Date: Fri, 21 Jul 2017 20:25:57 +0200 From: Stefan Bethke <stb@lassitu.de> To: freebsd-stable <freebsd-stable@freebsd.org> Subject: Re: Trouble with SM961 in SuperMicro X11 Message-ID: <7C88AB94-17EB-4C66-832F-30D67C064F47@lassitu.de> In-Reply-To: <EF0744E7-41B8-4C1A-9716-6E4718FB6D96@lassitu.de> References: <EF0744E7-41B8-4C1A-9716-6E4718FB6D96@lassitu.de>
next in thread | previous in thread | raw e-mail | index | archive | help
It=E2=80=99s an SM961, not PM951. > Am 21.07.2017 um 20:24 schrieb Stefan Bethke <stb@lassitu.de>: >=20 > I have a fresh SuperMicro SYS-5019S-M and I=E2=80=99ve installed a = Samsung SM961 128GBB, which I want to use as a ZFS cache. >=20 > After installing 11.1-RC3, I=E2=80=99m getting the below errors during = boot, and trying to read or write to it produces the same message. >=20 > Is there a tunable to make this work? A quick test with Windows did = not show any issues. >=20 >=20 > Stefan >=20 > --=20 > Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811 >=20 >=20 >=20 > Copyright (c) 1992-2017 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.1-RC3 #0 r320976: Fri Jul 14 02:20:44 UTC 2017 > root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 > FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on = LLVM 4.0.0) > VT(vga): resolution 640x480 > CPU: Intel(R) Xeon(R) CPU E3-1240 v6 @ 3.70GHz (3696.16-MHz K8-class = CPU) > Origin=3D"GenuineIntel" Id=3D0x906e9 Family=3D0x6 Model=3D0x9e = Stepping=3D9 > = Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > = Features2=3D0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SS= SE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,= AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> > AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> > AMD Features2=3D0x121<LAHF,ABM,Prefetch> > Structured Extended = Features=3D0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVP= CID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> > XSAVE Features=3D0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID > TSC: P-state invariant, performance statistics > real memory =3D 68719476736 (65536 MB) > avail memory =3D 66668195840 (63579 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: < > > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads > random: unblocking device. > ioapic0 <Version 2.0> irqs 0-23 on motherboard > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #4 Launched! > SMP: AP CPU #5 Launched! > SMP: AP CPU #6 Launched! > SMP: AP CPU #7 Launched! > Timecounter "TSC-low" frequency 1848080854 Hz quality 1000 > random: entropy device external interface > kbd1 at kbdmux0 > netmap: loaded module > module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19 > random: registering fast source Intel Secure Key RNG > random: fast provider: "Intel Secure Key RNG" > nexus0 > vtvga0: <VT VGA driver> on motherboard > cryptosoft0: <software crypto> on motherboard > acpi0: <SUPERM SUPERM> on motherboard > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > cpu4: <ACPI CPU> on acpi0 > cpu5: <ACPI CPU> on acpi0 > cpu6: <ACPI CPU> on acpi0 > cpu7: <ACPI CPU> on acpi0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on = acpi0 > Timecounter "HPET" frequency 24000000 Hz quality 950 > Event timer "HPET" frequency 24000000 Hz quality 550 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <old, non-VGA display device> at device 19.0 (no driver = attached) > xhci0: <Intel Sunrise Point USB 3.0 controller> mem = 0xdf400000-0xdf40ffff irq 16 at device 20.0 on pci0 > xhci0: 32 bytes context size, 64-bit DMA > usbus0 on xhci0 > usbus0: 5.0Gbps Super Speed USB v3.0 > pci0: <simple comms> at device 22.0 (no driver attached) > pci0: <simple comms> at device 22.1 (no driver attached) > ahci0: <Intel Sunrise Point AHCI SATA controller> port = 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem = 0xdf410000-0xdf411fff,0xdf41e000-0xdf41e0ff,0xdf41d000-0xdf41d7ff irq 16 = at device 23.0 on pci0 > ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich3: <AHCI channel> at channel 3 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > ahcich6: <AHCI channel> at channel 6 on ahci0 > ahcich7: <AHCI channel> at channel 7 on ahci0 > ahciem0: <AHCI enclosure management bridge> on ahci0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port = 0xe000-0xe01f mem 0xdf300000-0xdf37ffff,0xdf380000-0xdf383fff irq 16 at = device 0.0 on pci1 > igb0: Using MSIX interrupts with 5 vectors > igb0: Ethernet address: ac:1f:6b:18:06:6e > igb0: Bound queue 0 to cpu 0 > igb0: Bound queue 1 to cpu 1 > igb0: Bound queue 2 to cpu 2 > igb0: Bound queue 3 to cpu 3 > igb0: netmap queues/slots: TX 4/1024, RX 4/1024 > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 > pci2: <ACPI PCI bus> on pcib2 > igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port = 0xd000-0xd01f mem 0xdf200000-0xdf27ffff,0xdf280000-0xdf283fff irq 17 at = device 0.0 on pci2 > igb1: Using MSIX interrupts with 5 vectors > igb1: Ethernet address: ac:1f:6b:18:06:6f > igb1: Bound queue 0 to cpu 4 > igb1: Bound queue 1 to cpu 5 > igb1: Bound queue 2 to cpu 6 > igb1: Bound queue 3 to cpu 7 > igb1: netmap queues/slots: TX 4/1024, RX 4/1024 > pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci3: <ACPI PCI bus> on pcib3 > nvme0: <Generic NVMe Device> mem 0xdf100000-0xdf103fff irq 16 at = device 0.0 on pci3 > pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0 > pci4: <ACPI PCI bus> on pcib4 > pcib5: <ACPI PCI-PCI bridge> at device 0.0 on pci4 > pci5: <ACPI PCI bus> on pcib5 > vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem = 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 18 at device 0.0 on pci5 > vgapci0: Boot video device > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > pci0: <memory> at device 31.2 (no driver attached) > acpi_button0: <Sleep Button> on acpi0 > acpi_button1: <Power Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on = acpi0 > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 > ppc0: cannot reserve I/O port range > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > nvme cam probe device init > ugen0.1: <0x8086 XHCI root HUB> at usbus0 > uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on = usbus0 > nvd0: <SAMSUNG MZVPW128HEGM-00000> NVMe namespace > nvd0: 122104MB (250069680 512 byte sectors) > ses0 at ahciem0 bus 0 scbus8 target 0 lun 0 > ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device > ses0: SEMB SES Device > ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 > ada0: <ST3000DM001-1CH166 CC27> ACS-2 ATA SATA 3.x device > ada0: Serial Number W1F50MGQ > ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 2861588MB (5860533168 512 byte sectors) > ada0: quirks=3D0x1<4K> > ada1 at ahcich5 bus 0 scbus5 target 0 lun 0 > ada1: <ST3000DM001-1CH166 CC24> ATA8-ACS SATA 3.x device > ada1: Serial Number W1F29WMP > ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 2861588MB (5860533168 512 byte sectors) > ada1: quirks=3D0x1<4K> > Trying to mount root from zfs:zroot/ROOT/default []... > Root mount waiting for: usbus0 > uhub0: 26 ports with 26 removable, self powered > Root mount waiting for: usbus0 > ugen0.2: <Apple, Inc. Keyboard Hub> at usbus0 > uhub1 on uhub0 > uhub1: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 1> = on usbus0 > Root mount waiting for: usbus0 > uhub1: 3 ports with 2 removable, bus powered > ugen0.3: <Apple, Inc Apple Keyboard> at usbus0 > ukbd0 on uhub1 > ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 2> = on usbus0 > kbd2 at ukbd0 > Root mount waiting for: usbus0 > Root mount waiting for: usbus0 > ugen0.4: <JetFlash Mass Storage Device> at usbus0 > umass0 on uhub0 > umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/11.00, addr = 3> on usbus0 > umass0: SCSI over Bulk-Only; quirks =3D 0x8100 > umass0:9:0: Attached to scbus9 > da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 > da0: <JetFlash Transcend 16GB 1100> Removable Direct Access SCSI = device > da0: Serial Number 05E3MIRCU1FD9Y8U > da0: 40.000MB/s transfers > da0: 15296MB (31326208 512 byte sectors) > da0: quirks=3D0x12<NO_6_BYTE,NO_RC16> > GEOM: da0: the secondary GPT header is not in the last LBA. > ugen0.5: <vendor 0x0557 product 0x7000> at usbus0 > uhub2 on uhub0 > uhub2: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr = 4> on usbus0 > uhub2: 4 ports with 3 removable, self powered > Root mount waiting for: usbus0 > ugen0.6: <vendor 0x0557 product 0x2419> at usbus0 > ukbd1 on uhub2 > ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr = 5> on usbus0 > kbd3 at ukbd1 > nvme0: resetting controller > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0 > nvme0: resetting controller > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0 > nvme0: resetting controller > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0 > nvme0: resetting controller > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0 > nvme0: resetting controller > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:127 nsid:1 lba:2080 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:127 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:126 nsid:1 lba:2592 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:126 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:125 nsid:1 lba:250068000 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:125 cdw0:0 > nvme0: aborting outstanding i/o > nvme0: READ sqid:8 cid:124 nsid:1 lba:250068512 len:224 > nvme0: ABORTED - BY REQUEST (00/07) sqid:8 cid:124 cdw0:0 > igb0: link state changed to UP > uhid0 on uhub1 > uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 2> = on usbus0 > ums0 on uhub2 > ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> = on usbus0 > ums0: 3 buttons and [Z] coordinates ID=3D0 >=20 > _______________________________________________ > freebsd-stable@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to = "freebsd-stable-unsubscribe@freebsd.org" --=20 Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?7C88AB94-17EB-4C66-832F-30D67C064F47>