Date: Wed, 11 Sep 2002 10:31:10 -0400 From: "alan" <a_trancart@yahoo.fr> To: <freebsd-hardware@FreeBSD.ORG> Subject: RAID : proliant DL-360 freebsd 4.5 Message-ID: <027801c2599f$e0ef5a90$5d01a8c0@alan>
next in thread | raw e-mail | index | archive | help
Hi folks, I'm having trouble with my gateway Fw running on FreeBSD
4.5-RELEASE #1 on a
compaq proliant DL 360
It has crashed several times over the last 2 weeks.. It seems to be a raid
controller
problem althought the ida device is present in my kernel file
here's my dmesg :
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #1: Thu Jul 18 09:41:52 AST 2002
alan@gateway:/usr/src/sys/compile/ITG
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073725440 (1048560K bytes)
avail memory = 1040424960 (1016040K bytes)
Preloaded elf kernel "kernel" at 0xc0496000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
0xc4000000-0xc4ffffff,0xc5000000-0xc5ffffff irq 3 at device 1.0 on pci0
ida0: drives=1 firm_rev=1.42
idad0: <Compaq Logical Drive> on ida0
idad0: 8741MB (17903040 sectors), blocksize=512
pci0: <ATI Mach64-GV graphics accelerator> at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 4.0
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2800-0x280f at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3000-0x303f mem
0xc6e00000-0xc6efffff,0xc6fff000-0xc6ffffff irq 5 at device 4.0 on pci3
fxp0: Ethernet address 00:50:8b:e1:de:6f
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x3040-0x307f mem
0xc6c00000-0xc6cfffff,0xc6dff000-0xc6dfffff irq 7 at device 5.0 on pci3
fxp1: Ethernet address 00:50:8b:e1:de:86
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0685 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
IP Filter: v3.4.20 initialized. Default = block all, Logging = enabled
acd0: CDROM <Compaq CRN-8241B> at ata1-master using PIO4
Mounting root from ufs:/dev/idad0s1a
WARNING: / was not properly dismounted
Has this probleme already been brought ? is this due to a driver problem ?
Can i solve it by rebuilding my kernel someway ?
thx
alan
___________________________________________________________
Do You Yahoo!? -- Une adresse @yahoo.fr gratuite et en français !
Yahoo! Mail : http://fr.mail.yahoo.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?027801c2599f$e0ef5a90$5d01a8c0>