Date: Thu, 26 May 2005 00:43:50 -0400 From: "Scott I. Remick" <scott@sremick.net> To: freebsd-java@freebsd.org Subject: Re: OS check fails on JDK 1.4 & FreeBSD 5.4R Message-ID: <pan.2005.05.26.04.43.47.621501@sremick.net> References: <pan.2005.05.22.18.40.12.945674@sremick.net> <200505251623.55084.vizion@vizion.occoxmail.com> <pan.2005.05.26.03.50.59.597868@sremick.net> <200505252131.05756.vizion@vizion.occoxmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 25 May 2005 22:31:05 -0700, Vizion wrote:
> Can you please send the output from /var/run/dmesg.boot
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p1 #0: Thu May 19 00:14:10 EDT 2005
scott@scott.bur.adelphia.net:/usr/obj/usr/src/sys/SCOTT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) Processor (1208.75-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<RSVD,AMIE,DSP,3DNow!>
real memory = 536788992 (511 MB)
avail memory = 511430656 (487 MB)
bktr_mem: memory holder loaded
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce2 MX/MX 400> mem 0xd8000000-0xdfffffff,0xd5000000-0xd5ffffff irq 5 at device 0.0 on pci1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge> at device 4.4 (no driver attached)
bktr0: <BrookTree 878> mem 0xd7000000-0xd7000fff irq 9 at device 9.0 on pci0
bktr0: Hauppauge Model 44801 D110
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner.
pci0: <multimedia> at device 9.1 (no driver attached)
pcm0: <Creative EMU10K1> port 0xa400-0xa41f irq 5 at device 10.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x9800-0x98ff mem 0xd4800000-0xd4800fff irq 9 at device 13.0 on pci0
sis0: Silicon Revision: DP83815D
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:02:e3:15:a2:c1
atapci1: <Promise PDC20265 UDMA100 controller> port 0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem 0xd4000000-0xd401ffff irq 10 at device 17.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd27ff,0xcc000-0xcffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
ulpt0: Hewlett-Packard hp LaserJet 1012, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounter "TSC" frequency 1208749540 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <CRD-8400B/1.03> at ata0-master PIO4
ad4: 19595MB <MAXTOR 6L020L1/A93.0500> [39813/16/63] at ata2-master UDMA100
ad6: 76345MB <MAXTOR 6L080J4/A93.0500> [155114/16/63] at ata3-master UDMA100
cd0 at ata0 bus 0 target 0 lun 0
cd0: <LG CD-ROM CRD-8400B 1.03> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad4s1a
sis0: Applying short cable fix (reg=f5)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?pan.2005.05.26.04.43.47.621501>