Date: Wed, 15 Jun 2005 14:19:23 -0400 From: Richard Bates <bates@telehouse.com> To: freebsd-firewire@freebsd.org Subject: new at firewire on FreeBSD Message-ID: <260ffd90fc8ee9a68f14e60c78402ede@telehouse.com>
next in thread | raw e-mail | index | archive | help
I have purchased a iogear usb2.0/Firewire combo card Modcel GUF320
(marked as supported on the freebsd web site)
I am using a dell poweredge 2450 (17GB internal scsi disk)
installed FreeBSD 5.4
Installed the card.
attached a 250GB external hard disk
created directory /mnt/firewire
I tried
mount /dev/da1 /mnt/firewire
mount /dev/firewire0 /mnt/firewire
what am I missing?
Thank you for your help
system info shows below...
> dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <DELL PE2450 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (728.44-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134209536 (127 MB)
avail memory = 121688064 (116 MB)
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 2
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE2450> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xfe004000-0xfe004fff irq 23 at device 8.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xfe003000-0xfe003fff irq 23 at device 8.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xfe002000-0xfe002fff irq 23 at device 8.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 8.3 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem
0xfe005000-0xfe0057ff irq 22 at device 8.4 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:e6:39:00:00:03:46
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:e6:00:03:46
fwe0: Ethernet address: 02:90:e6:00:03:46
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci0: <display, VGA> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port
0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci3: <OHCI (generic) USB controller> mem 0xfe000000-0xfe000fff irq 5
at device 15.2 on pci0
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci1
pci2: <ACPI PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem
0xf8fff000-0xf8ffffff irq 31 at device 4.0 on pci2
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem
0xf8ffe000-0xf8ffefff irq 30 at device 4.1 on pci2
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xccc0-0xccff mem
0xfa000000-0xfa0fffff,0xfa100000-0xfa100fff irq 16 at device 8.0 on
pci1
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:b0:d0:b0:3f:da
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on
acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xc8000-0xcdfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounter "TSC" frequency 728442016 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <SAMSUNG CD-ROM SN-124/q008> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
ses0 at ahc0 bus 0 target 6 lun 0
ses0: <DELL 1x4 U2W SCSI BP 1.16> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM ATLAS10K2-TY184J DA40> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0: 17366MB (35566478 512 byte sectors: 255H 63S/T 2213C)
Mounting root from ufs:/dev/da0s1a
>
log shows
Jun 15 13:07:30 dns2 kernel: fwohci0: BUS reset
Jun 15 13:07:30 dns2 kernel: fwohci0: node_id=0x8800ffc0, gen=2, non
CYCLEMASTER mode
Jun 15 13:07:30 dns2 kernel: firewire0: 3 nodes, maxhop <= 2, cable IRM
= 0 (me)
Jun 15 13:07:30 dns2 kernel: firewire0: root node is not cycle master
capable
Jun 15 13:07:30 dns2 kernel: firewire0: bus manager 0 (me)
Jun 15 13:07:30 dns2 kernel: firewire0: New S400 device
ID:00d0010100006be2
Jun 15 13:07:35 dns2 kernel: sbp0:0:0 Request aborted
Jun 15 13:07:35 dns2 last message repeated 2 times
Jun 15 13:07:35 dns2 kernel: da1 at sbp0 bus 0 target 0 lun 0
Jun 15 13:07:35 dns2 kernel: da1: <VST TECH VST THIN FIREWIR b838>
Fixed Direct Access SCSI-0 device
Jun 15 13:07:35 dns2 kernel: da1: 50.000MB/s transfers, Tagged Queueing
Enabled
Jun 15 13:07:35 dns2 kernel: da1: 28615MB (58605120 512 byte sectors:
255H 63S/T 3648C)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?260ffd90fc8ee9a68f14e60c78402ede>