Date: Wed, 10 Jul 2013 17:42:20 +0000 (UTC) From: Marcel Moolenaar <marcel@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r253161 - head/sys/dev/uart Message-ID: <201307101742.r6AHgKOm024113@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: marcel Date: Wed Jul 10 17:42:20 2013 New Revision: 253161 URL: http://svnweb.freebsd.org/changeset/base/253161 Log: Protect against broken hardware. In this particular case, protect against H/W not de-asserting the interrupt at all. On x86, and because of the following conditions, this results in a hard hang with interrupts disabled: 1. The uart(4) driver uses a spin lock to protect against concurrent access to the H/W. Spin locks disable and restore interrupts. 2. Restoring the interrupt on x86 always writes the flags register. Even if we're restoring the interrupt from disabled to disabled. 3. The x86 CPU has a short window in which interrupts are enabled when the flags register is written. 4. The uart(4) driver registers a fast interrupt by default. To catch this case, we first try to clear any pending H/W interrupts and in particular, before setting up the interrupt. This makes sure the interrupt is masked on the PIC. The interrupt handler now has a limit set on the number of iterations it'll go through to clear interrupt conditions. If the limit is hit, the handler will return FILTER_SCHEDULE_THREAD. The attach function will check for this return code and avoid setting up the interrupt and foce polling in that case. Obtained from: Juniper Networks, Inc. Modified: head/sys/dev/uart/uart_core.c Modified: head/sys/dev/uart/uart_core.c ============================================================================== --- head/sys/dev/uart/uart_core.c Wed Jul 10 17:16:10 2013 (r253160) +++ head/sys/dev/uart/uart_core.c Wed Jul 10 17:42:20 2013 (r253161) @@ -248,10 +248,14 @@ static int uart_intr(void *arg) { struct uart_softc *sc = arg; - int flag = 0, ipend; + int cnt, ipend; - while (!sc->sc_leaving && (ipend = UART_IPEND(sc)) != 0) { - flag = 1; + if (sc->sc_leaving) + return (FILTER_STRAY); + + cnt = 0; + while (cnt < 20 && (ipend = UART_IPEND(sc)) != 0) { + cnt++; if (ipend & SER_INT_OVERRUN) uart_intr_overrun(sc); if (ipend & SER_INT_BREAK) @@ -269,7 +273,8 @@ uart_intr(void *arg) (timeout_t *)uart_intr, sc); } - return((flag)?FILTER_HANDLED:FILTER_STRAY); + return ((cnt == 0) ? FILTER_STRAY : + ((cnt == 20) ? FILTER_SCHEDULE_THREAD : FILTER_HANDLED)); } serdev_intr_t * @@ -390,7 +395,7 @@ uart_bus_attach(device_t dev) { struct uart_softc *sc, *sc0; const char *sep; - int error; + int error, filt; /* * The sc_class field defines the type of UART we're going to work @@ -430,33 +435,6 @@ uart_bus_attach(device_t dev) sc->sc_bas.bsh = rman_get_bushandle(sc->sc_rres); sc->sc_bas.bst = rman_get_bustag(sc->sc_rres); - sc->sc_irid = 0; - sc->sc_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->sc_irid, - RF_ACTIVE | RF_SHAREABLE); - if (sc->sc_ires != NULL) { - error = bus_setup_intr(dev, - sc->sc_ires, INTR_TYPE_TTY, - uart_intr, NULL, sc, &sc->sc_icookie); - if (error) - error = bus_setup_intr(dev, - sc->sc_ires, INTR_TYPE_TTY | INTR_MPSAFE, - NULL, (driver_intr_t *)uart_intr, sc, &sc->sc_icookie); - else - sc->sc_fastintr = 1; - - if (error) { - device_printf(dev, "could not activate interrupt\n"); - bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irid, - sc->sc_ires); - sc->sc_ires = NULL; - } - } - if (sc->sc_ires == NULL) { - /* No interrupt resource. Force polled mode. */ - sc->sc_polled = 1; - callout_init(&sc->sc_timer, 1); - } - /* * Ensure there is room for at least three full FIFOs of data in the * receive buffer (handles the case of low-level drivers with huge @@ -487,20 +465,6 @@ uart_bus_attach(device_t dev) printf("\n"); } - if (bootverbose && (sc->sc_fastintr || sc->sc_polled)) { - sep = ""; - device_print_prettyname(dev); - if (sc->sc_fastintr) { - printf("%sfast interrupt", sep); - sep = ", "; - } - if (sc->sc_polled) { - printf("%spolled mode", sep); - sep = ", "; - } - printf("\n"); - } - if (sc->sc_sysdev != NULL) { if (sc->sc_sysdev->baudrate == 0) { if (UART_IOCTL(sc, UART_IOCTL_BAUD, @@ -529,6 +493,56 @@ uart_bus_attach(device_t dev) sc->sc_pps.ppscap = PPS_CAPTUREBOTH; pps_init(&sc->sc_pps); + sc->sc_leaving = 0; + filt = uart_intr(sc); + + /* + * Don't use interrupts if we couldn't clear any pending interrupt + * conditions. We may have broken H/W and polling is probably the + * safest thing to do. + */ + if (filt != FILTER_SCHEDULE_THREAD) { + sc->sc_irid = 0; + sc->sc_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, + &sc->sc_irid, RF_ACTIVE | RF_SHAREABLE); + } + if (sc->sc_ires != NULL) { + error = bus_setup_intr(dev, sc->sc_ires, INTR_TYPE_TTY, + uart_intr, NULL, sc, &sc->sc_icookie); + sc->sc_fastintr = (error == 0) ? 1 : 0; + + if (!sc->sc_fastintr) + error = bus_setup_intr(dev, sc->sc_ires, + INTR_TYPE_TTY | INTR_MPSAFE, NULL, + (driver_intr_t *)uart_intr, sc, &sc->sc_icookie); + + if (error) { + device_printf(dev, "could not activate interrupt\n"); + bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irid, + sc->sc_ires); + sc->sc_ires = NULL; + } + } + if (sc->sc_ires == NULL) { + /* No interrupt resource. Force polled mode. */ + sc->sc_polled = 1; + callout_init(&sc->sc_timer, 1); + } + + if (bootverbose && (sc->sc_fastintr || sc->sc_polled)) { + sep = ""; + device_print_prettyname(dev); + if (sc->sc_fastintr) { + printf("%sfast interrupt", sep); + sep = ", "; + } + if (sc->sc_polled) { + printf("%spolled mode", sep); + sep = ", "; + } + printf("\n"); + } + error = (sc->sc_sysdev != NULL && sc->sc_sysdev->attach != NULL) ? (*sc->sc_sysdev->attach)(sc) : uart_tty_attach(sc); if (error) @@ -537,8 +551,6 @@ uart_bus_attach(device_t dev) if (sc->sc_sysdev != NULL) sc->sc_sysdev->hwmtx = sc->sc_hwmtx; - sc->sc_leaving = 0; - uart_intr(sc); return (0); fail:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201307101742.r6AHgKOm024113>