Date: Sun, 09 Apr 2017 04:14:19 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 218478] [patch] Ultra30 panics during boot with PCI card Message-ID: <bug-218478-8-5CPG3Yl8RP@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-218478-8@https.bugs.freebsd.org/bugzilla/> References: <bug-218478-8@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D218478 --- Comment #1 from Yoshihiko Iwama <iwama@t3.rim.or.jp> --- Modified 10.3-RELEASE boot (success) log with Sun StorEdge PCI/PCI-X Dual Ultra320 SCSI Host Adapter(LSI22320-S) and Sun Quad GigaSwift PCI-X Adapter: Sun Ultra 30 UPA/PCI (UltraSPARC-II 296MHz), No Keyboard OpenBoot 3.27, 1152 MB memory installed, Serial #xxxxxxx. Ethernet address 8:0:20:xx:xx:xx, Host ID: xxxxxxxx. Initializing Memory \=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 Initializing Memory /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\= |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-= \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/= -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|= /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\= |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-= \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 Initializing Memory \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/= -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 Initializing Memory \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/= -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|= /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\= |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 Initializing Memory \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/= -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|= /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\= |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Reboot= ing with command: boot /pci@1f,4000/scsi@3/disk@0,0:a Boot device: /pci@1f,4000/scsi@3/disk@0,0:a File and args:=20 >> FreeBSD/sparc64 ZFS boot block Boot path: /pci@1f,4000/scsi@3/disk@0,0:a Consoles: Open Firmware console=20=20 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- FreeBSD/sparc64 ZFS enabled bootstrap loader, Revision 1.0 (root@releng1.nyi.freebsd.org, Thu Aug 13 01:14:14 UTC 2015) bootpath=3D"zfs:zroot/ROOT:" \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/= -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-= \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/kernel data=3D0xbc4440+0xe62a0 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\syms=3D[0x8+0xcc078|/-+0x8+0= xbe0bf\|/] -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/boot/kernel/zfs.ko text=3D0x24d= 818 /-\|/-\|/data=3D0xc1c0+0x8fe28 syms=3D[0x8+0x1c668+0x8+0x179fe-] loading required module 'opensolaris' \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-/boot/kernel/opensolaris.ko text=3D= 0x3010 data=3D0x2c8+0x1a30 syms=3D[0x8+0xd50+0x8+0x90a] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Booting [/boot/kernel/kernel]= in 8 seconds... Booting [/boot/kernel/kernel] in 7 seconds... Booting [/boot/kernel/kernel] in 6 seconds... Booting [/boot/kernel/kernel] in 5 seconds... Booting [/boot/kernel/kernel] in 4 seconds... Booting [/boot/kernel/kernel] in 3 seconds... Booting [/boot/kernel/kernel] in 2 seconds... Booting [/boot/kernel/kernel] in 1 second... Booting [/boot/kernel/kernel]...=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 \|/-\|/-\|jumping to kernel entry at 0xc00a8000. Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE-p17 #0 r315461M: Sat Mar 18 09:15:22 JST 2017 root@ultra30.led.t3.rim.or.jp:/usr/obj/usr/src/sys/GENERIC sparc64 gcc version 4.2.1 20070831 patched [FreeBSD] real memory =3D 1207959552 (1152 MB) avail memory =3D 1151852544 (1098 MB) cpu0: Sun Microsystems UltraSparc-II Processor (295.97 MHz CPU) random: <Software, Yarrow> initialized kbd0 at kbdmux0 nexus0: <Open Firmware Nexus device> pcib0: <U2P UPA-PCI bridge> mem 0x1fe00004000-0x1fe00005fff,0x1fe01000000-0x1fe010000ff,0x1fe00000000-0x1fe= 0000cfff irq 2033,2030,2031,2021,2024,2034 on nexus0 pcib0: Psycho, impl 0, version 4, IGN 0x1f, bus B, 33MHz initializing counter-timer Timecounter "pcib0" frequency 1000000 Hz quality 100 pcib0: DVMA map: 0xfc000000 to 0xffffffff 8192 entries, streaming buffer pcib0: [GIANT-LOCKED] pcib0: [GIANT-LOCKED] pci0: <OFW PCI bus> on pcib0 ebus0: <PCI-EBus2 bridge> mem 0x70000000-0x70ffffff,0x71000000-0x717fffff at device 1.0 on pci0 pcib1: <U2P UPA-PCI bridge> mem 0x1fe00002000-0x1fe00003fff,0x1fe01800000-0x1fe018000ff,0x1fe00000000-0x1fe= 0000cfff irq 2032,2030,2031,2021,2024,2034 on nexus0 pcib1: Psycho, impl 0, version 4, IGN 0x1f, bus A, 66MHz pci1: <OFW PCI bus> on pcib1 pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 pci2: <OFW PCI bus> on pcib2 auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a0= 03,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0 ebus0: <power> addr 0x1400724000-0x1400724003 (no driver attached) ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached) ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached) scc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f i= rq 43 on ebus0 uart0: <SAB 82532 v3.2, channel A> on scc0 stray vector interrupt 2029 uart0: CTS oflow uart0: console (9600,n,8,1) uart1: <SAB 82532 v3.2, channel B> on scc0 uart1: CTS oflow uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0 uart2: keyboard (1200,n,8,1) uart2: keyboard not present uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0 ebus0: <ecpp> addr 0x14003043bc-0x14003043cb,0x1400300398-0x1400300399,0x1400700000-0x14007000= 0f irq 34 (no driver attached) ebus0: <fdthree> addr 0x14003023f0-0x14003023f7,0x1400706000-0x140070600f,0x1400720000-0x14007200= 03 irq 39 (no driver attached) eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0 eeprom0: model mk48t59 ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff= (no driver attached) pcm0: <Sun Audiocs> addr 0x1400200000-0x14002000ff,0x1400702000-0x140070200f,0x1400704000-0x14007040= 0f,0x1400722000-0x1400722003 irq 35,36 on ebus0 pcm0: <CS4231A Codec Id. 10> hme0: <Sun HME 10/100 Ethernet> mem 0x100000-0x107fff at device 1.1 on pci0 miibus0: <MII bus> on hme0 nsphy0: <DP83840 10/100 media interface> PHY 1 on miibus0 nsphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto hme0: Ethernet address: 08:00:20:89:61:0d sym0: <875> port 0x1000-0x10ff mem 0x108000-0x1080ff,0x10a000-0x10afff at device 3.0 on pci0 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem 0x120000-0x13ffff,0x140000-0x15ffff at device 2.0 on pci0 pcib0: guessing interrupt 16 for device 2.0 pin 1 mpt0: MPI Version=3D1.2.14.0 mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x1800-0x18ff mem 0x300000-0x31ffff,0x320000-0x33ffff at device 2.1 on pci0 pcib0: guessing interrupt 17 for device 2.1 pin 2 mpt1: MPI Version=3D1.2.14.0 cas0: <NS DP83065 Saturn Gigabit Ethernet> mem 0x200000-0x3fffff at device = 0.0 on pci2 pcib1: guessing interrupt 0 for device 1.0 pin 1 miibus1: <MII bus> on cas0 nsgphy0: <DP83865 1000BASE-T media interface> PHY 1 on miibus1 none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow cas0: 16kB RX FIFO, 9kB TX FIFO cas0: Ethernet address: 08:00:20:89:61:0d cas1: <NS DP83065 Saturn Gigabit Ethernet> mem 0x600000-0x7fffff at device = 1.0 on pci2 pcib1: guessing interrupt 1 for device 1.0 pin 2 miibus2: <MII bus> on cas1 nsgphy1: <DP83865 1000BASE-T media interface> PHY 1 on miibus2 none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow cas1: 16kB RX FIFO, 9kB TX FIFO cas1: Ethernet address: 08:00:20:89:61:0d cas2: <NS DP83065 Saturn Gigabit Ethernet> mem 0xa00000-0xbfffff at device = 2.0 on pci2 pcib1: guessing interrupt 2 for device 1.0 pin 3 miibus3: <MII bus> on cas2 nsgphy2: <DP83865 1000BASE-T media interface> PHY 1 on miibus3 none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow cas2: 16kB RX FIFO, 9kB TX FIFO cas2: Ethernet address: 08:00:20:89:61:0d cas3: <NS DP83065 Saturn Gigabit Ethernet> mem 0xe00000-0xffffff at device = 3.0 on pci2 pcib1: guessing interrupt 3 for device 1.0 pin 4 miibus4: <MII bus> on cas3 nsgphy3: <DP83865 1000BASE-T media interface> PHY 1 on miibus4 none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow cas3: 16kB RX FIFO, 9kB TX FIFO cas3: Ethernet address: 08:00:20:89:61:0d creator0: <Creator> mem 0x1fc00000000-0x1fc000003ff,0x1fc00400000-0x1fc005fffff,0x1fc00600000-0x1fc= 007fffff,0x1fc01000000-0x1fc013fffff,0x1fc01400000-0x1fc017fffff,0x1fc01800= 000-0x1fc01bfffff,0x1fc01c00000-0x1fc01ffffff,0x1fc02000000-0x1fc02ffffff,0= x1fc03000000-0x1fc03ffffff,0x1fc04000000-0x1fc043fffff,0x1fc04400000-0x1fc0= 47fffff,0x1fc04800000-0x1fc04bfffff,0x1fc04c00000-0x1fc04ffffff,0x1fc050000= 00-0x1fc05ffffff,0x1fc06000000-0x1fc07ffffff,0x1fc09000000-0x1fc097fffff,0x= 1fc09800000-0x1fc09ffffff,0x1fc0a000000-0x1fc0affffff,0x1fc0b000000-0x1fc0b= 7fffff,0x1fc0b800000-0x1fc0bffffff,0x1fc0c000000-0x1fc0c3fffff,0x1fc0c80000= 0-0x1fc0cffffff,0x1fc0d000000-0x1fc0d7fffff,0x1fc0d800000-0x1fc0dffffff irq 1925 on nexus0 creator0: resolution 1152x900 syscons0: <System console> on nexus0 syscons0: Unknown <16 virtual consoles, flags=3D0x100> ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is pres= ent; to enable, add "vfs.zfs.prefetch_disable=3D0" to /boot/loader.c= onf. ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavi= or. Consider tuning vm.kmem_size and vm.kmem_size_max in /boot/loader.conf. ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounter "tick" frequency 295973296 Hz quality 1000 Event timer "tick" frequency 295973296 Hz quality 1000 Timecounters tick every 1.000 msec random: unblocking device. da0 at sym0 bus 0 scbus0 target 0 lun 0 da0: <MAXTOR ATLAS10K4_146SCA DFM0> Fixed Direct Access SCSI-3 device da0: Serial Number B8DL3GJM da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit) da0: Command Queueing enabled da0: 140014MB (286749480 512 byte sectors) da1 at sym0 bus 0 scbus0 target 1 lun 0 da1: <MAXTOR ATLAS10K4_146SCA DFM0> Fixed Direct Access SCSI-3 device da1: Serial Number B8DL38YM da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit) da1: Command Queueing enabled da1: 140014MB (286749480 512 byte sectors) Trying to mount root from zfs:zroot/ROOT []... Setting hostuuid: 387e9b69-5c39-11e5-b180-08002089610d. Setting hostid: 0x9b1c1734. Entropy harvesting: interrupts ethernet point_to_point swi. warning: total configured swap (1237004 pages) exceeds maximum recommended amount (1131200 pages). warning: increase kern.maxswzone or reduce amount of swap. Starting file system checks: Mounting local file systems:. Writing entropy file:. Setting hostname: ultra30.led.t3.rim.or.jp. cas0: link state changed to DOWN cas0: link state changed to UP Starting Network: lo0 hme0 cas0 cas1 cas2 cas3. lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=3D600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128=20 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6=20 inet 127.0.0.1 netmask 0xff000000=20 nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> hme0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE> ether 08:00:20:89:61:0d nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect cas0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3Db<RXCSUM,TXCSUM,VLAN_MTU> ether 08:00:20:89:61:0d inet 192.168.65.15 netmask 0xffffff00 broadcast 192.168.65.255=20 inet6 fe80::a00:20ff:fe89:610d%cas0 prefixlen 64 scopeid 0x2=20 nd6 options=3D23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL> media: Ethernet autoselect (1000baseT <full-duplex>) status: active cas1: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3Db<RXCSUM,TXCSUM,VLAN_MTU> ether 08:00:20:89:61:0d nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect cas2: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3Db<RXCSUM,TXCSUM,VLAN_MTU> ether 08:00:20:89:61:0d nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect cas3: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3Db<RXCSUM,TXCSUM,VLAN_MTU> ether 08:00:20:89:61:0d nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting devd. Starting Network: hme0. hme0: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3D8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE> ether 08:00:20:89:61:0d nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting Network: cas1. cas1: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3Db<RXCSUM,TXCSUM,VLAN_MTU> ether 08:00:20:89:61:0d nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting Network: cas2. cas2: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3Db<RXCSUM,TXCSUM,VLAN_MTU> ether 08:00:20:89:61:0d nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect Starting Network: cas3. cas3: flags=3D8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3Db<RXCSUM,TXCSUM,VLAN_MTU> ether 08:00:20:89:61:0d nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> media: Ethernet autoselect add net default: gateway 192.168.65.1 add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Starting syslogd. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/gcc48 /usr/local/llvm36/lib Starting named. Mar 18 13:37:08 ultra30 named[911]: the working directory is not writable No core dumps found. Clearing /tmp (X related). Starting sj3. Kana-Kanji Conversion Server Version 2.08C Copyright (c) 1990-1995 Sony Corporation Created at Mon Mar 23 16:42:59 JST 1998 /etc/rc: WARNING: failed to start sj3 Removing stale Samba tdb files: ....... done Starting nmbd. Starting smbd. Updating motd:. Mounting late file systems:. Starting ntpd. Mar 18 13:37:16 ultra30 ntpd[1022]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): expired less than 291 days ago Performing sanity check on sshd configuration. Starting sshd. Performing sanity check on apache24 configuration: Syntax OK Starting apache24. Configuring syscons: keymap blanktime. Starting sendmail_submit. Starting sendmail_msp_queue. Starting cron. Starting background file system checks in 60 seconds. Sat Mar 18 13:37:23 JST 2017 FreeBSD/sparc64 (ultra30.led.t3.rim.or.jp) (ttyu0) login: --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-218478-8-5CPG3Yl8RP>