Date: Sat, 19 Feb 2011 12:02:01 +0100 From: Rick van der Zwet <info@rickvanderzwet.nl> To: freebsd-stable@freebsd.org Subject: 8.2-PRERELEASE MacbookPro4,1, atapci/ata stall during boot Message-ID: <AANLkTi=Hk6TtWzh_zAOJuXmK7=QT1oR3aGB7XpWr3GiG@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] I am testing 8.2-PRERELEASE (http://svn.freebsd.org/base/stable/8) and I find my MacBookPro 4,1 stalls during boot (see picture http://www.flickr.com/photos/rickvanderzwet/5453484178/, unable to gather textdumps), during probing of the disk ata3. Problem is also present in head, but 8.1-RELEASE was working fine. I have isolated the problem by reverting sys/dev/ata back when to 8.1-RELEASE and boot seems to work again (but this is more a workaround and by far a proper fix). # cd /usr/src-stable/sys/dev/ata/ # svn diff -rHEAD:210188 > revert-to-8.1-RELEASE.patch # patch -p0 -i revert-to-8.1-RELEASE.patch Attached dmidecode, verbose dmesg of 8.1-RELEASE, verbose booting of 8.2-PRERELEASE with the patches applied. If you have a specific revision change you like me to test or need more information please let me know. Br. /Rick -- http://rickvanderzwet.nl [-- Attachment #2 --] # dmidecode 2.10 SMBIOS 2.4 present. 45 structures occupying 2075 bytes. Table at 0x000E0000. Handle 0x0000, DMI type 4, 35 bytes Processor Information Socket Designation: U2E1 Type: Central Processor Family: Other Manufacturer: Intel(R) Corporation ID: 76 06 01 00 FF FB EB BF Signature: Type 0, Family 6, Model 23, Stepping 6 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz Voltage: 1.6 V External Clock: 200 MHz Max Speed: 2400 MHz Current Speed: 2400 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0002 L2 Cache Handle: Not Provided L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Unknown Part Number: Not Specified Handle 0x0001, DMI type 7, 19 bytes Cache Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Instruction Associativity: 8-way Set-associative Handle 0x0002, DMI type 7, 19 bytes Cache Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0003, DMI type 4, 35 bytes Processor Information Socket Designation: U2E1 Type: Central Processor Family: Other Manufacturer: Intel(R) Corporation ID: 76 06 01 00 FF FB EB BF Signature: Type 0, Family 6, Model 23, Stepping 6 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz Voltage: 1.6 V External Clock: 200 MHz Max Speed: 2400 MHz Current Speed: 2400 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0005 L2 Cache Handle: Not Provided L3 Cache Handle: Not Provided Serial Number: Not Specified Asset Tag: Unknown Part Number: Not Specified Handle 0x0004, DMI type 7, 19 bytes Cache Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Instruction Associativity: 8-way Set-associative Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: Unknown Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 32 kB Maximum Size: 32 kB Supported SRAM Types: Asynchronous Installed SRAM Type: Asynchronous Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0006, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 4 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0007, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Array Handle: 0x0006 Partition Width: 0 Handle 0x0008, DMI type 17, 27 bytes Memory Device Array Handle: 0x0006 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: SODIMM Set: None Locator: DIMM0 Bank Locator: BANK 0 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: 0x7F98000000000000 Serial Number: 0x69CC540B Asset Tag: Unknown Part Number: 0x393955353239352D3031312E4130304C4600 Handle 0x0009, DMI type 130, 138 bytes OEM-specific Type Header and Data: 82 8A 09 00 08 00 00 00 80 00 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00 0C 08 38 01 04 00 03 3D 50 50 60 3C 1E 3C 2D 01 20 27 10 17 3C 1E 1E 00 06 3C 7F 80 18 22 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 15 7F 98 00 00 00 00 00 00 05 39 39 55 35 32 39 35 2D 30 31 31 2E 41 30 30 4C 46 00 00 00 08 31 69 CC 54 0B 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Handle 0x000A, DMI type 17, 27 bytes Memory Device Array Handle: 0x0006 Error Information Handle: No Error Total Width: 64 bits Data Width: 64 bits Size: 2048 MB Form Factor: SODIMM Set: None Locator: DIMM1 Bank Locator: BANK 1 Type: DDR2 Type Detail: Synchronous Speed: 667 MHz Manufacturer: 0x7F98000000000000 Serial Number: 0x1FCCB37C Asset Tag: Unknown Part Number: 0x393955353239352D3031312E4130304C4600 Handle 0x000B, DMI type 130, 138 bytes OEM-specific Type Header and Data: 82 8A 0B 00 0A 00 00 00 80 00 80 08 08 0E 0A 61 40 00 05 30 45 00 82 08 00 00 0C 08 38 01 04 00 03 3D 50 50 60 3C 1E 3C 2D 01 20 27 10 17 3C 1E 1E 00 06 3C 7F 80 18 22 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 15 7F 98 00 00 00 00 00 00 05 39 39 55 35 32 39 35 2D 30 31 31 2E 41 30 30 4C 46 00 00 00 08 31 1F CC B3 7C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Handle 0x000C, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Device Handle: 0x0008 Memory Array Mapped Address Handle: 0x0007 Partition Row Position: Unknown Interleave Position: 1 Interleaved Data Depth: 1 Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x0007 Partition Row Position: Unknown Interleave Position: 2 Interleaved Data Depth: 1 Handle 0x000E, DMI type 0, 24 bytes BIOS Information Vendor: Apple Inc. Version: MBP41.88Z.00C1.B03.0802271651 Release Date: 02/27/08 ROM Size: 2048 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported ACPI is supported IEEE 1394 boot is supported Smart battery is supported Function key-initiated network boot is supported BIOS Revision: 0.1 Handle 0x000F, DMI type 1, 27 bytes System Information Manufacturer: Apple Inc. Product Name: MacBookPro4,1 Version: 1.0 Serial Number: W88302P1YJZ UUID: 26A96EAC-CD73-7A49-8B7C-2DA8F466D971 Wake-up Type: Power Switch SKU Number: System SKU# Family: MacBook Pro Handle 0x0010, DMI type 2, 16 bytes Base Board Information Manufacturer: Apple Inc. Product Name: Mac-F42C89C8 Version: PVT Serial Number: 1 Asset Tag: Base Board Asset Tag Features: Board is a hosting board Board is replaceable Location In Chassis: Part Component Chassis Handle: 0x0011 Type: Motherboard Contained Object Handles: 0 Handle 0x0011, DMI type 3, 21 bytes Chassis Information Manufacturer: Apple Inc. Type: Unknown Lock: Not Present Version: Mac-F42C89C8 Serial Number: W88302P1YJZ Asset Tag: Asset Tag# Boot-up State: Safe Power Supply State: Safe Thermal State: Other Security Status: Other OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: Unspecified Contained Elements: 0 Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: Other External Reference Designator: FireWire 400 External Connector Type: None Port Type: Other Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: Other External Reference Designator: FireWire 800 External Connector Type: None Port Type: Other Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: Ethernet External Connector Type: RJ-45 Port Type: Network Port Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: Other External Reference Designator: DVI External Connector Type: None Port Type: Other Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: Other External Reference Designator: Microphone External Connector Type: None Port Type: Other Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: Other External Reference Designator: Speaker External Connector Type: None Port Type: Other Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: Audio Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: Audio Line Out External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: Other External Reference Designator: MagSafe DC Power External Connector Type: None Port Type: Other Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: SATA Port A Internal Connector Type: On Board IDE External Reference Designator: None External Connector Type: None Port Type: Other Handle 0x001E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: PATA (ODD) Internal Connector Type: On Board IDE External Reference Designator: None External Connector Type: None Port Type: Other Handle 0x001F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: None Internal Connector Type: None External Reference Designator: PCI-Express Mini Card External Connector Type: Other Port Type: Other Handle 0x0020, DMI type 9, 13 bytes System Slot Information Designation: AirPort Type: x1 PCI Express Current Usage: Available Length: Short ID: 5 Characteristics: 3.3 V is provided Hot-plug devices are supported SMBus signal is supported Handle 0x0021, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: Nvidia G84 Video Handle 0x0022, DMI type 10, 6 bytes On Board Device Information Type: Sound Status: Enabled Description: Azalia Audio Codec Handle 0x0023, DMI type 10, 6 bytes On Board Device Information Type: Ethernet Status: Enabled Description: Yukon Ultra Ethernet Controller Handle 0x0024, DMI type 10, 6 bytes On Board Device Information Type: Other Status: Enabled Description: Sata Handle 0x0025, DMI type 10, 6 bytes On Board Device Information Type: Other Status: Enabled Description: Pata Handle 0x0126, DMI type 12, 5 bytes System Configuration Options Handle 0x0127, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 <BAD INDEX> Currently Installed Language: Not Specified Handle 0x0128, DMI type 22, 32 bytes Portable Battery Location: Unknown Manufacturer: Unknown Manufacture Date: Unknown Serial Number: Unknown Name: Unknown Design Capacity: Unknown Design Voltage: Unknown SBDS Version: Unknown Maximum Error: Unknown SBDS Chemistry: Unknown OEM-specific Information: 0x00000000 Handle 0x0129, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x012A, DMI type 131, 6 bytes OEM-specific Type Header and Data: 83 06 2A 01 01 03 Handle 0x012B, DMI type 128, 88 bytes OEM-specific Type Header and Data: 80 58 2B 01 03 00 00 00 03 14 00 C0 FF 3F 00 C0 01 02 03 00 00 00 00 00 00 00 FD FF FF FF FF FF 00 00 E0 FF FF FF F8 FF 00 00 FA FF FF FF FC FF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Handle 0xFFFD, DMI type 127, 4 bytes End Of Table [-- Attachment #3 --] Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Preloaded elf kernel "/boot/kernel.works/kernel" at 0xffffffff80e6c000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2394024852 Hz CPU: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz (2394.02-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000e9b000 - 0x00000000b5652fff, 3027992576 bytes (739256 pages) 0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages) avail memory = 4079362048 (3890 MB) ACPI APIC Table: <APPLE Apple00> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x010000-0x01ffff at 0xffffff800001a000 x86bios: EBDA 0x09f000-0x09ffff at 0xffffff000009f000 x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfe020 00024 (v2 APPLE ) ACPI: XSDT 0xbfeee1c0 00084 (v1 APPLE Apple00 000000C1 01000013) ACPI: FACP 0xbfeec000 000F4 (v3 APPLE Apple00 000000C1 Loki 0000005F) ACPI: DSDT 0xbfee1000 0498E (v1 APPLE MacBookP 00040001 INTL 20061109) ACPI: FACS 0xbfecc000 00040 ACPI: HPET 0xbfeeb000 00038 (v1 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 0xbfeea000 00068 (v1 APPLE Apple00 00000001 Loki 0000005F) ACPI: MCFG 0xbfee9000 0003C (v1 APPLE Apple00 00000001 Loki 0000005F) ACPI: ASF! 0xbfee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 0xbfee7000 00030 (v1 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 0xbfee6000 00053 (v1 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 0xbfec7000 004DC (v1 APPLE CpuPm 00003000 INTL 20061109) ACPI: SSDT 0xbfec6000 0025F (v1 APPLE Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 0xbfec5000 000A6 (v1 APPLE Cpu1Tst 00003000 INTL 20061109) ACPI: SSDT 0xbfee0000 00544 (v1 SataRe SataPri 00001000 INTL 20061109) ACPI: SSDT 0xbfedf000 00477 (v1 SataRe SataSec 00001000 INTL 20061109) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: <APPLE Apple00> on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xffffff800000f000 pa 0x4000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.MCHC.HBUS -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 ACPI timer: 1/2 1/1 1/1 1/2 1/2 1/1 1/2 1/2 0/3 1/2 -> 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0xbfecaa98 00340 (v1 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 0xbfec8c18 002AD (v1 APPLE Cpu0Cst 00003001 INTL 20061109) cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xbfec9f18 000C8 (v1 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: SSDT 0xbfec8f18 00085 (v1 APPLE Cpu1Cst 00003000 INTL 20061109) pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 7 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 9 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_lid0: enable wake failed acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a01, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2834, revid=0x04 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x80c0, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 20 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x80c0 found-> vendor=0x8086, dev=0x2835, revid=0x04 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x80a0, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x80a0 found-> vendor=0x8086, dev=0x283a, revid=0x04 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb504c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 21 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdb504c00 found-> vendor=0x8086, dev=0x284b, revid=0x04 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xdb500000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x283f, revid=0x04 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2843, revid=0x04 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2847, revid=0x04 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2849, revid=0x04 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2830, revid=0x04 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x8080, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x8080 found-> vendor=0x8086, dev=0x2831, revid=0x04 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0x8060, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x8060 found-> vendor=0x8086, dev=0x2832, revid=0x04 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 map[20]: type I/O Port, range 32, base 0x8040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 21 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x8040 found-> vendor=0x8086, dev=0x2836, revid=0x04 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb504800, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 20 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdb504800 found-> vendor=0x8086, dev=0x2448, revid=0xf4 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2815, revid=0x04 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x04 domain=0, bus=0, slot=31, func=1 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[10]: type I/O Port, range 32, base 0x8108, size 3, enabled map[14]: type I/O Port, range 32, base 0x811c, size 2, enabled map[18]: type I/O Port, range 32, base 0x8100, size 3, enabled map[1c]: type I/O Port, range 32, base 0x8118, size 2, enabled map[20]: type I/O Port, range 32, base 0x80e0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2828, revid=0x04 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x80f8, size 3, enabled map[14]: type I/O Port, range 32, base 0x8114, size 2, enabled map[18]: type I/O Port, range 32, base 0x80f0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x8110, size 2, enabled map[20]: type I/O Port, range 32, base 0x8020, size 4, enabled map[24]: type I/O Port, range 32, base 0x4000, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 18 found-> vendor=0x8086, dev=0x283e, revid=0x04 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type Memory, range 32, base 0xdb505000, size 8, enabled map[20]: type I/O Port, range 32, base 0xefa0, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 20 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x7000-0x7fff pcib1: memory decode 0xd0000000-0xd30fffff pcib1: prefetched decode 0xc0000000-0xcfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0407, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xd2000000, size 24, enabled pcib1: requested memory range 0xd2000000-0xd2ffffff: good map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type Memory, range 64, base 0xd0000000, size 25, enabled pcib1: requested memory range 0xd0000000-0xd1ffffff: good map[24]: type I/O Port, range 32, base 0x7000, size 7, enabled pcib1: requested I/O range 0x7000-0x707f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0x7000-0x707f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x80c0-0x80df irq 20 at device 26.0 on pci0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x80a0-0x80bf irq 16 at device 26.1 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xdb504c00-0xdb504fff irq 21 at device 26.7 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <PCI-PCI bridge> at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: <PCI bus> on pcib2 pci2: domain=0, physical bus=2 pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 10 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pcib4: domain 0 pcib4: secondary bus 11 pcib4: subordinate bus 11 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xd7300000-0xd73fffff pcib4: no prefetched decode pci11: <ACPI PCI bus> on pcib4 pci11: domain=0, physical bus=11 found-> vendor=0x14e4, dev=0x4328, revid=0x05 domain=0, bus=11, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd7300000, size 14, enabled pcib4: requested memory range 0xd7300000-0xd7303fff: good pcib4: matched entry for 11.0.INTA pcib4: slot 0 INTA hardwired to IRQ 16 pci11: <network> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pcib5: domain 0 pcib5: secondary bus 12 pcib5: subordinate bus 12 pcib5: I/O decode 0x5000-0x5fff pcib5: memory decode 0xd7200000-0xd72fffff pcib5: no prefetched decode pci12: <ACPI PCI bus> on pcib5 pci12: domain=0, physical bus=12 found-> vendor=0x11ab, dev=0x436a, revid=0x13 domain=0, bus=12, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd7200000, size 14, enabled pcib5: requested memory range 0xd7200000-0xd7203fff: good map[18]: type I/O Port, range 32, base 0x5000, size 8, enabled pcib5: requested I/O range 0x5000-0x50ff: in range pcib5: matched entry for 12.0.INTA pcib5: slot 0 INTA hardwired to IRQ 17 mskc0: <Marvell Yukon 88E8058 Gigabit Ethernet> port 0x5000-0x50ff mem 0xd7200000-0xd7203fff irq 17 at device 0.0 on pci12 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd7200000 mskc0: MSI count : 1 mskc0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 mskc0: using IRQ 256 for MSI mskc0: RAM buffer size : 0KB msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:22:41:26:ec:4e miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto mskc0: [MPSAFE] mskc0: [ITHREAD] uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x8080-0x809f irq 16 at device 29.0 on pci0 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x8060-0x807f irq 18 at device 29.1 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 uhci3: [MPSAFE] uhci3: [ITHREAD] usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x8040-0x805f irq 21 at device 29.2 on pci0 uhci4: [MPSAFE] uhci4: [ITHREAD] usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xdb504800-0xdb504bff irq 20 at device 29.7 on pci0 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus6: EHCI version 1.0 usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib6: domain 0 pcib6: secondary bus 13 pcib6: subordinate bus 13 pcib6: I/O decode 0xf000-0xfff pcib6: memory decode 0xd7100000-0xd71fffff pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci13: <ACPI PCI bus> on pcib6 pci13: domain=0, physical bus=13 found-> vendor=0x104c, dev=0x8025, revid=0x02 domain=0, bus=13, slot=3, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7104000, size 11, enabled pcib6: requested memory range 0xd7104000-0xd71047ff: good map[14]: type Memory, range 32, base 0xd7100000, size 14, enabled pcib6: requested memory range 0xd7100000-0xd7103fff: good fwohci0: <Texas Instruments TSB82AA2> mem 0xd7104000-0xd71047ff,0xd7100000-0xd7103fff at device 3.0 on pci13 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd7104000 pcib6: matched entry for 13.3.INTA pcib6: slot 3 INTA hardwired to IRQ 19 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:22:41:ff:fe:45:e6:88 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x154c000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:22:41:45:e6:88 fwe0: bpf attached fwe0: Ethernet address: 02:22:41:45:e6:88 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:22:41:ff:fe:45:e6:88 @ 0xfffe00000000, S800, maxrec 4096 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x8108-0x810f,0x811c-0x811f,0x8100-0x8107,0x8118-0x811b,0x80e0-0x80ef irq 21 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x80e0 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8108 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x811c ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata2: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=00 stat1=00 devices=0x10000 ata2: [MPSAFE] ata2: [ITHREAD] atapci1: <Intel ICH8M SATA300 controller> port 0x80f8-0x80ff,0x8114-0x8117,0x80f0-0x80f7,0x8110-0x8113,0x8020-0x802f,0x4000-0x400f irq 18 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8020 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x4000 ata3: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x80f8 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8114 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x80f0 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8110 ata4: reset tp1 mask=03 ostat0=7f ostat1=7f ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff ata4: reset tp2 stat0=ff stat1=ff devices=0x0 ata4: [MPSAFE] ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) battery0: <ACPI Control Method Battery> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) ex_isa_identify() isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: unable to get the current command byte value. kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:ffffffff psm0: unable to get the current command byte value. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Device configuration finished. Reducing kern.maxvnodes 256548 -> 100000 procfs registered lapic: Divisor 2, Frequency 99751040 Hz Timecounter "TSC" frequency 2394024852 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected. ata2: Identifying devices: 00010000firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 fwohci0: phy int ata2: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire acpi_acad0: acline initialization startacd0: setting UDMA66 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 acd0: <MATSHITADVD-R UJ-867/HA13> DVDR drive at ata2 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA66 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata3: Identifying devices: 00000001 ata3: New devices: 00000001 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: setting UDMA100 ad6: 190782MB <Hitachi HTS542520K9SA00 BBDAC3GP> at ata3-master UDMA100 ad6: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad6 battery0: battery initialization done, tried 1 times ad6: Intel check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 49 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 50 msi: Assigning MSI IRQ 256 to local APIC 1 vector 51 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Root mount waiting for: usbus6 usbus2 uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered Root mount waiting for: usbus6 usbus2 ugen6.2: <Apple Inc.> at usbus6 Root mount waiting for: usbus6 ugen0.2: <Apple Inc.> at usbus0 uhub7: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus0 Trying to mount root from ufs:/dev/ad6p3 uhub7: 3 ports with 0 removable, self powered ct_to_ts([2011-02-17 10:53:31]) = 1297940011.000000000 start_init: trying /sbin/init ugen5.2: <Apple Computer, Inc.> at usbus5 uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on usbus5 ugen0.3: <Apple Inc.> at usbus0 ugen0.4: <vendor 0x05ac> at usbus0 ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on usbus0 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 ugen5.3: <Apple, Inc.> at usbus5 ukbd1: <Apple Internal Keyboard> on usbus5 kbd3 at ukbd1 kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000 uhid1: <Touchpad> on usbus5 ums0: <Touchpad> on usbus5 ums0: 3 buttons and [XY] coordinates ID=2 ugen0.5: <vendor 0x05ac> at usbus0 ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 5> on usbus0 ums1: 3 buttons and [XY] coordinates ID=2 ugen0.6: <vendor 0x0e6a> at usbus0 ukbd2: <HID Keyboard Device> on usbus0 kbd: new array size 8 kbd4 at ukbd2 kbd4: ukbd2, generic (0), config:0x0, flags:0x3d0000 uhid2: <HID Keyboard Hot Keys> on usbus0 msk0: link state changed to UP [-- Attachment #4 --] Table 'FACP' at 0xbfeec000 Table 'HPET' at 0xbfeeb000 Table 'APIC' at 0xbfeea000 APIC: Found table at 0xbfeea000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) Copyright (c) 1992-2011 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.2-PRERELEASE #2 r218713M: Thu Feb 17 12:18:28 UTC 2011 root@macdev.vanderzwet.net:/usr/obj/usr/src-stable/sys/GENERIC amd64 Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80ea4000. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2394021384 Hz CPU: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz (2394.02-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x8e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 4294967296 (4096 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000ed3000 - 0x00000000b5652fff, 3027763200 bytes (739200 pages) 0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages) avail memory = 4073529344 (3884 MB) ACPI APIC Table: <APPLE Apple00> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000 x86bios: SSEG 0x010000-0x01ffff at 0xffffff8000016000 x86bios: EBDA 0x09f000-0x09ffff at 0xffffff000009f000 x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000 APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xfe020 00024 (v02 APPLE ) ACPI: XSDT 0xbfeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013) ACPI: FACP 0xbfeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F) ACPI: DSDT 0xbfee1000 0498E (v01 APPLE MacBookP 00040001 INTL 20061109) ACPI: FACS 0xbfecc000 00040 ACPI: HPET 0xbfeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: APIC 0xbfeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: MCFG 0xbfee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ASF! 0xbfee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F) ACPI: SBST 0xbfee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: ECDT 0xbfee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F) ACPI: SSDT 0xbfec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109) ACPI: SSDT 0xbfec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109) ACPI: SSDT 0xbfec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109) ACPI: SSDT 0xbfee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109) ACPI: SSDT 0xbfedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 1 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 acpi0: <APPLE Apple00> on motherboard PCIe: Memory Mapped configuration base @ 0xf0000000 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 ACPI timer: 1/1 1/2 1/1 1/1 0/3 1/1 1/1 1/1 1/1 1/2 -> 9 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 ACPI: SSDT 0xbfecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109) ACPI: SSDT 0xbfec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109) cpu1: <ACPI CPU> on acpi0 ACPI: SSDT 0xbfec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109) ACPI: SSDT 0xbfec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109) pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 7 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 9 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 9 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x2a00, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2a01, revid=0x03 domain=0, bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 3 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2834, revid=0x04 domain=0, bus=0, slot=26, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type I/O Port, range 32, base 0x80c0, size 5, enabled pcib0: matched entry for 0.26.INTA pcib0: slot 26 INTA hardwired to IRQ 20 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x80c0 found-> vendor=0x8086, dev=0x2835, revid=0x04 domain=0, bus=0, slot=26, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0x80a0, size 5, enabled pcib0: matched entry for 0.26.INTB pcib0: slot 26 INTB hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x80a0 found-> vendor=0x8086, dev=0x283a, revid=0x04 domain=0, bus=0, slot=26, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb504c00, size 10, enabled pcib0: matched entry for 0.26.INTC pcib0: slot 26 INTC hardwired to IRQ 21 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdb504c00 found-> vendor=0x8086, dev=0x284b, revid=0x04 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xdb500000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x283f, revid=0x04 domain=0, bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2843, revid=0x04 domain=0, bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2847, revid=0x04 domain=0, bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2849, revid=0x04 domain=0, bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 MSI supports 1 message found-> vendor=0x8086, dev=0x2830, revid=0x04 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0x8080, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 16 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x8080 found-> vendor=0x8086, dev=0x2831, revid=0x04 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0x8060, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 18 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x8060 found-> vendor=0x8086, dev=0x2832, revid=0x04 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 map[20]: type I/O Port, range 32, base 0x8040, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 21 unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x8040 found-> vendor=0x8086, dev=0x2836, revid=0x04 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xdb504800, size 10, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 20 unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdb504800 found-> vendor=0x8086, dev=0x2448, revid=0xf4 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2815, revid=0x04 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2850, revid=0x04 domain=0, bus=0, slot=31, func=1 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 map[10]: type I/O Port, range 32, base 0x8108, size 3, enabled map[14]: type I/O Port, range 32, base 0x811c, size 2, enabled map[18]: type I/O Port, range 32, base 0x8100, size 3, enabled map[1c]: type I/O Port, range 32, base 0x8118, size 2, enabled map[20]: type I/O Port, range 32, base 0x80e0, size 4, enabled pcib0: matched entry for 0.31.INTA pcib0: slot 31 INTA hardwired to IRQ 21 found-> vendor=0x8086, dev=0x2828, revid=0x04 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x80f8, size 3, enabled map[14]: type I/O Port, range 32, base 0x8114, size 2, enabled map[18]: type I/O Port, range 32, base 0x80f0, size 3, enabled map[1c]: type I/O Port, range 32, base 0x8110, size 2, enabled map[20]: type I/O Port, range 32, base 0x8020, size 4, enabled map[24]: type I/O Port, range 32, base 0x4000, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 18 found-> vendor=0x8086, dev=0x283e, revid=0x04 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type Memory, range 32, base 0xdb505000, size 8, enabled map[20]: type I/O Port, range 32, base 0xefa0, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 20 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x7000-0x7fff pcib1: memory decode 0xd0000000-0xd30fffff pcib1: prefetched decode 0xc0000000-0xcfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x10de, dev=0x0407, revid=0xa1 domain=0, bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xd2000000, size 24, enabled pcib1: requested memory range 0xd2000000-0xd2ffffff: good map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type Memory, range 64, base 0xd0000000, size 25, enabled pcib1: requested memory range 0xd0000000-0xd1ffffff: good map[24]: type I/O Port, range 32, base 0x7000, size 7, enabled pcib1: requested I/O range 0x7000-0x707f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 vgapci0: <VGA-compatible display> port 0x7000-0x707f mem 0xd2000000-0xd2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x80c0-0x80df irq 20 at device 26.0 on pci0 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49 uhci0: [MPSAFE] uhci0: [ITHREAD] usbus0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0 uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x80a0-0x80bf irq 16 at device 26.1 on pci0 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 50 uhci1: [MPSAFE] uhci1: [ITHREAD] usbus1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1 ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xdb504c00-0xdb504fff irq 21 at device 26.7 on pci0 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0 pci0: <multimedia, HDA> at device 27.0 (no driver attached) pcib2: <PCI-PCI bridge> at device 28.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode pci2: <PCI bus> on pcib2 pci2: domain=0, physical bus=2 pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 10 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode pci3: <ACPI PCI bus> on pcib3 pci3: domain=0, physical bus=3 pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pcib4: domain 0 pcib4: secondary bus 11 pcib4: subordinate bus 11 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xd7300000-0xd73fffff pcib4: no prefetched decode pci11: <ACPI PCI bus> on pcib4 pci11: domain=0, physical bus=11 found-> vendor=0x14e4, dev=0x4328, revid=0x05 domain=0, bus=11, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd7300000, size 14, enabled pcib4: requested memory range 0xd7300000-0xd7303fff: good pcib4: matched entry for 11.0.INTA pcib4: slot 0 INTA hardwired to IRQ 16 pci11: <network> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pcib5: domain 0 pcib5: secondary bus 12 pcib5: subordinate bus 12 pcib5: I/O decode 0x5000-0x5fff pcib5: memory decode 0xd7200000-0xd72fffff pcib5: no prefetched decode pci12: <ACPI PCI bus> on pcib5 pci12: domain=0, physical bus=12 found-> vendor=0x11ab, dev=0x436a, revid=0x13 domain=0, bus=12, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=64 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=7 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xd7200000, size 14, enabled pcib5: requested memory range 0xd7200000-0xd7203fff: good map[18]: type I/O Port, range 32, base 0x5000, size 8, enabled pcib5: requested I/O range 0x5000-0x50ff: in range pcib5: matched entry for 12.0.INTA pcib5: slot 0 INTA hardwired to IRQ 17 mskc0: <Marvell Yukon 88E8058 Gigabit Ethernet> port 0x5000-0x50ff mem 0xd7200000-0xd7203fff irq 17 at device 0.0 on pci12 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd7200000 mskc0: MSI count : 1 mskc0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 52 mskc0: using IRQ 256 for MSI mskc0: RAM buffer size : 0KB msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:22:41:26:ec:4e miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow mskc0: [MPSAFE] mskc0: [ITHREAD] uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x8080-0x809f irq 16 at device 29.0 on pci0 uhci2: [MPSAFE] uhci2: [ITHREAD] usbus3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2 uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x8060-0x807f irq 18 at device 29.1 on pci0 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53 uhci3: [MPSAFE] uhci3: [ITHREAD] usbus4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3 uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x8040-0x805f irq 21 at device 29.2 on pci0 uhci4: [MPSAFE] uhci4: [ITHREAD] usbus5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4 ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xdb504800-0xdb504bff irq 20 at device 29.7 on pci0 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus6: EHCI version 1.0 usbus6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib6: domain 0 pcib6: secondary bus 13 pcib6: subordinate bus 13 pcib6: I/O decode 0xf000-0xfff pcib6: memory decode 0xd7100000-0xd71fffff pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci13: <ACPI PCI bus> on pcib6 pci13: domain=0, physical bus=13 found-> vendor=0x104c, dev=0x8025, revid=0x02 domain=0, bus=13, slot=3, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xd7104000, size 11, enabled pcib6: requested memory range 0xd7104000-0xd71047ff: good map[14]: type Memory, range 32, base 0xd7100000, size 14, enabled pcib6: requested memory range 0xd7100000-0xd7103fff: good fwohci0: <Texas Instruments TSB82AA2> mem 0xd7104000-0xd71047ff,0xd7100000-0xd7103fff at device 3.0 on pci13 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xd7104000 pcib6: matched entry for 13.3.INTA pcib6: slot 3 INTA hardwired to IRQ 19 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:22:41:ff:fe:45:e6:88 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x1a78000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:22:41:45:e6:88 fwe0: bpf attached fwe0: Ethernet address: 02:22:41:45:e6:88 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:22:41:ff:fe:45:e6:88 @ 0xfffe00000000, S800, maxrec 4096 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH8M UDMA100 controller> port 0x8108-0x810f,0x811c-0x811f,0x8100-0x8107,0x8118-0x811b,0x80e0-0x80ef irq 21 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x80e0 atapci0: [MPSAFE] atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8108 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x811c ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata2: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=00 stat1=00 devices=0x10000 ata2: [MPSAFE] ata2: [ITHREAD] atapci1: <Intel ICH8M SATA300 controller> port 0x80f8-0x80ff,0x8114-0x8117,0x80f0-0x80f7,0x8110-0x8113,0x8020-0x802f,0x4000-0x400f irq 18 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8020 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0x4000 ata3: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x80f8 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8114 ata3: reset tp1 mask=03 ostat0=50 ostat1=00 ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=50 stat1=00 devices=0x1 ata3: [MPSAFE] ata3: [ITHREAD] ata4: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x80f0 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8110 ata4: reset tp1 mask=03 ostat0=7f ostat1=7f ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff ata4: reset tp2 stat0=ff stat1=ff devices=0x0 ata4: [MPSAFE] ata4: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) battery0: <ACPI Control Method Battery> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock (resolution 1000000us) acpi0: wakeup code va 0xffffff81215fb000 pa 0x4000 ex_isa_identify() isa_probe_children: disabling PnP devices atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: unable to get the current command byte value. kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: current command byte:ffffffff psm0: unable to get the current command byte value. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 Device configuration finished. procfs registered lapic: Divisor 2, Frequency 99750896 Hz Timecounter "TSC" frequency 2394021384 Hz quality -100 Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached hptrr: no controller detected.firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me) firewire0: bus manager 0 fwohci0: phy int ata2: Identifying devices: 00010000 ata2: New devices: 00010000 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 480Mbps High Speed USB v2.0 ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=80 wire acpi_acad0: acline initialization startacd0: setting UDMA66 acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start acd0: <MATSHITADVD-R UJ-867/HA13> DVDR drive at ata2 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA66 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata3: Identifying devices: 00000001 ata3: New devices: 00000001 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad6: setting UDMA100 ad6: 190782MB <Hitachi HTS542520K9SA00 BBDAC3GP> at ata3-master UDMA100 ad6: 390721968 sectors [387621C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad6 battery0: battery initialization done, tried 1 times ad6: Intel check1 failed ad6: Adaptec check1 failed ad6: LSI (v3) check1 failed ad6: LSI (v2) check1 failed ad6: FreeBSD check1 failed ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 49 ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 50 msi: Assigning MSI IRQ 256 to local APIC 1 vector 51 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered Root mount waiting for: usbus6 usbus2 Root mount waiting for: usbus6 usbus2 uhub2: 4 ports with 4 removable, self powered uhub6: 6 ports with 6 removable, self powered Root mount waiting for: usbus6 usbus2 ugen6.2: <Apple Inc.> at usbus6 Root mount waiting for: usbus6 ugen0.2: <Apple Inc.> at usbus0 uhub7: <Apple Inc. BRCM2046 Hub, class 9/0, rev 2.00/1.00, addr 2> on usbus0 Trying to mount root from ufs:/dev/ad6p3 uhub7: 3 ports with 0 removable, self powered start_init: trying /sbin/init ugen5.2: <Apple Computer, Inc.> at usbus5 uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/0.16, addr 2> on usbus5 ugen0.3: <Apple Inc.> at usbus0 ugen0.4: <vendor 0x05ac> at usbus0 ukbd0: <vendor 0x05ac product 0x820a, class 0/0, rev 2.00/1.00, addr 4> on usbus0 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 ugen5.3: <Apple, Inc.> at usbus5 ukbd1: <Apple Internal Keyboard> on usbus5 kbd3 at ukbd1 kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000 uhid1: <Touchpad> on usbus5 ums0: <Touchpad> on usbus5 ums0: 3 buttons and [XY] coordinates ID=2 ugen0.5: <vendor 0x05ac> at usbus0 ums1: <vendor 0x05ac product 0x820b, class 0/0, rev 2.00/1.00, addr 5> on usbus0 ums1: 3 buttons and [XY] coordinates ID=2 ugen0.6: <vendor 0x0e6a> at usbus0 ukbd2: <HID Keyboard Device> on usbus0 kbd: new array size 8 kbd4 at ukbd2 kbd4: ukbd2, generic (0), config:0x0, flags:0x3d0000 uhid2: <HID Keyboard Hot Keys> on usbus0 msk0: link state changed to UP
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTi=Hk6TtWzh_zAOJuXmK7=QT1oR3aGB7XpWr3GiG>