Date: Sat, 30 Dec 1995 05:57:00 -0500 From: Harlan Stenn <Harlan.Stenn@pfcs.com> To: hardware@freebsd.org Subject: Problem talking to an internal USRobotics Sportster Vi... Message-ID: <3584.820321020@mumps.pfcs.com>
next in thread | raw e-mail | index | archive | help
I just got a USR Sportster Vi 28.8 voice/fax modem.
I configured the card for COM3 (ttyd2) and IRQ5. FreeBSD-2.1-STABLE (as
of a couple of months ago) seems to find the card just fine (dmesg
output is below).
I've tried:
cu -s {115000,57600,38400,19200,9600} -l /dev/ttyd2
without success. The "cu" just hangs and has to be killed from another
window.
Any suggestions on how I can get this beast to work will be appreciated.
Thanks...
H
FreeBSD 2.1.0-950928-SNAP #0: Sun Dec 10 19:40:40 EST 1995
supfcs@brown.pfcs.com:/usr/src/sys/compile/BROWN
CPU: 90-MHz Pentium 735\\90 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x524 Stepping=4
Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC>
real memory = 16777216 (16384K bytes)
avail memory = 14819328 (14472K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 at 0x340-0x35f irq 10 on isa
ed1: address 00:40:33:28:36:78, type NE2000 (16 bit)
bpf: ed1 attached
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 at 0x3e8-0x3ef irq 5 on isa
sio2: type 16550A
sio3 not found at 0x2e8
lpt0 at 0x278-0x27f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
bt0: Bt946C/ 0-PCI/EISA/VLB(32bit) bus
bt0: reading board settings, busmastering, int=11
bt0: version 4.25J, fast sync, parity, 32 mbxs, 32 ccbs
bt0: targ 0 sync rate=10.00MB/s(100ns), offset=15
bt0: targ 5 sync rate= 5.00MB/s(200ns), offset=15
bt0: targ 6 sync rate= 4.00MB/s(250ns), offset=15
bt0: Using Strict Round robin scheme
bt0 at 0x330 irq 11 on isa
bt0 waiting for scsi devices to settle
(bt0:0:0): "SEAGATE ST32550N 0014" type 0 fixed SCSI 2
sd0(bt0:0:0): Direct-Access 2047MB (4194058 512 byte sectors)
(bt0:5:0): "ARCHIVE Python 28388-XXX 4.98" type 1 removable SCSI 2
st0(bt0:5:0): Sequential-Access density code 0x13, drive empty
(bt0:6:0): "TOSHIBA CD-ROM XM-3501TA 3384" type 5 removable SCSI 2
cd0(bt0:6:0): CD-ROM cd present.[312922 x 2048 byte records]
npx0 on motherboard
npx0: INT 16 interface
pas0 not found at 0x388
sb0 at 0x220 irq 7 drq 1 on isa
sb0: <SoundBlaster 16 4.12>
sbxvi0 at 0x0 drq 5 on isa
sbxvo0: <SoundBlaster 16 4.12>
sbmidi0 at 0x300 on isa
<SoundBlaster MPU-401>
gus0 not probed due to I/O address conflict with sb0 at 0x220
mss0 not probed due to drq conflict with sb0 at 1
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
mpu0 not probed due to I/O address conflict with bt0 at 0x330
uart0 not probed due to I/O address conflict with bt0 at 0x330
Probing for devices on the PCI bus:
chip0 <SiS 85c501> rev 57 on pci0:0
chip1 <SiS 85c503> rev 0 on pci0:1
vga0 <VGA-compatible display device> rev 0 int a irq 9 on pci0:10
pci0:11: Bus Logic, device=0x1040, class=storage (scsi) [no driver assigned]
pci0:13: CMD, device=0x640, class=storage (ide) [no driver assigned]
changing root device to sd0a
bpf: lo0 attached
bpf: sl0 attached
bpf: tun0 attached
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3584.820321020>