Date: Mon, 9 Mar 2009 08:18:11 -0700 From: Andrew Thompson <thompsa@FreeBSD.org> To: "M. Warner Losh" <imp@bsdimp.com> Cc: usb@freebsd.org, freebsd-usb@freebsd.org Subject: Re: Latest kernel breaks scanner Message-ID: <20090309151811.GA40452@citylink.fud.org.nz> In-Reply-To: <20090309.073931.635732127.imp@bsdimp.com> References: <200903091233.55089.hselasky@c2i.net> <20090309.065558.-432839106.imp@bsdimp.com> <200903091404.34912.hselasky@c2i.net> <20090309.073931.635732127.imp@bsdimp.com>
index | next in thread | previous in thread | raw e-mail
On Mon, Mar 09, 2009 at 07:39:31AM -0600, M. Warner Losh wrote:
> In message: <200903091404.34912.hselasky@c2i.net>
> Hans Petter Selasky <hselasky@c2i.net> writes:
> : On Monday 09 March 2009, M. Warner Losh wrote:
> : > In message: <200903091233.55089.hselasky@c2i.net>
> : >
> : > Hans Petter Selasky <hselasky@c2i.net> writes:
> : > : On Sunday 08 March 2009, Andrew Thompson wrote:
> : > : > On Sun, Mar 08, 2009 at 03:43:53PM -0600, M. Warner Losh wrote:
> : > : > > In message: <20090308203157.GC30672@citylink.fud.org.nz>
> : > : > >
> : > : > > Andrew Thompson <thompsa@FreeBSD.org> writes:
> : > : > > : On Sun, Mar 08, 2009 at 01:06:59PM -0600, M. Warner Losh wrote:
> : > : > > : > Sigh. Had a working system from Mar 4th. Upgraded now it
> : > : > > : > doesn't work. Scanner not found by xsane.
> : > : > > :
> : > : > > : Are you sure its not this?
> : > : > > :
> : > : > > : 20090227:
> : > : > > : The /dev handling for the new USB stack has changed, a
> : > : > > : buildworld/installworld is required for libusb20.
> : > : > >
> : > : > > Yes. Been there, done that. Also have the libmap.conf changes in
> : > : > > place for old binaries that had worked for months before that. xsane
> : > : > > used to just work in this setup, but now fails. Looks like some kind
> : > : > > of mismatch in the ABI:
> : > : > >
> : > : > > found USB scanner (UNKNOWN vendor and product) at device
> : > : > > /dev/uscanner0
> : > : >
> : > : > Not sure what would have caused that. Before you spend too much time on
> : > : > this you may want to note that the integration patches for libusb into
> : > : > the ports build will likely be committed tomorrow. This will bump the
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> : > : > port numbers so the affected ports rebuild, hopefully sane with DTRT
> : > : > after that.
> : > :
> : > : Maybe you need to chown or rm /dev/uscanner0 to enforce use of libusb
> : > : backend?
> : >
> : > never had to do that before...
> :
> : Or recompile all of the sane backends. Probably an IOCTL on the uscanner0 is
> : broken, and the fallback to libusb backend will maybe solve your problem
> : temporarily if you rm /dev/uscanner0 .
>
> Can't do it. devel/libusb is broken. Been there tried that: Didn't
> work.
>
> I do know that it has *NEVER* found the device when I don't have
> uscanner loaded, even when ugen was loaded...
>
> : Actually that is another question:
> :
> : Should we remove ID's from uscanner.c which will work fine attaching through
> : the libusb backend ?
>
> Unlikely, given my experience that it appears to be required...
>
> Anyway, it is going to be at least a week before I can do anything on
> this again because the scanner is at home right now, and I'm in the
> airport waiting for my flight to AsiaBSDCon 2009...
This is about to be fixed, see above. Hopefully everything is good on
your return :)
Andrew
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090309151811.GA40452>