Date: Tue, 16 Nov 2004 06:14:21 +0100 (CET) From: Peter Ulrich Kruppa <root@pukruppa.de> To: Mackgirl1976@aol.com Cc: questions@freebsd.org Subject: Re: ADSL Message-ID: <20041116061250.E13563@pukruppa.net> In-Reply-To: <155.43b54029.2ecad568@aol.com> References: <155.43b54029.2ecad568@aol.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 15 Nov 2004 Mackgirl1976@aol.com wrote: > The CD-ROM drive only half works, if you insert a standard audio cd, programs > such as KsCD and Konquerer will recognize the disc, I really don't know if it > actually plays the discs because the sound driver isn't working right now. > However, if you insert a data disc, such as a VCD, Picture CD, or program CD, > and click the CD-ROM icon in Konquerer, this is what it will say: Did you have a look at www.freebsd.org/handbook 7.2 Setting up the Sound Card? Regards, Uli. > > Error -kio_devices_mounthelper > cd9660: /dev/acd0c: Device busy > Please check that the device is entered properly > > I installed the OS from the same CD drive, but now it doesn't work. Is there > a way to fix this? > > > > Bootup Device List: > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004 > root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz > CPU: AMD Athlon(tm) XP 2000+ (1655.96-MHz 686-class CPU) > Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 > > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > AMD Features=0xc0400000<AMIE,DSP,3DNow!> > real memory = 234815488 (229312K bytes) > avail memory = 222965760 (217740K bytes) > Preloaded elf kernel "kernel" at 0xc0551000. > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 7 entries at 0xc00fde60 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > agp0: <VIA Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device > 0.0 on pci0 > pcib1: <PCI to PCI bridge (vendor=1106 device=b091)> at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <S3 model 8d04 graphics accelerator> at 0.0 irq 11 > rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xef000000-0xef0000ff > irq 10 at device 11.0 on pci0 > rl0: Ethernet address: 00:40:ca:4f:4d:18 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 16.0 > on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 3 at device 16.1 on > pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 10 at device 16.2 > on pci0 > usb2: <VIA 83C572 USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: <USB controller> at 16.3 irq 5 > isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 8235 ATA133 controller> port 0xe000-0xe00f at device 17.1 on > pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 10 > orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xd3fff on isa0 > pmtimer0 on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1: configured irq 3 not in bitmap of probed irqs 0 > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/16 bytes threshold > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ad0: 78167MB <Maxtor 6Y080P0> [158816/16/63] at ata0-master UDMA133 > ad1: 38166MB <WDC WD400EB-00CPF0> [77545/16/63] at ata0-slave UDMA100 > acd0: CD-RW <ATAPI CD-RW 48X24> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" > +---------------------------+ | Peter Ulrich Kruppa | | Wuppertal | | Germany | +---------------------------+
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041116061250.E13563>