Date: Mon, 16 Apr 2007 20:18:53 +0000 From: "Mr CW" <mrcomputerwiz@hotmail.com> To: freebsd-hardware@freebsd.org Subject: SIIG PCI to Dual Serial, JJ-P20212 Message-ID: <BAY127-F22CEE2D00C11D2C260F935B3520@phx.gbl>
next in thread | raw e-mail | index | archive | help
Hi Folks, I purchased a SIIG Dual Serial (RS-232) (Part Number JJ-P20212) card to control a remote power switch now attached to a FreeBSD 4.11 system. (The SIIG Dual Serial PCI cards are in the list of approved hardware for 4.11.) Since the system is a production system and is running some very important legacy applications, I cannot take it down to upgrade to 6.1, so I am stuck at 4.11 for right now. My problem is as follows: I have installed the card, and added 'device puc' to the kernel & reinstalled the kernel. Here is what dmesg says: ---------- puc0: <Oxford Semiconductor OX16PCI954 UARTs> port 0xac00-0xac1f,0xa800-0xa81f mem 0xee032000-0xee032fff,0xee031000-0xee031fff irq 11 at device 8.0 on pci0 sio2: type 16550A sio3: type 16550A sio4: configured irq 11 not in bitmap of probed irqs 0 sio4: type 16550A sio5: configured irq 11 not in bitmap of probed irqs 0 sio5: type 16550A [snip] sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A ---------- >From what this tells me, the dual PCI card is now sio2 and sio3. sio0 is the built-in "COM1" port, and is attached to the service modem. It works fine. If I disconnect the service modem from sio0 and attach it to sio2 or sio3, tip reports that I am connected, the modem Terminal Ready light comes on, but typing "ATD" does not cause the modem to go off hook. Exiting tip causes the TR light to go out. Both ports are set up to 9600 baud in /etc/remote and are being addressed as /dev/cuaa0 and /dev/cuaa2. Both ports show the same configuration in stty. I have read another thread sent to FreeBSD hardware but that one did not resolve the problem (the person asking the question simply went back to using sio0 instead of getting the card to work). If there is anything I can post to clarify the system configuration, please let me know. Any help will be _greatly_ appreciated. Jake _________________________________________________________________ Get a FREE Web site, company branded e-mail and more from Microsoft Office Live! http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY127-F22CEE2D00C11D2C260F935B3520>