Date: Sun, 29 Aug 1999 16:27:47 -0700 From: Parag Patel <parag@cgt.com> To: Mike Smith <mike@smith.net.au> Cc: Bernd Walter <ticso@cicely.de>, freebsd-current@FreeBSD.ORG, grog@lemis.com Subject: Re: 4.0-CURRENT SMP crash with vinum raid-5 and softupdates Message-ID: <78091.935969267@pinhead.parag.codegen.com> In-Reply-To: Message from Mike Smith <mike@smith.net.au> of "Sun, 29 Aug 1999 15:24:32 PDT." <199908292224.PAA15435@dingo.cdrom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 29 Aug 1999 15:24:32 PDT, Mike Smith wrote: > >Make very sure that your vinum kld is in sync with your kernel. Just verified that it is in sync. I had done a "cvsup" of the entire - -CURRENT tree, "make buildworld", "make installworld", build and install a new kernel, and run mergemaster. And reboot, of course. The date on all files in /modules is the correct build date. There doesn't appear to be a utility to check any internal version numbers, and "strings" doesn't put out anything similar. Simple mirroring and striping seems to work, at least for me, but raid-5 makes it unhappy. I'm building a new kernel with gdb serial debug and will try to extract more info from it if possible. First I have to wait for the array to come back from the dead. :) In the meantime, appended is my kernel's config file. -- Parag Patel # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.freebsd.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.ORG/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.184 1999/08/28 00:43:31 peter Exp $ machine i386 cpu I386_CPU cpu I486_CPU cpu I586_CPU cpu I686_CPU ident GENERIC maxusers 32 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores # Soft updates is technique for improving file system speed and # making abrupt shutdown less risky. It is not enabled by default due # to copyright restraints on the code that implement it. # # Read ../../ufs/ffs/README.softupdates to learn what you need to # do to enable this. ../../contrib/softupdates/README gives # more details on how they actually work. # options SOFTUPDATES # turn on kernel debugging and paranoia checks # options DDB options INVARIANTS options INVARIANT_SUPPORT options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to DDB # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): options NCPU=4 #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs controller isa0 controller pnp0 # PnP support for ISA controller eisa0 controller pci0 # Floppy drives controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 # IDE controller and disks controller wdc0 at isa? port IO_WD1 irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? disable port IO_WD2 irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 # ATAPI devices on wdc? device wcd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) device wst0 #IDE Tape (e.g. Travan) # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 # NCR/Symbios Logic #controller ahb0 # EISA AHA1742 family controller ahc0 # AHA2940 and onboard AIC7xxx devices #controller isp0 # Qlogic family #controller dpt0 # DPT Smartcache - See LINT for options! #controller adv0 at isa? port ? irq ? #controller adw0 #controller bt0 at isa? port ? irq ? controller aha0 at isa? port ? irq ? # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. controller scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI access) # Proprietary or custom CD-ROM Interfaces #device wt0 at isa? port 0x300 irq 5 drq 1 #device mcd0 at isa? port 0x300 irq 10 #device matcd0 at isa? port 0x230 #device scd0 at isa? port 0x230 # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver #pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) device apm0 at nexus? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? # Serial (COM) ports # sio0 is both console and debug port: device sio0 at isa? port IO_COM1 flags 0x90 irq 4 device sio1 at isa? port IO_COM2 irq 3 #device sio2 at isa? disable port IO_COM3 irq 5 #device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 irq 7 controller ppbus0 # Parallel port bus (required) device lpt0 # Printer device plip0 # TCP/IP over parallel device ppi0 # Parallel port interface device #controller vpo0 # Requires scbus and da0 # MII bus support, required for some 10/100 NICs controller miibus0 # PCI Ethernet NICs. #device al0 # ADMtek AL981 (``Comet'') #device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) #device mx0 # Macronix 98713/98715/98725 (``PMAC'') #device pn0 # Lite-On 82c168/82c169 (``PNIC'') #device rl0 # RealTek 8129/8139 #device sf0 # Adaptec AIC-6915 (``Starfire'') #device ste0 # Sundance ST201 (D-Link DFE-550TX) #device tl0 # Texas Instruments ThunderLAN #device tx0 # SMC 9432TX (83c170 ``EPIC'') #device vr0 # VIA Rhine, Rhine II device vx0 # 3Com 3c590, 3c595 (``Vortex'') #device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 irq 10 #device ex0 at isa? port? irq? #device fe0 at isa? port 0x300 irq ? #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 #device lnc0 at isa? port 0x280 irq 10 drq 0 #device cs0 at isa? port 0x300 irq ? # requires PCCARD (PCMCIA) support to be activated #device xe0 at isa? port? irq ? # PCCARD NIC drivers. # ze and zp take over the pcic and cannot coexist with generic pccard # support, nor the ed and ep drivers they replace. #device ze0 at isa? port 0x300 irq 10 iomem 0xd8000 #device zp0 at isa? port 0x300 irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device sl 1 # Kernel SLIP pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel, for ppp(1) pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # USB support #controller uhci0 # UHCI PCI->USB interface #controller ohci0 # OHCI PCI->USB interface #controller usb0 # USB Bus (required) #device ugen0 # Generic #device uhid0 # "Human Interface Devices" #device ukbd0 # Keyboard #device ulpt0 # Printer #controller umass0 # Disks/Mass storage - Requires scbus and da0 #device ums0 # Mouse To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?78091.935969267>