Date: Mon, 3 Apr 2000 10:03:47 -0500 (CDT) From: stephen@math.missouri.edu To: FreeBSD-gnats-submit@freebsd.org Subject: kern/17774: stray irq7 Message-ID: <200004031503.KAA01729@cauchy.math.missouri.edu>
next in thread | raw e-mail | index | archive | help
>Number: 17774
>Category: kern
>Synopsis: stray irq7
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Apr 3 08:10:01 PDT 2000
>Closed-Date:
>Last-Modified:
>Originator: Stephen Montgomery-Smith
>Release: FreeBSD 4.0-STABLE i386
>Organization:
University of Missouri
>Environment:
>Description:
With FreeBSD 4.0, when I print, I get stray irq7 error messages.
This does not effect actual printing, so it is harmless.
Here are the settings in my kernel config file, and also
dmesg.
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #2: Fri Mar 31 13:40:45 CST 2000
root@xxxxxxxxxxxxxxxxxxxxxx:/usr/src/sys/compile/XXXX
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 232671179 Hz
CPU: Pentium/P55C (232.67-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 33554432 (32768K bytes)
avail memory = 29929472 (29228K bytes)
Preloaded elf kernel "kernel" at 0xc02d8000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <NVidia Riva TNT graphics accelerator> at 8.0 irq 11
pcm0: <AudioPCI ES1370> port 0x6000-0x603f irq 10 at device 10.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0x6100-0x61ff mem 0xe2000000-0xe20000ff
irq 9 at device 11.0 on pci0
rl0: Ethernet address: xxxxxxxxxxxxxxxxxxx
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: supplying EUI64: xxxxxxxxxxxxxxxxxxx
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard LaserJet 4L> HP ENHANCED PCL5,PJL
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
joy0 at port 0x201 on isa0
ad0: 1623MB <FUJITSU M1623TAU> [3298/16/63] at ata0-master using WDMA2
ad1: 8063MB <WDC AC28400R> [16383/16/63] at ata0-slave using WDMA2
afd0: 120MB <LS-120 COSM 05 UHD Floppy> [963/8/32] at ata1-master using PIO2
acd0: CDROM <GCD-R580B> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s2a
rl0: starting DAD for xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
rl0: DAD complete for xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx - no duplicates found
stray irq 7
stray irq 7
stray irq 7
stray irq 7
stray irq 7
too many stray irq 7's; not logging any more
>How-To-Repeat:
Just print something.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Stephen Montgomery-Smith
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004031503.KAA01729>