:
--> 
--> Copyright (c) 1992-2004 The FreeBSD Project.
--> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
-->         The Regents of the University of California. All rights
--> reserved.
--> FreeBSD 5.2.1-RELEASE-p9 #0: Thu Aug  5 09:31:46 CEST 2004
-->     danger@daemon.rulez.sk:/usr/obj/usr/src/sys/daemon
--> Preloaded elf kernel "/boot/kernel/kernel" at 0xc07aa000.
--> Timecounter "i8254" frequency 1193182 Hz quality 0
--> CPU: Intel(R) Celeron(TM) CPU                1100MHz (1116.83-MHz 686-
--> class CPU)
-->   Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
--> 
--> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C
--> MOV,PAT,PSE36,MMX,FXSR,SSE>
--> real memory  = 402587648 (383 MB)
--> avail memory = 384618496 (366 MB)
--> Pentium Pro MTRR support enabled
--> acpi0: <IntelR AWRDACPI> on motherboard
--> pcibios: BIOS version 2.10
--> Using $PIR table, 12 entries at 0xc00fd950
--> acpi0: Power Button (fixed)
--> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
--> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
--> acpi_cpu0: <CPU> on acpi0
--> acpi_tz0: <Thermal Zone> on acpi0
--> acpi_button0: <Power Button> on acpi0
--> acpi_button1: <Sleep Button> on acpi0
--> pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0xcf8-0xcff on acpi0
--> pci0: <ACPI PCI bus> on pcib0
--> pcib0: slot 31 INTD is routed to irq 11
--> pcib0: slot 31 INTC is routed to irq 9
--> pcib0: slot 31 INTB is routed to irq 5
--> agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xd0000000-
--> 0xd3ffffff at device 0.0 on pci0
--> pcib1: <PCI-PCI bridge> at device 1.0 on pci0
--> pci1: <PCI bus> on pcib1
--> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
--> pci2: <ACPI PCI bus> on pcib2
--> pcib2: slot 0 INTA is routed to irq 12
--> pcib2: slot 2 INTA is routed to irq 5
--> pcib2: slot 6 INTA is routed to irq 11
--> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x9000-0x907f mem
--> 0xd9000000-0xd900007f irq 12 at device 0.0 on pci2
--> xl0: Ethernet address: 00:04:76:14:be:1d
--> miibus0: <MII bus> on xl0
--> xlphy0: <3c905C 10/100 internal PHY> on miibus0
--> xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
--> pci2: <display, VGA> at device 2.0 (no driver attached)
--> atapci0: <HighPoint HPT370 UDMA100 controller> port 0xa400-
--> 0xa4ff,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 11 at
--> device 6.0 on pci2
--> atapci0: [MPSAFE]
--> ata2: at 0x9400 on atapci0
--> ata2: [MPSAFE]
--> ata3: at 0x9c00 on atapci0
--> ata3: [MPSAFE]
--> isab0: <PCI-ISA bridge> at device 31.0 on pci0
--> isa0: <ISA bus> on isab0
--> atapci1: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f at device
--> 31.1 on pci0
--> ata0: at 0x1f0 irq 14 on atapci1
--> ata0: [MPSAFE]
--> ata1: at 0x170 irq 15 on atapci1
--> ata1: [MPSAFE]
--> pci0: <serial bus, USB> at device 31.2 (no driver attached)
--> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
--> pci0: <serial bus, USB> at device 31.4 (no driver attached)
--> pci0: <multimedia, audio> at device 31.5 (no driver attached)
--> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
--> 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
--> fdc0: FIFO enabled, 8 bytes threshold
--> sio0 port 0x3f8-0x3ff irq 4 on acpi0
--> sio0: type 16550A
--> sio1 port 0x2f8-0x2ff irq 3 on acpi0
--> sio1: type 16550A
--> npx0: [FAST]
--> npx0: <math processor> on motherboard
--> npx0: INT 16 interface
--> orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0
--> pmtimer0 on isa0
--> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
--> sc0: <System console> at flags 0x100 on isa0
--> sc0: VGA <16 virtual consoles, flags=0x300>
--> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
--> isa0
--> Timecounter "TSC" frequency 1116829062 Hz quality 800
--> Timecounters tick every 10.000 msec
--> ipfw2 initialized, divert disabled, rule-based forwarding enabled,
--> default to accept, logging disabled
--> IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
--> acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
--> ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
--> GEOM: create disk ad0 dp=0xc3b11e60
--> ad0: 194481MB <Maxtor 6Y200P0> [395136/16/63] at ata0-master UDMA33
--> acd0: CDROM <SAMSUNG CD-ROM SC-148C> at ata0-slave PIO4
--> Mounting root from ufs:/dev/ad0s1a
--> WARNING: /data was not properly dismounted
--> WARNING: /tmp was not properly dismounted
--> WARNING: /usr was not properly dismounted
--> WARNING: /var was not properly dismounted
--> Accounting enabled
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=161995103
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3609119
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3610303
--> ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064831
--> ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064831
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3941919
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942047
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942751
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3942751
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3943263
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3943263
--> ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
--> error=84<ICRC,ABORTED> LBA=3943263
--> ad0: WARNING - WRITE_DMA UDMA ICRC error (retrying request) LBA=21064383
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767239
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767063
--> ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=3767063
--> ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR>
--> error=84<ICRC,ABORTED> LBA=3767063
--> spec_getpages:(ad0s1e) I/O read failure: (error=5) bp 0xcb6d98c8 vp
--> 0xc3c0c514
-->                size: 65536, resid: 65536, a_count: 65536, valid: 0x0
-->                nread: 0, reqpage: 7, pindex: 142, pcount: 16
--> 
--> 
--> --
--> Best regards
--> 
--> +----------==/\/\==----------+
--> | DanGer <danger@wilbury.sk> |
--> | DanGer@IRCnet ICQ261701668 |
--> | http://danger.homeunix.org |
--> +----------==\/\/==----------+
--> 
--> _______________________________________________
--> freebsd-current@freebsd.org mailing list
--> http://lists.freebsd.org/mailman/listinfo/freebsd-current
--> To unsubscribe, send any mail to "freebsd-current-
--> unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200409150929.i8F9TR3Y066763>