Date: Wed, 07 Apr 1999 09:54:49 +0100 From: David Malone <dwmalone@maths.tcd.ie> To: Greg Lehey <grog@lemis.com> Cc: freebsd-current@freebsd.org Subject: Re: New SiS 5591 ide chipset support. Message-ID: <9904070954.aa22814@salmon.maths.tcd.ie> In-Reply-To: Your message of "Wed, 07 Apr 1999 10:43:50 %2B0930." <19990407104350.S2142@lemis.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> > The first thing is that I guess the <no_dam> should be <no_dma>, > > My understanding is that it stands for "no damage". OK - I just thought it might have been a typo. > > Backing out the last change to ide_pci.c seems to fix the problem. > > I've lots of flags turned on in the kernel config file (0xa0ffa0ff), > > the old kernel complains a little but works fine, the new kernel > > spots that it is a SiS 5591, but grinds to a halt. > > Interesting. What motherboard do you have? Does it also have a 5595 > on board? Its quite a cheap and nasty thing, but it works. I'll have a look when I get home and check. > One way or another it's a problem with the new chipset support if it > makes a previously working system no longer work. > ide_pci0: <SiS 5591 Bus-master IDE Controller> rev 0xd0 int a irq 14 on pci0.0 > chip1: <SiS 85c503> rev 0x01 on pci0.1.0 > chip2: <PCI to PCI bridge (vendor=1039 device=0001)> rev 0x00 on pci0.2.0 > > Do you have the other chip reports as well? I'll have to check again when I get home. > OK. Can I assume that you have only one drive on the machine? Have > you tried a smaller DMA transfer size (say, to start with, > 0xa001a001)? I actually have three drives and a cdrom on the two IDE busses, but it only seems to complain about the first one - I don't know if that is because it is the first one it tries to access or becauser the others work OK. I didn't take down the details of the other drives 'cos it takes ages to copy the stuff down. I did notice that it programed wd1 with transfer mode 22. Maybe I should try to take wd0 out of fstab and see if it works OK with wd1. I'll try it with a lower DMA transfer size too. David. David. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi? <9904070954.aa22814>