Date: Wed, 8 Jan 2020 14:31:33 +0000 From: Matt Churchyard <matt.churchyard@userve.net> To: "freebsd-virtualization@freebsd.org" <freebsd-virtualization@freebsd.org> Subject: bhyve issues on Dell C6220 node Message-ID: <baa7d5aeac12445195c1044e6e3d90dd@SERVER.ad.usd-group.com>
next in thread | raw e-mail | index | archive | help
Hello, I've recently got hold of some Dell C6220 systems (2 servers in a single chassis) while I was hoping to use for bhyve The basic spec of a single server is as follows - Xeon(R) CPU E5-2670 (VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID) 64GB DDR3 LSI MegaRaid 9265-8i FreeBSD 12.1 I had a bit of trouble getting the disks configured and booting (**probably unrelated but see below for the details). However, my main problem at the moment is that booting either 11.3 or 12.1 in a bhyve guest (using bhyveload) gets as far as starting to boot from the install ISO, then just hangs " Loading kernel... /boot/kernel/kernel text=0x168fdf1 data=0x1d0a68+0x768d80 syms=[0x8+0x178bc0+0x8+0x1969d5] Loading configured modules... can't find '/boot/entropy' / " I get either a "|" or "/" character, then nothing else. I've also tested a windows server 2016 guest, and while that will actually install via UEFI, it is noticeably slow - over a minute to boot to the login screen and everything crawls along I'm at a loss at the moment. My test machine for years has been an old i3-2100 system and that has always booted freebsd & windows guests fairly well I'd be grateful if anyone has any ideas or insight, or whether I just need to scrap the whole idea and either switch to a completely different hypervisor (which I'd really rather not do as I know FreeBSD very well and was planning on making use of ZFS for backups/migration/etc) or find some different systems **Regarding the disks, I didn't really want a raid controller and have ended up creating a jbod (RAID0) volume for each disk, which appears as mfidX. This seems to work fine, although at first I tried to create a single pool of 2 mirrored pairs (4 disks). This failed to boot due to zfs block i/o errors on boot. In the end I had to create a separate boot mirror across 2 partitions, the create a second pool for actual data storage. Regards, Matt Churchyard
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?baa7d5aeac12445195c1044e6e3d90dd>