Date: Wed, 05 Jun 2024 04:42:55 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 278613] ASUS PRIME X570-PRO and AMD Ryzen 7 5700G fails to enter S3 with 14.0-RELEASE-p6 Message-ID: <bug-278613-227-iHnVnyZ1PK@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-278613-227@https.bugs.freebsd.org/bugzilla/> References: <bug-278613-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D278613 --- Comment #4 from Enji Cooper <ngie@FreeBSD.org> --- Apologies for taking so long. I'm not 100% sure, but the culprit might be the fact that I'm using graid o= n 2 SATA SSDs using Intel metadata (which, admittedly, is quite invalid on my A= MD chipset motherboard). Looking at /var/log/messages for the timeframe when I= did zzz, this is what I see: Jun 4 21:31:51 gilot kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.G= PP3 Jun 4 21:31:51 gilot kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.G= P17 Jun 4 21:31:51 gilot kernel: pci11: set ACPI power state D0 on \_SB_.PCI0.GP17.VGA_ Jun 4 21:31:51 gilot kernel: pci11: set ACPI power state D0 on \_SB_.PCI0.GP17.D018 Jun 4 21:31:51 gilot kernel: hdaa0: Pin sense: nid=3D3 sense=3D0x7fffffff (disconnected, ELD valid) Jun 4 21:31:51 gilot kernel: hdaa0: Pin sense: nid=3D5 sense=3D0x7fffffff (disconnected, ELD valid) Jun 4 21:31:51 gilot kernel: pci11: set ACPI power state D0 on \_SB_.PCI0.GP17.XHC0 Jun 4 21:31:51 gilot kernel: pci11: set ACPI power state D0 on \_SB_.PCI0.GP17.XHC1=20=20=20=20=20=20=20=20=20 Jun 4 21:31:51 gilot kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.G= P18 Jun 4 21:31:51 gilot kernel: pci12: set ACPI power state D0 on \_SB_.PCI0.GP18.SATA Jun 4 21:31:51 gilot kernel: ahcich6: AHCI reset...=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 Jun 4 21:31:51 gilot kernel: ahcich6: SATA connect timeout time=3D10000us status=3D00000000 Jun 4 21:31:51 gilot kernel: ahcich6: AHCI reset: device not found=20=20= =20=20=20=20=20=20=20=20=20=20=20 Jun 4 21:31:51 gilot kernel: pci0: set ACPI power state D0 on \_SB_.PCI0.S= BRG=20=20 Jun 4 21:31:51 gilot kernel: ahcich1: AHCI reset: device ready after 100ms= =20=20=20=20=20 Jun 4 21:31:51 gilot kernel: ahcich5: AHCI reset: device ready after 100ms= =20=20=20=20=20 Jun 4 21:31:51 gilot kernel: SMP: passed TSC synchronization test=20=20=20= =20=20=20=20=20=20=20=20=20=20=20 Jun 4 21:31:51 gilot kernel: efirtc0: providing initial system time=20=20= =20=20=20=20=20=20=20=20=20=20 Jun 4 21:31:51 gilot kernel: (ada0:ahcich1:0:0:0): resume=20 Jun 4 21:31:51 gilot kernel: (ada1:ahcich5:0:0:0): resume Jun 4 21:31:51 gilot acpi[6476]: resumed at 20240604 21:31:51 Jun 4 21:31:51 gilot ntpd[1310]: ntpd exiting on signal 15 (Terminated)=20= =20=20=20=20=20=20=20 Jun 4 21:31:51 gilot ntpd[6509]: ntpd 4.2.8p16-a (1): Starting=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20 Jun 4 21:31:51 gilot kernel: uhub2 on usbus3=20=20=20=20=20=20=20=20=20=20= =20=20=20=20 Jun 4 21:31:51 gilot kernel: uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3 Jun 4 21:31:51 gilot kernel: uhub3 on usbus2=20=20=20=20=20=20=20=20=20=20= =20=20=20=20 Jun 4 21:31:51 gilot kernel: uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2 Jun 4 21:31:51 gilot ntpd[6509]: Command line: /usr/sbin/ntpd -p /var/db/ntp/ntpd.pid -c /etc/ntp.conf -f /var/db/ntp/ntpd.drift Jun 4 21:31:51 gilot ntpd[6509]: ----------------------------------------------------=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20 Jun 4 21:31:51 gilot ntpd[6509]: ntp-4 is maintained by Network Time Foundation, Jun 4 21:31:51 gilot ntpd[6509]: Inc. (NTF), a non-profit 501(c)(3) public-benefit Jun 4 21:31:51 gilot ntpd[6509]: corporation. Support and training for nt= p-4 are=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 Jun 4 21:31:51 gilot ntpd[6509]: available at https://www.nwtime.org/suppo= rt Jun 4 21:31:51 gilot ntpd[6509]: ---------------------------------------------------- Jun 4 21:31:51 gilot ntpd[6510]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): good hash signature Jun 4 21:31:51 gilot ntpd[6510]: leapsecond file ('/var/db/ntpd.leap-seconds.list'): loaded, expire=3D2024-12-28T00:00:00Z last=3D2017-01-01T00:00:00Z ofs=3D37 I'll see if I can reproduce this by activating the graid on a USB stick. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-278613-227-iHnVnyZ1PK>