Date: Fri, 19 Nov 1999 11:44:43 -0500 (EST) From: "Christopher T. Griffiths" <cgriffiths@quansoo.com> To: Mike Whitley <mwhitley@borg.proceon.com> Cc: Bill Woods <wwoods@cybcon.com>, freebsd-mobile@FreeBSD.ORG, freebsd-questions@FreeBSD.ORG Subject: Re: Thinkpad 600E and Xfree.... Message-ID: <Pine.BSF.4.10.9911191141320.3280-200000@defiant.quansoo.com> In-Reply-To: <Pine.BSF.3.96.991119081654.21156A-100000@borg.proceon.com>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] Attached is my config file for my laptop. This is an out of box situation. I am using the xircom 10/100 card and a 3com xjack modem. All done with a little tinkering with pccard.conf. Make sure you are loading the pccard module configuring pccard to work properly. Hope this helps Chris On Fri, 19 Nov 1999, Mike Whitley wrote: > Chris - > > Do you have your 600E working with a "PCMCIA" Ethernet card? > If so, what steps did you go through to get it working? I > basically installed 3.3-stable/then the PAO binaries/then > the PAO sources. I since have been going thru kernel recompiles > to try and get /dev/pcic0 recognized. Unfortunately, I have > had no luck...that's when I saw that there were some earlier > patches available for 2.2.7 to patch relavent source and header > files. Did you patch 3.3 or was it an "out of box" situation? > Sorry for the continued questions...I've done tons of Desktops > with FreeBSD but this is my first laptop. > > Thanks > > - Mike Whitley > > > On Fri, 19 Nov 1999, Christopher T. Griffiths wrote: > > > Actually I am not using cardbus for this laptop. I am using the standard > > pc-card setup with FreeBSD 3.3 -stable. I believe cardbus is not yet > > supported under PAO as well as -stable. From reading -current they are > > working on bringing in cardbus support. Although cardbus controllers will > > still work with the pc-card setup since they should be backward > > compatible. > > > > Thanks > > > > Chris > > > > On Fri, 19 Nov 1999, Mike Whitley wrote: > > > > > > > > I second that...the 600E has a NeoMagic MagicMedia 256AV (per IBM > > > website) which works well at 1024x768/16. I have a 1552 with the > > > same adapter...the mouse setting that seems to work is /dev/psm0 with > > > Microsoft protocol. I am curious to find out if you have your > > > cardbus support working at this point? I think the 600E and 1552 > > > both have the O2Micro OZ6832/6833 Cardbus Controller...Did you > > > apply the earlier 2.2.7 patch? or is there some other workaround? > > > > > > Thanks > > > > > > - Mike Whitley > > > > > > On Fri, 19 Nov 1999, Christopher T. Griffiths wrote: > > > > > > > I am using this laptop and it is the neomagic card. I have it set at > > > > 1024x768 with 16m color. Very nice display. Make sure you are using the > > > > latest Xfree though and you want the SVGA server set to 16m. Hope that > > > > helps. > > > > > > > > Chris > > > > > > > > > > > > On Thu, 18 Nov 1999, Bill Woods wrote: > > > > > > > > > Anyone here managee to get X going on an IBM Thinkpad 600E? What video > > > > > card does this thing have and what is supported by X? > > > > > > > > > > William > > > > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-mobile" in the body of the message > > > Christopher T. Griffiths Senior Network/Systems Administrator Quansoo Group Inc. cgriffiths@quansoo.com Phone: (302) 777-4141 Fax: (302) 777-4142 Mobile: (302) 521-3436 [-- Attachment #2 --] # # kernel config for DEFIANT.quansoo.com # machine definitions machine "i386" cpu "I686_CPU" ident DEFIANT maxusers 10 config kernel root on wd0 # kernel options options DIAGNOSTIC options FAILSAFE options UCONSOLE options USERCONFIG options "MD5" options "MAXMEM=(287*1024)" # compatibility options options "COMPAT_43" options "IBCS2" options "VM86" # sysv options options USER_LDT options SYSVSHM options SYSVSEM options SYSVMSG # network options options INET # filesystem options options FFS options FFS_ROOT options SOFTUPDATES options NFS options NFS_NOSERVER options PROCFS options "CD9660" options "CD9660_ROOTDELAY=20" options MSDOSFS # Video Options options VESA options "VM86" # Oracle Options options SHMMAXPGS=10000 options SHMMNI=100 options SHMSEG=10 options SEMMNS=200 options SEMMNI=70 options SEMMSL=61 # posix options options "P1003_1B" options "_KPOSIX_PRIORITY_SCHEDULING" options "_KPOSIX_VERSION=199309L" # isa options options "AUTO_EOI_1" # atapi options options ATAPI options ATAPI_STATIC # apm/psm options options PSM_HOOKAPM options PSM_RESETAFTERSUSPEND # isa controllers/devices controller isa0 controller atkbdc0 at isa? port "IO_KBD" tty device npx0 at isa? port "IO_NPX" iosiz 0x0 flags 0x0 irq 13 vector npxintr device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port? conflicts device sc0 at isa? tty device apm0 at isa? flags 0x31 device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device pcm0 at isa? port 0x52c tty irq 5 drq 1 flags 0x13 # parallel port controllers/devices device ppc0 at isa? port? net irq ? controller ppbus0 device nlpt0 at ppbus? device ppi0 at ppbus? # ide/atapi controllers/devices controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0xa0ffa0ff vector wdintr controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 device acd0 # floppy controllers/devices controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 # pccard controllers/devices controller card0 device sio2 device xe0 # pseudo devices pseudo-device gzip pseudo-device loop pseudo-device ether pseudo-device pty 16 pseudo-device tun 1 pseudo-device bpfilter 4 pseudo-device splashhelp
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.9911191141320.3280-200000>