Date: Sat, 23 Apr 2016 17:12:26 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: jenkins-admin@FreeBSD.org, freebsd-stable@FreeBSD.org Subject: Build failed in Jenkins: FreeBSD_stable_10 #219 Message-ID: <1184886617.1.1461431547101.JavaMail.jenkins@jenkins-9.freebsd.org>
next in thread | raw e-mail | index | archive | help
See <https://jenkins.FreeBSD.org/job/FreeBSD_stable_10/219/>; ------------------------------------------ [...truncated 330949 lines...] pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 virtio_pci0: <VirtIO PCI Network adapter> port 0x2000-0x201f mem 0xc0000000-0xc0001fff irq 16 at device 2.0 on pci0 vtnet0: <VirtIO Networking Adapter> on virtio_pci0 vtnet0: Ethernet address: 58:9c:fc:00:00:2e ahci0: <Intel ICH8 AHCI SATA controller> mem 0xc0002000-0xc00023ff irq 17 at device 3.0 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 qpi0: <QPI system bus> on motherboard sc0: <System console> at flags 0x100 on isa0 sc0: MDA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range Timecounters tick every 1.000 msec ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <BHYVE SATA DISK 001> ACS-2 ATA SATA 3.x device ada0: Serial Number BHYVE-96E1-4ED1-D91D ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 2048MB (4194304 512 byte sectors) ada0: Previously was known as ad4 random: unblocking device. SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ufs/TESTROOT [rw]... Setting hostuuid: 3e43a5a0-0961-11e6-a538-589cfc00002e. Setting hostid: 0x27725829. Entropy harvesting: interrupts ethernet point_to_point swi. Starting file system checks: /dev/ufs/TESTROOT: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ufs/TESTROOT: clean, 220167 free (215 frags, 27494 blocks, 0.0% fragmentation) WARNING: /: correcting fs_sblockloc from 8192 to 65536 Mounting local file systems:. Writing entropy file:. /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). vtnet0: link state changed to UP Starting Network: lo0 vtnet0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> vtnet0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=80028<VLAN_MTU,JUMBO_MTU,LINKSTATE> ether 58:9c:fc:00:00:2e inet 192.168.10.2 netmask 0xffffff00 broadcast 192.168.10.255 nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet 10Gbase-T <full-duplex> status: active Starting devd. add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Generating host.conf. Creating and/or trimming log files. Starting syslogd. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib 32-bit compatibility ldconfig path: /usr/lib32 Clearing /tmp (X related). Updating motd:. Mounting late file systems:. Configuring syscons: blanktime. Generating RSA1 host key. 2048 SHA256:KKz7IHuDYvRagT4IkM2rRUT2NRNhClM9hqSMdhZXi3g root@ (RSA1) Generating RSA host key. 2048 SHA256:UJqqA3EtXKIxEnl6ZNMjjvgOSEYQ3XFLJc5s1Fl2ooA root@ (RSA) Generating DSA host key. 1024 SHA256:/st9d6I4EtP7zWGzU7hvDHGyLnrbiULApv/1AlHZrMw root@ (DSA) Generating ECDSA host key. 256 SHA256:udQAqU80DjpgGN0KcB3s844qpU1jRSHKxHDH4JNcazo root@ (ECDSA) Generating ED25519 host key. 256 SHA256:jimMaktlfAZC09wc/qfJGWcFbgfmNCl1ZfOg5Hm1dw4 root@ (ED25519) Performing sanity check on sshd configuration. Starting sshd. Starting sendmail_submit. Starting sendmail_msp_queue. Starting cron. Starting background file system checks in 60 seconds. Sat Apr 23 14:40:04 UTC 2016 FreeBSD/amd64 (Amnesiac) (ttyu0) login: root root Password:test Apr 23 14:40:05 login: ROOT LOGIN (root) ON ttyu0 FreeBSD 10.3-STABLE (GENERIC) #205 r298511: Sat Apr 23 14:13:45 UTC 2016 Welcome to FreeBSD! Release Notes, Errata: https://www.FreeBSD.org/releases/ Security Advisories: https://www.FreeBSD.org/security/ FreeBSD Handbook: https://www.FreeBSD.org/handbook/ FreeBSD FAQ: https://www.FreeBSD.org/faq/ Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/ FreeBSD Forums: https://forums.FreeBSD.org/ Documents installed with the system are in the /usr/local/share/doc/freebsd/ directory, or can be installed later with: pkg install en-freebsd-doc For other languages, replace "en" with a language code like de or fr. Show the version of FreeBSD installed: freebsd-version ; uname -a Please include that output and any error messages when posting questions. Introduction to manual pages: man man FreeBSD directory layout: man hier Edit /etc/motd to change this login announcement. root@:~ # set prompt="kyuatestprompt # " set prompt="kyuatestprompt # " kyuatestprompt # ifconfig vtnet0 | grep 'inet ' ifconfig vtnet0 | grep 'inet ' inet 192.168.10.2 netmask 0xffffff00 bro Found IP address: 192.168.10.2 [192.168.10.2] run: kyua test [192.168.10.2] out: libexec/atf/atf-sh/atf_check_test:equal -> passed [0.803s] [192.168.10.2] out: libexec/atf/atf-sh/atf_check_test:experr_mismatch -> passed [0.201s] [192.168.10.2] out: libexec/atf/atf-sh/atf_check_test:expout_mismatch -> passed [0.097s] [192.168.10.2] out: libexec/atf/atf-sh/atf_check_test:flush_stdout_on_death -> passed [1.075s] [192.168.10.2] out: libexec/atf/atf-sh/atf_check_test:info_ok -> passed [0.648s] [192.168.10.2] out: libexec/atf/atf-sh/atf_check_test:null_stderr -> passed [0.546s] [192.168.10.2] out: libexec/atf/atf-sh/atf_check_test:null_stdout -> passed [0.344s] [192.168.10.2] out: libexec/atf/atf-sh/config_test:get -> passed [0.261s] [192.168.10.2] out: libexec/atf/atf-sh/config_test:has -> passed [0.256s] [192.168.10.2] out: libexec/atf/atf-sh/integration_test:arguments -> passed [0.050s] [192.168.10.2] out: libexec/atf/atf-sh/integration_test:custom_shell__command_line -> passed [0.134s] [192.168.10.2] out: libexec/atf/atf-sh/integration_test:custom_shell__shebang -> passed [0.319s] [192.168.10.2] out: libexec/atf/atf-sh/integration_test:missing_script -> passed [0.175s] [192.168.10.2] out: libexec/atf/atf-sh/integration_test:no_args -> passed [0.114s] [192.168.10.2] out: libexec/atf/atf-sh/integration_test:set_e -> passed [0.069s] [192.168.10.2] out: libexec/atf/atf-sh/normalize_test:main -> passed [0.170s] [192.168.10.2] out: libexec/atf/atf-sh/tc_test:default_status -> passed [0.174s] [192.168.10.2] out: libexec/atf/atf-sh/tc_test:missing_body -> passed [0.113s] [192.168.10.2] out: libexec/atf/atf-sh/tp_test:srcdir -> passed [0.173s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:eflag_empty -> passed [0.045s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:eflag_file -> passed [0.074s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:eflag_ignore -> passed [0.046s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:eflag_inline -> passed [0.116s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:eflag_match -> passed [0.077s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:eflag_multiple -> passed [0.337s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:eflag_negated -> passed [0.161s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:eflag_save -> passed [0.040s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:invalid_umask -> passed [0.029s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:oflag_empty -> passed [0.130s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:oflag_file -> passed [0.079s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:oflag_ignore -> passed [0.045s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:oflag_inline -> passed [0.115s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:oflag_match -> passed [0.079s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:oflag_multiple -> passed [0.067s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:oflag_negated -> passed [0.808s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:oflag_save -> passed [0.038s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:sflag_eq_ne -> passed [0.082s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:sflag_exit -> passed [0.109s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:sflag_ignore -> passed [0.047s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:sflag_signal -> passed [0.085s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:stdin -> passed [0.031s] [192.168.10.2] out: libexec/atf/atf-check/atf-check_test:xflag -> passed [0.047s] [192.168.10.2] out: sys/acl/00:main -> passed [2.119s] [192.168.10.2] out: sys/acl/01:main -> skipped: system doesn't have ZFS loaded [0.010s] [192.168.10.2] out: sys/acl/02:main -> passed [1.663s] [192.168.10.2] out: sys/acl/03:main -> skipped: system doesn't have ZFS loaded [0.011s] [192.168.10.2] out: sys/acl/04:main -> skipped: system doesn't have ZFS loaded [0.010s] [192.168.10.2] out: sys/aio/aio_test:aio_fifo_test -> skipped: module aio could not be resolved: No such file or directory [0.008s] [192.168.10.2] out: sys/aio/aio_test:aio_file_test -> skipped: module aio could not be resolved: No such file or directory [0.008s] [192.168.10.2] out: sys/aio/aio_test:aio_md_test -> skipped: module aio could not be resolved: No such file or directory [0.009s] [192.168.10.2] out: sys/aio/aio_test:aio_pipe_test -> skipped: module aio could not be resolved: No such file or directory [0.008s] [192.168.10.2] out: sys/aio/aio_test:aio_pty_test -> skipped: module aio could not be resolved: No such file or directory [0.007s] [192.168.10.2] out: sys/aio/aio_test:aio_unix_socketpair_test -> skipped: module aio could not be resolved: No such file or directory [0.007s] [192.168.10.2] out: sys/aio/aio_kqueue_test:main -> passed [0.008s] [192.168.10.2] out: sys/aio/lio_kqueue_test:main -> passed [0.252s] [192.168.10.2] out: sys/fifo/fifo_create:main -> passed [4.994s] [192.168.10.2] out: sys/fifo/fifo_io:main -> passed [10.934s] [192.168.10.2] out: sys/fifo/fifo_misc:main -> passed [0.108s] [192.168.10.2] out: sys/fifo/fifo_open:main -> passed [14.398s] [192.168.10.2] out: sys/file/ftruncate_test:main -> passed [0.048s] [192.168.10.2] out: sys/file/newfileops_on_fork_test:main -> passed [1.055s] [192.168.10.2] out: sys/file/closefrom_test:main -> passed [0.011s] [192.168.10.2] out: sys/file/dup_test:main -> passed [0.011s] [192.168.10.2] out: sys/file/fcntlflags_test:main -> passed [0.009s] [192.168.10.2] out: sys/file/flock_test:main -> passed [6.813s] [192.168.10.2] out: sys/geom/class/concat/1_test:main -> passed [0.476s] [192.168.10.2] out: sys/geom/class/concat/2_test:main -> passed [3.100s] [192.168.10.2] out: sys/geom/class/eli/attach_d_test:main -> passed [2.743s] [192.168.10.2] out: sys/geom/class/eli/configure_b_B_test:main -> passed [0.138s] [192.168.10.2] out: sys/geom/class/eli/delkey_test:main -> passed [0.425s] [192.168.10.2] out: sys/geom/class/eli/detach_l_test:main -> passed [2.208s] [192.168.10.2] out: sys/geom/class/eli/init_B_test:main -> passed [0.202s] [192.168.10.2] out: sys/geom/class/eli/init_J_test:main -> passed [71.750s] [192.168.10.2] out: sys/geom/class/eli/init_a_test:main -> passed [324.483s] [192.168.10.2] out: sys/geom/class/eli/init_i_P_test:main -> passed [0.139s] [192.168.10.2] out: sys/geom/class/eli/init_test:main -> passed [35.852s] [192.168.10.2] out: sys/geom/class/eli/integrity_copy_test:main -> passed [483.252s] [192.168.10.2] out: sys/geom/class/eli/integrity_data_test:main -> passed [182.550s] [192.168.10.2] out: sys/geom/class/eli/integrity_hmac_test:main -> passed [161.540s] [192.168.10.2] out: sys/geom/class/eli/kill_test:main -> passed [1.241s] [192.168.10.2] out: sys/geom/class/eli/nokey_test:main -> passed [0.086s] [192.168.10.2] out: sys/geom/class/eli/onetime_a_test:main -> No handlers could be found for logger "paramiko.transport" Warning: run() received nonzero return code -1 while executing 'kyua test'! [192.168.10.2] run: kyua report --verbose --results-filter passed,skipped,xfail,broken,failed --output test-report.txt Traceback (most recent call last): File "freebsd-ci/scripts/test/run-tests.py", line 207, in <module> main(sys.argv) File "freebsd-ci/scripts/test/run-tests.py", line 79, in main runTest() File "freebsd-ci/scripts/test/run-tests.py", line 184, in runTest fabric.api.run("kyua report --verbose --results-filter passed,skipped,xfail,broken,failed --output test-report.txt") File "/usr/local/lib/python2.7/site-packages/fabric/network.py", line 649, in host_prompting_wrapper return func(*args, **kwargs) File "/usr/local/lib/python2.7/site-packages/fabric/operations.py", line 1056, in run shell_escape=shell_escape) File "/usr/local/lib/python2.7/site-packages/fabric/operations.py", line 923, in _run_command channel=default_channel(), command=wrapped_command, pty=pty, File "/usr/local/lib/python2.7/site-packages/fabric/state.py", line 402, in default_channel chan = _open_session() File "/usr/local/lib/python2.7/site-packages/fabric/state.py", line 389, in _open_session return connections[env.host_string].get_transport().open_session() File "/usr/local/lib/python2.7/site-packages/fabric/network.py", line 159, in __getitem__ self.connect(key) File "/usr/local/lib/python2.7/site-packages/fabric/network.py", line 151, in connect user, host, port, cache=self, seek_gateway=seek_gateway) File "/usr/local/lib/python2.7/site-packages/fabric/network.py", line 575, in connect raise NetworkError(msg, e) fabric.exceptions.NetworkError: Timed out trying to connect to 192.168.10.2 (tried 1 time) [Pipeline] } //node [Pipeline] Allocate node : End [Pipeline] Allocate node : Start Running on master in /usr/local/jenkins/workspace/FreeBSD_stable_10 [Pipeline] node { [Pipeline] step
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1184886617.1.1461431547101.JavaMail.jenkins>