Date: Sat, 24 Jan 2009 16:49:10 +0100 From: Oliver Pinter <oliver.pntr@gmail.com> To: Scott Gasch <scott.gasch@gmail.com> Cc: freebsd-current@freebsd.org, freebsd-amd64@freebsd.org Subject: Re: Problems with ata driver on current / Asus P5Q-E Message-ID: <6101e8c40901240749h106916adya7d6a8caee4ed155@mail.gmail.com> In-Reply-To: <a174d0600901232228k5e65948ft60179cfbeba24a04@mail.gmail.com> References: <a174d0600901232228k5e65948ft60179cfbeba24a04@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--001636417647505c1504613c7279 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit I have the same MB, and it running perfect, but I have only 3 SATA HDD + 1 SATA DVD-RW The ICH is in RAID mode. Attached my conf and dmesg Which version of BIOS use You? [snip] Southbridge - 6 x SATA 3Gb/s - Intel(R) Matrix Storage Technology with RAID 0, 1, 5, 10 support Marvell 88SE6121 - 1 x UltraDMA 133/100/66 for up to 2 PATA devices - 1 x External SATA 3Gb/s port (SATA On-the-Go) Silicon Image Sil5723 (Drive Xpert technology) - 2 x SATA 3Gb/s - Supports EZ Backup and Super Speed functions [snip] http://www.asus.com/products.aspx?l1=3&l2=11&l3=709&l4=0&model=2267&modelmenu=2 /* sorry for bad english */ On 1/24/09, Scott Gasch <scott.gasch@gmail.com> wrote: > Hi, > I've been running a 7.1-p1 (amd64) system and and seeing very high interrupt > rates on irq19 which is shared between several devices. Over 60% of one > core is used responding to interrupts. The machine also hangs frequently. > irq19 is shared by atapci1, atapci2, fwohci0 and uhci4... > the consensus response to my last question was that "it's probably the ata > driver". > > Today I tried building and booting a GENERIC current kernel and got another > piece of information. The freebsd-current GENERIC kernel does not boot; > shortly after probing the drives it says "Cannot setup DMA" several times on > the console and hangs. > > This machine is an Asus P5Q-E... I believe it has two ATA controllers: > a Marvell > 88SE6121 and a Silicon Image SIL5723. Is one of these chipsets generating > interrupts that the driver doesn't understand and/or properly dismiss? Can > it be put into a legacy mode that works? This machine has problems in 7.0, > 7.1 and current... I'm running out of ideas. > > Thx, > Scott > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" > --001636417647505c1504613c7279--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6101e8c40901240749h106916adya7d6a8caee4ed155>