Date: Mon, 4 Nov 2013 20:42:03 -0800 From: Tim Kientzle <tim@kientzle.com> To: David Cheney <david.cheney@canonical.com> Cc: freebsd-arm@freebsd.org Subject: Re: freebsd/pandaboard Spurious interrupt detected [0x000003ff] Message-ID: <3FCAE16F-594B-466E-9E78-A847F52F891C@kientzle.com> In-Reply-To: <CAHPQsEQQ%2BZ29vZj%2BasoWB3mFPo-wU%2BJJ7LytGJ=q8BmPSozd_w@mail.gmail.com> References: <CAHPQsESP2aQxYDj0J=BdDUDhQdWnxMuAJ5fPNELGqLPsR==Ktg@mail.gmail.com> <1383526716.31172.131.camel@revolution.hippie.lan> <CAHPQsEQQ%2BZ29vZj%2BasoWB3mFPo-wU%2BJJ7LytGJ=q8BmPSozd_w@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Nov 3, 2013, at 6:19 PM, David Cheney <david.cheney@canonical.com> = wrote: >=20 > As a question to the group, I have the following hardware >=20 > Pandaboard > BeagleBone Black > RPi >=20 > And I am trying to bring up Freebsd/arm so I can get our Go builder > working again[1]. Of these candidates, which is the one you would > recommend ? Either the BBB or the RPi. Both are reasonably well-supported on FreeBSD/ARM right now. Each has issues, but there are enough people using each one that the issues are steadily getting resolved. > ... BBB ... selecting a very low, ~550mhz clock speed Yep. That would be one of the "issues." > =85 build times for ports and go of many hours. If your primary concern is build time for ports, talk to Stacey Son and Baptiste about Stacey's QEMU ARM activator. Basically, they've come up with a technique for running cross-builds on AMD64 hosts targeting ARM and MIPS at nearly native performance and using the native build scripts. It's the most promising approach so far for doing bulk builds targeting ARM and MIPS. Very clever, but hard to explain. Tim
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FCAE16F-594B-466E-9E78-A847F52F891C>