Date: Sun, 30 Dec 2007 16:42:56 -0300 (ART) From: Wildes Miranda <gowmo@yahoo.com.br> To: "Andrey V. Elsukov" <bu7cher@yandex.ru> Cc: freebsd-current@freebsd.org Subject: Re: ATI SB600/700/800 tester wanted Message-ID: <474808.60103.qm@web33608.mail.mud.yahoo.com> In-Reply-To: <4775D728.3090607@yandex.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
--- "Andrey V. Elsukov" <bu7cher@yandex.ru> escreveu:
> Wildes Miranda wrote:
> > Ok, thanks. I'll do it. But , Xin Li announces
> this
> > patch around Nov 06, 2007, why it's is too old ?
>
> There was a lot of fixes and changes.
> And now it mostly doesn't needed. Do you have some
> troubles?
>
> --
> WBR, Andrey V. Elsukov
>
I hope that you understand my English. :=)
Yes, i think. I haven't the option to set AHCI on the
BIOS as you suggested, and my trouble is that sata
disk just operate on UDMA33 mode.
i wish to use this box for java development, with many
disk access on compilation process and tomcat
environment. I think that this box will be more fast
with max mode allowed by disk controller.
is attached pciconf,dmesg.
thanks.
Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento!
http://br.mail.yahoo.com/
[-- Attachment #2 --]
hostb0@pci0:0:0:0: class=0x060000 card=0x022a1028 chip=0x59501002 rev=0x10 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RS480 Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x5a3f1002 chip=0x5a3f1002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'RS480 PCI Bridge'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:5:0: class=0x060400 card=0x59501002 chip=0x5a371002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'RS480 PCI Bridge'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:6:0: class=0x060400 card=0x59501002 chip=0x5a381002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'RS480 PCI Bridge'
class = bridge
subclass = PCI-PCI
atapci0@pci0:0:18:0: class=0x01018f card=0x022a1028 chip=0x43801002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 Serial ATA Controller'
class = mass storage
subclass = ATA
ohci0@pci0:0:19:0: class=0x0c0310 card=0x022a1028 chip=0x43871002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 USB Controller (OHCI0)'
class = serial bus
subclass = USB
ohci1@pci0:0:19:1: class=0x0c0310 card=0x022a1028 chip=0x43881002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 USB Controller (OHCI1)'
class = serial bus
subclass = USB
ohci2@pci0:0:19:2: class=0x0c0310 card=0x022a1028 chip=0x43891002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 USB Controller (OHCI2)'
class = serial bus
subclass = USB
ohci3@pci0:0:19:3: class=0x0c0310 card=0x022a1028 chip=0x438a1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 USB Controller (OHCI3)'
class = serial bus
subclass = USB
ohci4@pci0:0:19:4: class=0x0c0310 card=0x022a1028 chip=0x438b1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 USB Controller (OHCI4)'
class = serial bus
subclass = USB
ehci0@pci0:0:19:5: class=0x0c0320 card=0x022a1028 chip=0x43861002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 USB Controller (EHCI)'
class = serial bus
subclass = USB
none0@pci0:0:20:0: class=0x0c0500 card=0x022a1028 chip=0x43851002 rev=0x14 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 SMBUS Controller'
class = serial bus
subclass = SMBus
atapci1@pci0:0:20:1: class=0x01018a card=0x022a1028 chip=0x438c1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 ATA Controller'
class = mass storage
subclass = ATA
pcm0@pci0:0:20:2: class=0x040300 card=0x022a1028 chip=0x43831002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 High Definition Audio Controller'
class = multimedia
isab0@pci0:0:20:3: class=0x060100 card=0x022a1028 chip=0x438d1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 PCI to LPC Bridge'
class = bridge
subclass = PCI-ISA
pcib4@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'IXP SB600 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron Address Map'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(K8) Athlon 64/Opteron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:1:5:0: class=0x030000 card=0x022a1028 chip=0x59751002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'Radeon XPRESS 200M SERIES'
class = display
subclass = VGA
none1@pci0:5:0:0: class=0x028000 card=0x00071028 chip=0x431114e4 rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'Dell Wireless 1390 WLAN Mini-PCI Card'
class = network
bfe0@pci0:8:0:0: class=0x020000 card=0x022a1028 chip=0x170c14e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4401 Broadcom NetLink 4401 10/100 Ethernet NIC'
class = network
subclass = ethernet
none2@pci0:8:1:0: class=0x080500 card=0x022a1028 chip=0x08221180 rev=0x19 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
device = 'R5C832, R5C843 SDA Standard Compliant SD Host Controller'
class = base peripheral
none3@pci0:8:1:1: class=0x088000 card=0x022a1028 chip=0x08431180 rev=0x01 hdr=0x00
vendor = 'Ricoh Company, Ltd.'
device = 'unknown Ricoh MMC Host Controller'
class = base peripheral
[-- Attachment #3 --]
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-PRERELEASE #3: Thu Dec 27 14:09:40 BRST 2007
gowmo@irod.itecgyn.com.br:/usr/obj/usr/src/sys/IROD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
usable memory = 1466945536 (1398 MB)
avail memory = 1414811648 (1349 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <DELL M08 > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 0, 1000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pci5: <network> at device 0.0 (no driver attached)
atapci0: <ATI ATA controller> port 0x8438-0x843f,0x8454-0x8457,0x8430-0x8437,0x8450-0x8453,0x8400-0x840f mem 0xc0004000-0xc00043ff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xc0005000-0xc0005fff irq 16 at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xc0006000-0xc0006fff irq 17 at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xc0007000-0xc0007fff irq 18 at device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xc0008000-0xc0008fff irq 17 at device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xc0009000-0xc0009fff irq 18 at device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0004400-0xc00044ff irq 19 at device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pcm0: <ATI SB600 High Definition Audio Controller> mem 0xc0000000-0xc0003fff irq 16 at device 20.2 on pci0
pcm0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci8: <ACPI PCI bus> on pcib4
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xc0300000-0xc0301fff irq 21 at device 0.0 on pci8
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: using obsoleted if_watchdog interface
bfe0: Ethernet address: 00:1c:23:8a:02:fb
bfe0: [ITHREAD]
pci8: <base peripheral> at device 1.0 (no driver attached)
pci8: <base peripheral> at device 1.1 (no driver attached)
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad4: 76319MB <Seagate ST980811AS 3.CDD> at ata2-master UDMA33
pcm0: <HDA Codec: Sigmatel STAC9220>
pcm0: <HDA Driver Revision: 20071129_0050>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
[-- Attachment #4 --]
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-PRERELEASE #3: Thu Dec 27 14:09:40 BRST 2007
gowmo@irod.itecgyn.com.br:/usr/obj/usr/src/sys/IROD
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8070d000.
Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff8070d1f8.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff8070d7a0.
Preloaded elf obj module "/boot/kernel/ums.ko" at 0xffffffff8070ddc8.
Preloaded elf obj module "/boot/kernel/usb.ko" at 0xffffffff8070e270.
Preloaded elf obj module "/boot/kernel/radeon.ko" at 0xffffffff8070e898.
Preloaded elf obj module "/boot/kernel/drm.ko" at 0xffffffff8070edc0.
Preloaded elf obj module "/boot/kernel/agp.ko" at 0xffffffff8070f368.
Calibrating clock(s) ... i8254 clock: 1193208 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1596011098 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x40f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 1466945536 (1398 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x000000000080c000 - 0x00000000554f0fff, 1422807040 bytes (347365 pages)
avail memory = 1414811648 (1349 MB)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf8500/0x0014 (v 0 PTLTD )
ACPI: RSDT @ 0x0x57e7957b/0x0040 (v 1 DELL M08 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0x57e7fb9a/0x0074 (v 1 ATI Bowfin 0x06040000 ATI 0x000F4240)
ACPI: DSDT @ 0x0x57e795bb/0x65DF (v 1 ATI SB600 0x06040000 MSFT 0x03000000)
ACPI: FACS @ 0x0x57e90fc0/0x0040
ACPI: TCPA @ 0x0x57e7fc0e/0x0032 (v 2 AMD 0x06040000 PTEC 0x00000000)
ACPI: SSDT @ 0x0x57e7fc40/0x0182 (v 1 PTLTD POWERNOW 0x06040000 LTP 0x00000001)
ACPI: APIC @ 0x0x57e7fdc2/0x0054 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: MCFG @ 0x0x57e7fe16/0x003C (v 1 PTLTD MCFG 0x06040000 LTP 0x00000000)
ACPI: HPET @ 0x0x57e7fe52/0x0038 (v 1 PTLTD HPETTBL 0x06040000 LTP 0x00000001)
ACPI: SLIC @ 0x0x57e7fe8a/0x0176 (v 1 DELL M08 0x06040000 LTP 0x00000000)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
acpi0: <DELL M08 > on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SATX -> bus 0 dev 18 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SAT2.SATX -> bus 0 dev 17 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.IDE_.IDE_ -> bus 0 dev 20 func 1
unknown: I/O range not supported
AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB_.Z00A -> bus 0 dev 20 func 0
acpi0: reservation of 0, 1000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x14> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7
Validation 0 255 N 0 3 4 5 7
After Disable 0 255 N 0 3 4 5 7
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 4 hz: 14318180 opts: leg_route
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x8010
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x5950, revid=0x10
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x3220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x5a3f, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x5a37, revid=0x00
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x5a38, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x4380, revid=0x00
domain=0, bus=0, slot=18, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0a30, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x8438, size 3, enabled
map[14]: type I/O Port, range 32, base 0x8454, size 2, enabled
map[18]: type I/O Port, range 32, base 0x8430, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x8450, size 2, enabled
map[20]: type I/O Port, range 32, base 0x8400, size 4, enabled
map[24]: type Memory, range 32, base 0xc0004000, size 10, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x4387, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xc0005000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4388, revid=0x00
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type Memory, range 32, base 0xc0006000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4389, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[10]: type Memory, range 32, base 0xc0007000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 18
found-> vendor=0x1002, dev=0x438a, revid=0x00
domain=0, bus=0, slot=19, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[10]: type Memory, range 32, base 0xc0008000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x438b, revid=0x00
domain=0, bus=0, slot=19, func=4
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02a0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[10]: type Memory, range 32, base 0xc0009000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4386, revid=0x00
domain=0, bus=0, slot=19, func=5
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0004400, size 8, enabled
pcib0: matched entry for 0.19.INTD
pcib0: slot 19 INTD hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4385, revid=0x14
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x8410, size 4, enabled
map[14]: type Memory, range 32, base 0xfed00000, size 10, enabled
found-> vendor=0x1002, dev=0x438c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0015, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0x8420, size 4, enabled
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xc0000000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x438d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xc0100000-0xc01fffff
pcib1: prefetched decode 0xc8000000-0xcfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x5975, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Prefetchable Memory, range 32, base 0xc8000000, size 27, enabled
pcib1: requested memory range 0xc8000000-0xcfffffff: good
map[14]: type I/O Port, range 32, base 0x9000, size 8, enabled
pcib1: requested I/O range 0x9000-0x90ff: in range
map[18]: type Memory, range 32, base 0xc0100000, size 16, enabled
pcib1: requested memory range 0xc0100000-0xc010ffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 17
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 4
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib3: domain 0
pcib3: secondary bus 5
pcib3: subordinate bus 7
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xc0200000-0xc02fffff
pcib3: no prefetched decode
pci5: <ACPI PCI bus> on pcib3
pci5: domain=0, physical bus=5
found-> vendor=0x14e4, dev=0x4311, revid=0x01
domain=0, bus=5, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xc0200000, size 14, enabled
pcib3: requested memory range 0xc0200000-0xc0203fff: good
pcib3: matched entry for 5.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
pci5: <network> at device 0.0 (no driver attached)
atapci0: <ATI ATA controller> port 0x8438-0x843f,0x8454-0x8457,0x8430-0x8437,0x8450-0x8453,0x8400-0x840f mem 0xc0004000-0xc00043ff irq 22 at device 18.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8400
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x8438
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x8454
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x8430
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0x8450
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xc0005000-0xc0005fff irq 16 at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0005000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 50
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xc0006000-0xc0006fff irq 17 at device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0006000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xc0007000-0xc0007fff irq 18 at device 19.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0007000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xc0008000-0xc0008fff irq 17 at device 19.3 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0008000
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xc0009000-0xc0009fff irq 18 at device 19.4 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0009000
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0004400-0xc00044ff irq 19 at device 19.5 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xc0004400
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8420
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
pcm0: <ATI SB600 High Definition Audio Controller> mem 0xc0000000-0xc0003fff irq 16 at device 20.2 on pci0
pcm0: DMA Coherency: Uncacheable / vendor=0x1002
pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xc0000000
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: hdac_dma_alloc: size=1024 -> roundsz=1024
pcm0: hdac_dma_alloc: size=2048 -> roundsz=2048
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4: domain 0
pcib4: secondary bus 8
pcib4: subordinate bus 10
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xc0300000-0xc03fffff
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
pci8: <ACPI PCI bus> on pcib4
pci8: domain=0, physical bus=8
found-> vendor=0x14e4, dev=0x170c, revid=0x02
domain=0, bus=8, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0300000, size 13, enabled
pcib4: requested memory range 0xc0300000-0xc0301fff: good
pcib4: matched entry for 8.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 21
found-> vendor=0x1180, dev=0x0822, revid=0x19
domain=0, bus=8, slot=1, func=0
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0302000, size 8, enabled
pcib4: requested memory range 0xc0302000-0xc03020ff: good
pcib4: matched entry for 8.1.INTB
pcib4: slot 1 INTB hardwired to IRQ 20
found-> vendor=0x1180, dev=0x0843, revid=0x01
domain=0, bus=8, slot=1, func=1
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc0302400, size 8, enabled
pcib4: requested memory range 0xc0302400-0xc03024ff: good
pcib4: matched entry for 8.1.INTB
pcib4: slot 1 INTB hardwired to IRQ 20
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xc0300000-0xc0301fff irq 21 at device 0.0 on pci8
bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xc0300000
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> PHY 1 on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: using obsoleted if_watchdog interface
bfe0: bpf attached
bfe0: Ethernet address: 00:1c:23:8a:02:fb
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 55
bfe0: [MPSAFE]
bfe0: [ITHREAD]
pci8: <base peripheral> at device 1.0 (no driver attached)
pci8: <base peripheral> at device 1.1 (no driver attached)
acpi_button1: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcdfff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99750697 hz
Timecounter "TSC" frequency 1596011098 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 76319MB <Seagate ST980811AS 3.CDD> at ata2-master UDMA33
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
pcm0: HDA_DEBUG: HDA Config: on=0x00000000 off=0x00000000
pcm0: HDA_DEBUG: Starting CORB Engine...
pcm0: HDA_DEBUG: Starting RIRB Engine...
pcm0: HDA_DEBUG: Enabling controller interrupt...
pcm0: HDA_DEBUG: Scanning HDA codecs [start index=0] ...
pcm0: HDA_DEBUG: Probing codec: 0
pcm0: HDA_DEBUG: startnode=2 endnode=3
pcm0: HDA_DEBUG: AFG not found
pcm0: HDA_DEBUG: Probing codec: 1
pcm0: HDA_DEBUG: startnode=1 endnode=2
pcm0: HDA_DEBUG: Found AFG nid=1 [startnode=1 endnode=2]
pcm0: HDA_DEBUG: Parsing AFG nid=1 cad=1
pcm0: Vendor: 0x00008384
pcm0: Device: 0x00007690
pcm0: Revision: 0x00000022
pcm0: Stepping: 0x00000001
pcm0: PCI Subvendor: 0x022a1028
pcm0: Nodes: start=2 endnode=21 total=19
pcm0: CORB size: 256
pcm0: RIRB size: 256
pcm0: Streams: ISS=4 OSS=4 BSS=0
pcm0: GPIO: 0xc0000004
pcm0: NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=1 GPIUnsol=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=3 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=4 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=7 entries=3 found=3
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=9 entries=2 found=2
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=10 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=11 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=12 entries=5 found=5
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=13 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=14 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=15 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=16 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=17 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=19 entries=1 found=1
pcm0: HDA_DEBUG: Parsing Ctls...
pcm0: HDA_DEBUG: Parsing vendor patch...
pcm0: HDA_DEBUG: Building AFG tree...
pcm0: HDA_DEBUG: HWiP: HDA Widget Parser - Revision 1
pcm0: HDA_DEBUG: HWiP: Found 2 DAC path using HDA_PARSE_MIXER strategy.
pcm0: HDA_DEBUG: AFG commit...
pcm0: HDA_DEBUG: Ctls commit...
pcm0: [ 2] Ctl nid=11 Bind to NONE
pcm0: [ 4] Ctl nid=17 DISABLED
pcm0: HDA_DEBUG: PCMDIR_PLAY setup...
pcm0: HDA_DEBUG: PCMDIR_REC setup...
pcm0: HDA_DEBUG: OSS mixer initialization...
pcm0: HDA_DEBUG: Pin sense: nid=13 timeout=10000 res=0x7fffffff
pcm0: HDA_DEBUG: Enabling headphone/speaker audio routing switching:
pcm0: HDA_DEBUG: index=25 nid=13 pci_subvendor=0x022a1028 codec=0x83847690 [UNSOL]
pcm0: HDA_DEBUG: Forcing Soft PCM volume
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "mic":
pcm0: Mixer "rec":
pcm0: Soft PCM mixer ENABLED
pcm0: HDA_DEBUG: Registering PCM channels...
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: hdac_dma_alloc: size=4096 -> roundsz=4096
pcm0: sndbuf_setmap 265c000, 4000; 0xffffffffa7ac1000 -> 265c000
pcm0: hdac_dma_alloc: size=4096 -> roundsz=4096
pcm0: sndbuf_setmap 2664000, 4000; 0xffffffffa7ac5000 -> 2664000
pcm0: <HDA Codec: Sigmatel STAC9220>
pcm0: <HDA Codec ID: 0x83847690>
pcm0: <HDA Driver Revision: 20071129_0050>
pcm0:
pcm0: HDA config/quirks: softpcmvol forcestereo ivref50 ivref80 ivref100 ivref
pcm0:
pcm0: +-------------------+
pcm0: | DUMPING HDA NODES |
pcm0: +-------------------+
pcm0:
pcm0: Default Parameter
pcm0: -----------------
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: IN amp: 0x00000000
pcm0: OUT amp: 0x80051f1f
pcm0:
pcm0: nid: 2 [ANALOG]
pcm0: name: audio output
pcm0: widget_cap: 0x000d0401
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: connections: 0
pcm0:
pcm0: nid: 3 [ANALOG]
pcm0: name: audio input
pcm0: widget_cap: 0x001d0541
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000800
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 4 [DIGITAL] [DISABLED]
pcm0: name: audio input
pcm0: widget_cap: 0x00140311
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000005
pcm0: Format: AC3 PCM
pcm0: PCM cap: 0x000e0160
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=8 [pin: other (none)] [DISABLED]
pcm0:
pcm0: nid: 5 [DIGITAL] [DISABLED]
pcm0: name: audio output
pcm0: widget_cap: 0x00040211
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000005
pcm0: Format: AC3 PCM
pcm0: PCM cap: 0x000e01e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96
pcm0: connections: 0
pcm0:
pcm0: nid: 6 [DIGITAL] [DISABLED]
pcm0: name: vendor widget
pcm0: widget_cap: 0x00f30201
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: connections: 0
pcm0:
pcm0: nid: 7 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x00300901
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000081
pcm0: connections: 3
pcm0: |
pcm0: + <- nid=2 [audio output] (selected)
pcm0: |
pcm0: + <- nid=8 [pin: other (none)] [DISABLED]
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 8 [DIGITAL] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00430681
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00010024
pcm0: IN EAPD : UNSOL
pcm0: Pin config: 0x40f000f0
pcm0: Pin control: 0x00000020 IN
pcm0: EAPD: 0x00000002
pcm0: connections: 0
pcm0:
pcm0: nid: 9 [DIGITAL] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00400301
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000010
pcm0: OUT
pcm0: Pin config: 0x40f000f1
pcm0: Pin control: 0x00000040 OUT
pcm0: connections: 2
pcm0: |
pcm0: + <- nid=5 [audio output] [DISABLED]
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 10 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x0030090d
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000881
pcm0: Output amp: 0x80050f00
pcm0: mute=1 step=15 size=5 offset=0
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=12 [audio selector]
pcm0:
pcm0: nid: 11 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x00300105
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Output amp: 0x80051f1f
pcm0: mute=1 step=31 size=5 offset=31
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=7 [audio selector]
pcm0:
pcm0: nid: 12 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x0030010d
pcm0: Parse flags: 0x00000006
pcm0: Ctl flags: 0x00000081
pcm0: Output amp: 0x00270400
pcm0: mute=0 step=4 size=39 offset=0
pcm0: connections: 5
pcm0: |
pcm0: + <- nid=16 [pin: Mic in (jack)] (selected)
pcm0: |
pcm0: + <- nid=15 [pin: other (none)] [DISABLED]
pcm0: |
pcm0: + <- nid=14 [pin: speaker (fixed)]
pcm0: |
pcm0: + <- nid=13 [pin: headphones out (jack)]
pcm0: |
pcm0: + <- nid=18 [pin: other (none)] [DISABLED]
pcm0:
pcm0: nid: 13 [ANALOG]
pcm0: name: pin: headphones out (jack)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x0000003f
pcm0: ISC TRQD HP OUT IN : UNSOL
pcm0: Pin config: 0x0421101f
pcm0: Pin control: 0x00000080 HP
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 14 [ANALOG]
pcm0: name: pin: speaker (fixed)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x0000003f
pcm0: ISC TRQD HP OUT IN : UNSOL
pcm0: Pin config: 0x90170110
pcm0: Pin control: 0x00000040 OUT
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 15 [ANALOG] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000037
pcm0: ISC TRQD OUT IN : UNSOL
pcm0: Pin config: 0x40f000f2
pcm0: Pin control: 0x00000060 IN OUT
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 16 [ANALOG]
pcm0: name: pin: Mic in (jack)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000081
pcm0: Pin cap: 0x00001737
pcm0: ISC TRQD OUT IN VREF[ 50 80 GROUND HIZ ] : UNSOL
pcm0: Pin config: 0x04a11020
pcm0: Pin control: 0x00000024 IN
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 17 [ANALOG] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00400104
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000010
pcm0: OUT
pcm0: Pin config: 0x40f000f3
pcm0: Pin control: 0x00000040 OUT
pcm0: Output amp: 0x80051f1f
pcm0: mute=1 step=31 size=5 offset=31
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=19 [audio mixer]
pcm0:
pcm0: nid: 18 [ANALOG] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00400001
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000020
pcm0: IN
pcm0: Pin config: 0x40f000f4
pcm0: Pin control: 0x00000020 IN
pcm0: connections: 0
pcm0:
pcm0: nid: 19 [ANALOG]
pcm0: name: audio mixer
pcm0: widget_cap: 0x00200100
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=7 [audio selector]
pcm0:
pcm0: nid: 20 [ANALOG]
pcm0: name: beep widget
pcm0: widget_cap: 0x0070000c
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000021
pcm0: Output amp: 0x80170303
pcm0: mute=1 step=3 size=23 offset=3
pcm0: connections: 0
pcm0:
pcm0: +------------------------+
pcm0: | DUMPING HDA AMPLIFIERS |
pcm0: +------------------------+
pcm0:
pcm0: 1: nid=10 dir=0x1 index=0 ossmask=0x00000800 ossdev=0
pcm0: 2: nid=11 dir=0x1 index=0 ossmask=0x00000001 ossdev=0
pcm0: 3: nid=12 dir=0x1 index=0 ossmask=0x00000080 ossdev=7
pcm0: 4: nid=17 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 [DISABLED]
pcm0: 5: nid=20 dir=0x1 index=0 ossmask=0x00000020 ossdev=5
pcm0:
pcm0: +-----------------------------------+
pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS |
pcm0: +-----------------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- nid: 11 index: 0 mute: 1 step: 31 size: 5 off: 31 dir=0x1 ossmask=0x00000001
pcm0:
pcm0: Microphone Volume (OSS: mic)
pcm0: |
pcm0: +- nid: 12 index: 0 mute: 0 step: 4 size: 39 off: 0 dir=0x1 ossmask=0x00000080
pcm0:
pcm0: Recording Level (OSS: rec)
pcm0: |
pcm0: +- nid: 10 index: 0 mute: 1 step: 15 size: 5 off: 0 dir=0x1 ossmask=0x00000800
pcm0:
pcm0: Speaker/Beep (OSS: speaker)
pcm0: |
pcm0: +- nid: 20 index: 0 mute: 1 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000020
pcm0:
pcm0: Playback path:
pcm0:
pcm0: nid=13 [pin: headphones out (jack)]
pcm0: ^
pcm0: |
pcm0: +-----<------+
pcm0: ^
pcm0: |
pcm0: nid=11 [audio selector]
pcm0: ^
pcm0: |
pcm0: nid=7 [audio selector]
pcm0: ^
pcm0: |
pcm0: nid=2 [audio output]
pcm0:
pcm0: nid=14 [pin: speaker (fixed)]
pcm0: ^
pcm0: |
pcm0: +-----<------+
pcm0: ^
pcm0: |
pcm0: nid=11 [audio selector]
pcm0: ^
pcm0: |
pcm0: nid=7 [audio selector]
pcm0: ^
pcm0: |
pcm0: nid=2 [audio output]
pcm0:
pcm0: Recording sources:
pcm0:
pcm0: nid=12 [audio selector]
pcm0: |
pcm0: + <- nid=16 [pin: Mic in (jack)] [recsrc: vol, mic]
pcm0: |
pcm0: + <- nid=14 [pin: speaker (fixed)]
pcm0: |
pcm0: + <- nid=13 [pin: headphones out (jack)]
pcm0:
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: PCM Playback: 1
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: DAC: 2
pcm0:
pcm0: PCM Record: 1
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: ADC: 3
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
GEOM: new disk ad4
battery0: battery initialization done, tried 1 times
Trying to mount root from ufs:/dev/ad4s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?474808.60103.qm>