Date: Tue, 14 Oct 2025 05:32:47 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: cperciva@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-stable-15-amd64-test - Build #66 - Still Failing Message-ID: <907106355.1267.1760419967315@jenkins.ci.freebsd.org> In-Reply-To: <851938136.1243.1760413715169@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-stable-15-amd64-test - Build #66 (e9010214e9bebbe6155c9f720551008a785b692c) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/66/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/66/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/66/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) e9010214e9bebbe6155c9f720551008a785b692c by cperciva: EC2: Fix additional files on small+builder AMIs The end of the build log: [...truncated 4.33 MiB...] epair0b: Ethernet address: e2:39:c8:e0:96:43 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 76:2c:b9:67:4b:0b epair1b: Ethernet address: 1a:43:9e:57:7d:70 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.155s] sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: 6a:67:fa:47:7e:b0 epair0b: Ethernet address: f6:05:5b:43:73:cf epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 1e:cf:fa:20:fd:96 epair1b: Ethernet address: 2a:30:ba:98:a4:c5 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.155s] sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 32:dd:4e:73:b1:f0 epair0b: Ethernet address: 1a:fa:98:23:d9:7e epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 4e:3c:ac:f9:a6:0e epair1b: Ethernet address: 12:68:bc:ac:75:a1 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.136s] sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: 52:0f:79:71:a5:f3 epair0b: Ethernet address: 2e:bd:f6:76:e5:ed epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: b2:64:14:a7:7a:49 epair1b: Ethernet address: 82:04:54:f3:db:ea epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.136s] sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: c2:46:dc:8e:cd:ba epair0b: Ethernet address: c6:8b:18:37:26:e2 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 9a:6f:08:da:27:55 epair1b: Ethernet address: 6e:51:15:a3:cb:5e epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.134s] sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: 56:ff:71:3e:31:2c epair0b: Ethernet address: aa:85:3c:f3:0c:af epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 6a:9a:7c:d9:e6:7d epair1b: Ethernet address: 1a:83:04:d6:25:8f epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.146s] sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: aa:41:26:7a:46:7f epair0b: Ethernet address: e6:eb:c5:67:02:ae epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: d2:3c:e2:76:93:3e epair1b: Ethernet address: 06:63:23:ec:c5:1b epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.162s] sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: a6:83:af:f4:d3:a3 epair0b: Ethernet address: 42:ab:49:12:56:27 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 8a:d8:80:94:be:d2 epair1b: Ethernet address: 92:62:ab:b2:1f:d2 epair1a: link state changed to UP epair1b: link state changed to UP epair1b: link state changed to DOWN epair1a: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.145s] sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 3e:91:84:0d:6d:fc epair0b: Ethernet address: c6:0e:a8:43:64:2a epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 2e:f6:89:c5:f7:65 epair1b: Ethernet address: 8e:03:2e:ae:14:5f epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: be:61:c6:7c:de:82 epair2b: Ethernet address: d2:a7:80:35:40:e9 epair2a: link state changed to UP epair2b: link state changed to UP epair2b: link state changed to DOWN epair2a: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN epair0a: link state changed to DOWN epair0b: link state changed to DOWN failed: atf-check failed; see the output of the test for details [0.204s] sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: 56:60:ab:6f:b7:1d epair0b: Ethernet address: 0a:a0:4c:72:3a:50 epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 76:8e:ca:5b:7e:48 epair1b: Ethernet address: be:99:3d:e4:28:16 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: a6:76:c8:6e:47:df epair2b: Ethernet address: ce:2a:89:a4:fb:be epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled lo0: promiscuous mode disabled epair0a: link state changed to DOWN epair0b: link state changed to DOWN epair2a: link state changed to DOWN epair2b: link state changed to DOWN epair1a: link state changed to DOWN epair1b: link state changed to DOWN failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [4.722s] sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 4e:7a:37:1d:8e:f1 epair0b: Ethernet address: b2:c1:b7:7f:7d:1a epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: ae:33:34:bb:73:79 epair1b: Ethernet address: aa:53:c5:00:89:83 epair1a: link state changed to UP epair1b: link state changed to UP epair2a: Ethernet address: 8e:6e:a9:d6:3f:d2 epair2b: Ethernet address: 72:b0:d4:4b:3a:75 epair2a: link state changed to UP epair2b: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: link state changed to UP lo0: promiscuous mode enabled Fatal trap 12: page fault while in kernel mode cpuid = 1; apic id = 01 fault virtual address = 0x18 fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80c0f0e2 stack pointer = 0x28:0xfffffe008aef2980 frame pointer = 0x28:0xfffffe008aef29c0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 12 (swi1: netisr 0) rdi: fffffe008aef29d8 rsi: fffff8014383f196 rdx: 00000000ffffffff rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003 rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0 r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000 r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5 trap number = 12 panic: page fault cpuid = 1 time = 1760419950 KDB: stack backtrace: #0 0xffffffff80bc02ed at kdb_backtrace+0x5d #1 0xffffffff80b736d6 at vpanic+0x136 #2 0xffffffff80b73593 at panic+0x43 #3 0xffffffff8107bf69 at trap_pfault+0x3c9 #4 0xffffffff81051d78 at calltrap+0x8 #5 0xffffffff80d84aa9 at in6_cksum_partial_l2+0x109 #6 0xffffffff8295cab5 at fr_cksum+0xa5 #7 0xffffffff829621dd at ipf_checkl4sum+0xbd #8 0xffffffff829586f6 at ipf_checkv6sum+0x56 #9 0xffffffff8295a601 at ipf_makefrip+0x1691 #10 0xffffffff8295b6de at ipf_check+0x15e #11 0xffffffff82958c28 at ipf_check_wrapper6+0x58 #12 0xffffffff80cc33e8 at pfil_mbuf_in+0x38 #13 0xffffffff80d92b24 at ip6_input+0x484 #14 0xffffffff80cc0c48 at swi_net+0x128 #15 0xffffffff80b2d309 at ithread_loop+0x239 #16 0xffffffff80b2989b at fork_exit+0x7b #17 0xffffffff81052d9e at fork_trampoline+0xe Uptime: 1h36m17s Automatic reboot in 15 seconds - press a key on the console to abort + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-66' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-zfs-tests.sh x ./disable-notyet-tests.sh x ./auto-shutdown x ./run-kyua.sh x ./run.sh x ./disable-dtrace-tests.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins1645946027516330181.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': 'e9010214e9bebbe6155c9f720551008a785b692c', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: stable-15/latest_tested/amd64/amd64 -> ../../e9010214e9bebbe6155c9f720551008a785b692c/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?907106355.1267.1760419967315>