Date: Fri, 23 Nov 2012 03:24:53 +0000 (UTC) From: Oleksandr Tymoshenko <gonzo@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r243420 - head/sys/boot/fdt/dts Message-ID: <201211230324.qAN3OreT026757@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: gonzo Date: Fri Nov 23 03:24:52 2012 New Revision: 243420 URL: http://svnweb.freebsd.org/changeset/base/243420 Log: Make FDT blob compatible with Raspberry Pi firmware. Rasperry Pi firmware has a set of hardcoded pathes it uses to fill FDT with system-specific information like display resolution, memory size, UART and SDHCI clocks, ethernet MAC address. Handle two of them: - Add placeholder for ethernet MAC address - Move display node out of "axi" node Modified: head/sys/boot/fdt/dts/bcm2835-rpi-b.dts Modified: head/sys/boot/fdt/dts/bcm2835-rpi-b.dts ============================================================================== --- head/sys/boot/fdt/dts/bcm2835-rpi-b.dts Fri Nov 23 01:48:31 2012 (r243419) +++ head/sys/boot/fdt/dts/bcm2835-rpi-b.dts Fri Nov 23 03:24:52 2012 (r243420) @@ -478,26 +478,37 @@ interrupt-parent = <&intc>; #address-cells = <1>; #size-cells = <0>; + hub { + compatible = "usb,hub", "usb,device"; + reg = <0x00000001>; + #address-cells = <1>; + #size-cells = <0>; + ethernet { + compatible = "net,ethernet", "usb,device"; + reg = <0x00000001>; + mac-address = [00 00 00 00 00 00]; + }; + }; }; - display { - compatible = "broadcom,bcm2835-fb", "broadcom,bcm2708-fb"; - - broadcom,vc-mailbox = <&vc_mbox>; - broadcom,vc-channel = <1>; - - broadcom,width = <0>; /* Set by VideoCore */ - broadcom,height = <0>; /* Set by VideoCore */ - broadcom,depth = <0>; /* Set by VideoCore */ - }; }; - memory { device_type = "memory"; reg = <0 0x08000000>; /* 128MB */ }; + display { + compatible = "broadcom,bcm2835-fb", "broadcom,bcm2708-fb"; + + broadcom,vc-mailbox = <&vc_mbox>; + broadcom,vc-channel = <1>; + + broadcom,width = <0>; /* Set by VideoCore */ + broadcom,height = <0>; /* Set by VideoCore */ + broadcom,depth = <0>; /* Set by VideoCore */ + }; + leds { compatible = "gpio-leds";
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201211230324.qAN3OreT026757>