Date: Tue, 22 Jun 1999 20:54:15 +0400 (MSD) From: Ilya Obshadko <ilya@zhurnal.ru> To: freebsd-stable@freebsd.org Subject: CAM problems on 3.2-STABLE? Message-ID: <Pine.BSF.4.05.9906222048150.2505-100000@xfire.polit.ru>
next in thread | raw e-mail | index | archive | help
Is this known about any CAM problems on 3.2-STABLE? Backup/restore operations began to produce various errors like this: Jun 21 23:02:33 webserv /kernel: (sa0:ahc0:0:4:0): READ(06). CDB: 8 0 0 80 0 0 Jun 21 23:02:33 webserv /kernel: (sa0:ahc0:0:4:0): MEDIUM ERROR info:8000 asc:0,5 Jun 21 23:02:33 webserv /kernel: (sa0:ahc0:0:4:0): End-of-data detected Jun 21 23:02:34 webserv /kernel: (sa0:ahc0:0:4:0): READ(06). CDB: 8 0 0 80 0 0 Jun 21 23:02:34 webserv /kernel: (sa0:ahc0:0:4:0): MEDIUM ERROR info:8000 asc:0,5 Jun 21 23:02:34 webserv /kernel: (sa0:ahc0:0:4:0): End-of-data detected Jun 21 23:02:34 webserv /kernel: (sa0:ahc0:0:4:0): READ(06). CDB: 8 0 0 80 0 0 Jun 21 23:02:34 webserv /kernel: (sa0:ahc0:0:4:0): MEDIUM ERROR info:8000 asc:0,5 Jun 21 23:02:35 webserv /kernel: (sa0:ahc0:0:4:0): End-of-data detected ------------------------------------------------------------------------ System configuration: May 21 21:30:17 webserv /kernel: ahc0: <Adaptec aic7895 Ultra SCSI adapter> rev 0x03 int a irq 19 on pci0.15.0 May 21 21:30:17 webserv /kernel: ahc0: Using left over BIOS settings May 21 21:30:17 webserv /kernel: ahc0: aic7895 Wide Channel A, SCSI Id=7, 255 SCBs May 21 21:30:17 webserv /kernel: ahc1: <Adaptec aic7895 Ultra SCSI adapter> rev 0x03 int b irq 16 on pci0.15.1 May 21 21:30:17 webserv /kernel: ahc1: Using left over BIOS settings May 21 21:30:17 webserv /kernel: ahc1: aic7895 Wide Channel B, SCSI Id=7, 255 SCBs May 21 21:30:17 webserv /kernel: APIC_IO: Testing 8254 interrupt delivery May 21 21:30:17 webserv /kernel: APIC_IO: Broken MP table detected: 8254 is not connected to IO APIC int pin 2 May 21 21:30:17 webserv /kernel: APIC_IO: routing 8254 via 8259 on pin 0 May 21 21:30:17 webserv /kernel: Waiting 5 seconds for SCSI devices to settle May 21 21:30:17 webserv /kernel: SMP: AP CPU #1 Launched! May 21 21:30:18 webserv /kernel: sa0 at ahc0 bus 0 target 4 lun 0 May 21 21:30:18 webserv /kernel: sa0: <Seagate STT8000N 3.22> Removable Sequential Access SCSI-2 device May 21 21:30:18 webserv /kernel: sa0: 10.000MB/s transfers (10.000MHz, offset 15) May 21 21:30:18 webserv /kernel: changing root device to da0s1a May 21 21:30:18 webserv /kernel: da0 at ahc0 bus 0 target 0 lun 0 May 21 21:30:18 webserv /kernel: da0: <IBM DDRS-39130D DC1B> Fixed Direct Access SCSI-2 de vice May 21 21:30:18 webserv /kernel: da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), T agged Qu May 21 21:30:18 webserv /kernel: eueing Enabled May 21 21:30:18 webserv /kernel: da0: 8715MB (17850000 512 byte sectors: 64H 32S/T 8715C) #-- Ilya Obshadko [IDO-RIPN] -------------------------------# #-- email: ilya@zhurnal.ru, ilya24@chat.ru -----------------# #-- ICQ UIN: 10704338 --------------------------------------# To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9906222048150.2505-100000>