Date: Fri, 13 Feb 2004 20:15:30 -0800 (PST) From: Jamie Bowden <ragnar@sysabend.org> To: Mathew Kanner <mat@cnd.mcgill.ca> Cc: multimedia@freebsd.org Subject: Re: Creative SB Audigy Message-ID: <20040213194703.U913-100000@moo.sysabend.org> In-Reply-To: <20040214011925.GG50294@cnd.mcgill.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 13 Feb 2004, Mathew Kanner wrote:
> On Feb 13, Jamie Bowden wrote:
> > I've installed the Audigy module from the patches at:
> I believe that current has audigy drivers included. I don't have
> the hardware to test them, so it would be helpful if you could you drop
> the patches and cvsup to the latest and test them? (Nice to see that
> midi worked :) ).
Okay, I'm up and running the following now:
10:47pm yakko /home/jamie %uname -a
FreeBSD yakko 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Fri Feb 13 22:23:27 EST
2004 jamie@yakko:/usr/obj/usr/src/sys/yakko i386
Here's sndstat:
10:48pm yakko /home/jamie %cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Creative Audigy (EMU10K2)> at io 0xa400 irq 22 (8p/2r/0v channels
duplex default)
pcm1: <Intel ICH5 (82801EB)> at io 0xec102000, 0xec103000 irq 17 bufsz
16384 (1p/1r/0v channels duplex)
Here's the dmesg:
10:48pm yakko /home/jamie %dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Fri Feb 13 22:23:27 EST 2004
jamie@yakko:/usr/obj/usr/src/sys/yakko
Preloaded elf kernel "/boot/kernel/kernel" at 0xc085c000.
ACPI APIC Table: <IntelR AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3006.83-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 2147418112 (2047 MB)
avail memory = 2095988736 (1998 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
acpi0: <IntelR AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 12 entries at 0xc00fde20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xc0000000-0xcfffffff at
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq
16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: Microsoft SideWinder Force Feedback 2 Joystick, rev 1.10/a.00, addr
3
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq
19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen1: Logitech Logitech MOMO Racing, rev 1.10/0.19, addr 2
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq
18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq
16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xec101000-0xec1013ff irq
23 at device 29.7 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
fwohci0: <Texas Instruments TSB43AB23> mem
0xeb100000-0xeb103fff,0xeb109000-0xeb1097ff irq 18 at device 2.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:50:8d:00:00:fa:0f:a7
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:50:8d:fa:0f:a7
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fxp0: <Intel 82558 Pro/100 Ethernet> port 0xa000-0xa01f mem
0xeb000000-0xeb0fffff,0xec000000-0xec000fff irq 20 at device 4.0 on pci2
fxp0: Ethernet address 00:a0:c9:e1:6d:b0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative Audigy (EMU10K2)> port 0xa400-0xa41f irq 22 at device 6.0
on pci2
pcm0: <TriTech TR28602 AC97 Codec>
fwohci1: vendor=1102, dev=4001
fwohci1: <1394 Open Host Controller Interface> mem
0xeb104000-0xeb107fff,0xeb108000-0xeb1087ff irq 23 at device 6.2 on pci2
fwohci1: OHCI version 1.10 (ROM=0)
fwohci1: No. of Isochronous channel is 4.
fwohci1: EUI64 00:02:3c:00:21:04:db:0a
fwohci1: Phy 1394a available S400, 2 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:02:3c:04:db:0a
sbp1: <SBP-2/SCSI over FireWire> on firewire1
fwohci1: Initiate bus reset
fwohci1: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
firewire1: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire1: bus manager 1 (me)
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xac00-0xacff mem
0xeb10a000-0xeb10afff irq 23 at device 7.0 on pci2
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
bktr0: <BrookTree 878> mem 0xec001000-0xec001fff irq 17 at device 9.0 on
pci2
bktr0: Detected a MSP3451G-A2 at 0x80
bktr0: Pinnacle/Miro TV, Temic NTSC tuner, msp3400c stereo.
pci2: <multimedia> at device 9.1 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port
0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq
18 at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0xc000 on atapci1
ata2: [MPSAFE]
ata3: at 0xc800 on atapci1
ata3: [MPSAFE]
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x500-0x51f irq 17
at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
pcm1: <Intel ICH5 (82801EB)> port 0xdc00-0xdc3f,0xd800-0xd8ff mem
0xec103000-0xec1030ff,0xec102000-0xec1021ff irq 17 at device 31.5 on pci0
pcm1: <Avance Logic ALC650 AC97 Codec>
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
ad0: 19092MB <WDC WD200BB-00AUA1> [38792/16/63] at ata0-master UDMA100
ad1: 28629MB <WDC WD300BB-00AUA1> [58168/16/63] at ata0-slave UDMA100
afd0: REMOVABLE <LS-120 VER5 00 UHD Floppy> at ata1-master WDMA1
acd0: DVDR <PIONEER DVD-RW DVR-105> at ata1-slave UDMA33
ad4: 78167MB <Maxtor 6Y080M0> [158816/16/63] at ata2-master UDMA100
Waiting 15 seconds for SCSI devices to settle
ums0: at uhub0 port 1 (addr 2) disconnected
ums0: detached
ugen1: at uhub1 port 1 (addr 2) disconnected
ugen1: detached
uhid0: Logitech Logitech MOMO Racing, rev 1.10/0.19, addr 2, iclass 3/0
ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ugen0: at uhub0 port 2 (addr 3) disconnected
ugen0: detached
uhid1: Microsoft SideWinder Force Feedback 2 Joystick, rev 1.10/a.00, addr
3, iclass 3/0
SMP: AP CPU #1 Launched!
da0 at ata1 bus 0 target 0 lun 0
da0: <MATSHITA LS-120 VER5 00 F523> Removable Direct Access SCSI-0
device
da0: 3.300MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
(da0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:ata1:0:0:0): CAM Status: SCSI Status Error
(da0:ata1:0:0:0): SCSI Status: Check Condition
(da0:ata1:0:0:0): NOT READY asc:3a,0
(da0:ata1:0:0:0): Medium not present
(da0:ata1:0:0:0): Unretryable error
Opened disk da0 -> 6
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <PLEXTOR CD-ROM PX-40TS 1.13> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
cd1 at ahc0 bus 0 target 6 lun 0
cd1: <PLEXTOR CD-R PX-R820T 1.08> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
cd2 at ata1 bus 0 target 1 lun 0
cd2: <PIONEER DVD-RW DVR-105 1.33> Removable CD-ROM SCSI-0 device
cd2: 33.000MB/s transfers
cd2: Attempt to query device size failed: NOT READY, Medium not present
(da0:ata1:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:ata1:0:0:0): CAM Status: SCSI Status Error
(da0:ata1:0:0:0): SCSI Status: Check Condition
(da0:ata1:0:0:0): NOT READY asc:3a,0
(da0:ata1:0:0:0): Medium not present
(da0:ata1:0:0:0): Unretryable error
Opened disk da0 -> 6
Mounting root from ufs:/dev/ad4s2a
You'll note the lack of midi devices there. I do have the midi and seq
devices in my kernel config. The good news is, it works. I have sound,
xmmix can adjust volume, xmcd can play CDs, and mplayer can play DVDs (and
I've even got sound coming out of all 4 speakers, so surround is working
out of the box). Life is good. I guess I'll migrate the laptop from
RELENG_5_2 to HEAD as well, although for it I'll need the libmap.conf, as
it's got an Nvidia graphics board in it.
I'll paste my config file and pciconf just in case:
10:53pm yakko /home/jamie %cat /usr/src/sys/i386/conf/yakko
machine i386
cpu I686_CPU #aka Pentium Pro(tm)
ident yakko
options INCLUDE_CONFIG_FILE #Include this file in kernel
options SCHED_4BSD
options ADAPTIVE_MUTEXES
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options IPSEC #IP security
options IPSEC_ESP #IP security (crypto; define w/ IPSEC)
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV #install a CDEV entry in /dev
options SMP #Symmetric MultiProcessor Kernel
device apic # I/O APIC
device isa
device pci
device ata
device atadisk #ATA disk drives
device atapicd #ATAPI CDROM drives
device atapifd #ATAPI floppy drives
device atapist #ATAPI tape drives
device atapicam #emulate ATAPI devices as SCSI ditto via CAM
options ATA_STATIC_ID #Static device numbering
device ahc #AHA2940 and onboard AIC7xxx devices
options AHC_ALLOW_MEMIO
device scbus #SCSI bus (required)
device ch #SCSI media changers
device da #Direct Access (disks)
device sa #Sequential Access (tape etc)
device cd #CD
device pass #Passthrough device (direct SCSI access)
device ses #SCSI Environmental Services (and SAF-TE)
device atkbdc #AT keyboard controller
device atkbd #AT keyboard
device psm #PS/2 mouse
device vga #VGA video card driver
device splash #Splash screen and screen saver support
device sc
device agp #support several AGP chipsets
device npx
device acpi
device apm
device sio #8250, 16[45]50 based serial ports
device ppc
device ppbus #Parallel port bus (required)
device lpt #Printer
device plip #TCP/IP over parallel
device ppi #Parallel port interface device
device vpo #Requires scbus and da
device miibus #MII bus support
device fxp #Intel EtherExpress PRO/100B (82557, 82558)
device xl #3Com 3c90x (``Boomerang'', ``Cyclone'')
device bge #Broadcom BCM570xx Gigabit Ethernet
device pcm
device midi
device seq
device joy
device bktr
options OVERRIDE_TUNER=1
options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
device smbus #Bus support, required for smb below.
device ichsmb
device iicbus
device iicbb
device iicsmb
device random #Entropy device
device loop #Network loopback
device ether #Ethernet support
device ppp #Kernel PPP
options PPP_BSDCOMP #PPP BSD-compress support
options PPP_DEFLATE #PPP zlib/deflate/gzip support
device tun #Packet tunnel.
device pty #Pseudo-ttys (telnet etc)
device gif #IPv6 and IPv4 tunneling
device faith #IPv6-to-IPv4 relaying (translation)
device stf #6to4 IPv6 over IPv4 encapsulation
device bpf #Berkeley packet filter
device cbb #Cardbus (yenta) bridge
device pccard #PC Card (16-bit) bus
device cardbus #CardBus (32-bit) bus
#device pcic #ISA attachment currently busted
device uhci #UHCI PCI->USB interface
device ohci #OHCI PCI->USB interface
device ehci
device usb #USB Bus (required)
device ugen #Generic
device uhid #"Human Interface Devices"
device ukbd #Keyboard
device ulpt #Printer
device umass #Disks/Mass storage - Requires scbus and da
device ums #Mouse
device urio #Diamond Rio 500 MP3 player
device uscanner #Scanners
device firewire #FireWire bus code
device sbp #SCSI over FireWire (Requires scbus and da)
device fwe #Ethernet over FireWire (non-standard!)
And here's pciconf -lv:
11:01pm yakko /home/jamie %runas pciconf -lv
agp0@pci0:0:0: class=0x060000 card=0x1022147b chip=0x25788086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82875P Memory Controller Hub'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x25798086 rev=0x02
hdr=0x01
vendor = 'Intel Corporation'
device = '82875P Processor to AGP Controller'
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0x1022147b chip=0x24d28086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1'
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x1022147b chip=0x24d48086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2'
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x1022147b chip=0x24d78086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3'
class = serial bus
subclass = USB
uhci3@pci0:29:3: class=0x0c0300 card=0x1022147b chip=0x24de8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4'
class = serial bus
subclass = USB
ehci0@pci0:29:7: class=0x0c0320 card=0x1022147b chip=0x24dd8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH4/ICH5R) USB EHCI Controller'
class = serial bus
subclass = USB
pcib2@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0xc2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BA/CA/DB/EB/ER (ICH2/3/4/5/5R) Hub Interface to PCI
Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:1: class=0x01018a card=0x1022147b chip=0x24db8086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) EIDE Controller'
class = mass storage
subclass = ATA
atapci1@pci0:31:2: class=0x01018f card=0x1022147b chip=0x24d18086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB (ICH5) SATA Controller'
class = mass storage
subclass = ATA
ichsmb0@pci0:31:3: class=0x0c0500 card=0x1022147b chip=0x24d38086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) SMBus Controller'
class = serial bus
subclass = SMBus
pcm1@pci0:31:5: class=0x040100 card=0x1022147b chip=0x24d58086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = '82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller'
class = multimedia
subclass = audio
none0@pci1:0:0: class=0x030000 card=0x00021002 chip=0x4e481002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies'
device = 'Radeon 9800 Pro'
class = display
subclass = VGA
none1@pci1:0:1: class=0x038000 card=0x00031002 chip=0x4e681002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies'
device = 'Radeon 9800 Pro - Secondary'
class = display
fwohci0@pci2:2:0: class=0x0c0010 card=0x1022147b chip=0x8024104c
rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'TSB43AB23 1394a-2000 OHCI PHY/link-layer Controller'
class = serial bus
subclass = FireWire
fxp0@pci2:4:0: class=0x020000 card=0x00098086 chip=0x12298086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
pcm0@pci2:6:0: class=0x040100 card=0x00511102 chip=0x00041102 rev=0x03
hdr=0x00
vendor = 'Creative Labs'
device = 'EMU10K2 Audio Chipset (SB Audigy Series)'
class = multimedia
subclass = audio
emujoy0@pci2:6:1: class=0x098000 card=0x00401102 chip=0x70031102
rev=0x03 hdr=0x00
vendor = 'Creative Labs'
device = 'EMU10K2 Audigy Gameport'
class = input device
fwohci1@pci2:6:2: class=0x0c0010 card=0x00101102 chip=0x40011102
rev=0x00 hdr=0x00
vendor = 'Creative Labs'
device = 'EMU10K2 Audigy IEEE1394 Firewire Controller'
class = serial bus
subclass = FireWire
ahc0@pci2:7:0: class=0x010000 card=0x78819004 chip=0x81789004 rev=0x01
hdr=0x00
vendor = 'Adaptec Inc'
device = 'AHA-2940U/UW/2940D Ultra/Ultra Wide/Dual SCSI Host
Adapter'
class = mass storage
subclass = SCSI
bktr0@pci2:9:0: class=0x040000 card=0x1200bd11 chip=0x036e109e rev=0x11
hdr=0x00
vendor = 'Brooktree Corporation'
device = 'Bt878 MediaStream Controller'
class = multimedia
subclass = video
none2@pci2:9:1: class=0x048000 card=0x1200bd11 chip=0x0878109e rev=0x11
hdr=0x00
vendor = 'Brooktree Corporation'
device = 'Bt878/Fusion878A Video Capture (Audio Section)'
class = multimedia
Jamie Bowden
--
"It was half way to Rivendell when the drugs began to take hold"
Hunter S Tolkien "Fear and Loathing in Barad Dur"
Iain Bowen <alaric@alaric.org.uk>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040213194703.U913-100000>