Date: Wed, 10 Aug 2011 08:51:32 +0200 From: Marek Salwerowicz <marek_sal@wp.pl> To: Freddie Cash <fjwcash@gmail.com>, freebsd-net@freebsd.org Subject: Re: ipfw - accessing DMZ from LAN Message-ID: <4E422A74.3090601@wp.pl> In-Reply-To: <CAOjFWZ4B3uUfOLAzL=B1WY98rqi6X32j7FM61VjJ3td76NkADg@mail.gmail.com> References: <4E412116.1070305@wp.pl> <CAOjFWZ4B3uUfOLAzL=B1WY98rqi6X32j7FM61VjJ3td76NkADg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
W dniu 2011-08-09 18:04, Freddie Cash pisze:
> On Tue, Aug 9, 2011 at 4:59 AM, Marek Salwerowicz<marek_sal@wp.pl> wrote:
>
>> I have set up a new router for my network, with separated DMZ zone for my
>> internet servers. I'd like computers from my LAN to be able to connect to
>> DMZ zone.
>>
>> My ISP provided me some public IP's, so right now configuration looks like
>> this:
>>
>> Router with 4 NICs:
>> #public ISP
>> ifconfig_vr3="inet xx.yy.zz.171 netmask 255.255.255.248"
>> ifconfig_vr3_alias0="inet xx.yy.zz.170 netmask 255.255.255.255"
>> ifconfig_vr3_alias1="inet xx.yy.zz.172 netmask 255.255.255.255"
>> ifconfig_vr3_alias2="inet xx.yy.zz.173 netmask 255.255.255.255"
>>
>> The first IP, with suffix .171 I want to be used as real router's IP, and
>> public IP for computers in my LAN.
>> All 3 aliases I want to be redirected to DMZ (one public IP for each server
>> in DMZ)
>>
>> #DMZ
>> ifconfig_vr2="inet 192.168.0.1 netmask 255.255.255.0"
>>
>> #LAN
>> ifconfig_vr0="inet 10.0.0.1 netmask 255.255.255.0"
>>
>> I've set up in natd.conf:
>>
>> use_sockets yes
>> same_ports yes
>> interface vr3
>> dynamic yes
>> unregistered_only yes
>> redirect_address 192.168.0.10 xx.yy.zz.170 #DMZ host 1
>> redirect_address 192.168.0.20 xx.yy.zz.172 #DMZ host 2
>> redirect_address 192.168.0.30 xx.yy.zz.173 #DMZ host 3
>>
>> Right now everything works from the Internet - if I do ssh to xx.yy.zz.170,
>> I really can connect to host 192.168.0.10 etc.
>>
>> The problem is that when I want to connect from my 10.0.0.0/24 network
>> (and even from router) to any DMZ host, using it's public address (any of
>> xx.yy.zz.{170,172,173} ), I can't connect and in fact I am connecting to the
>> router..
>> So I am unable to access my web, mta, ftp servers that are located in DMZ
>>
>> My ipfw firewall script looks as follows:
>>
>> #!/bin/sh
>>
>> cmd="ipfw -q"
>>
>> DMZ="192.168.0.0/24"
>> LAN="10.0.0.0/24"
>>
>> kldstat -q -m dummynet || kldload dummynet
>> $cmd flush
>>
>> $cmd add 80 divert natd ip from any to any via vr3
>> $cmd add 90 allow ip from any to any via lo0
>>
>> $cmd add 100 allow ip from any to me
>> $cmd add 101 allow ip from me to any
>>
>> $cmd add 500 deny ip from $DMZ to $LAN
>> $cmd add 510 deny ip from $LAN to $DMZ
>>
>>
>> $cmd add 10000 allow ip from any to any
>>
>> I know I've blcoked traffic between DMZ and LAN, but I wanted them to
>> contact via public IPs.. but now I'm not sure if it's possible...
>>
>> Can you give me some hints on how to properly configure my router?
>>
> There are two ways to do this, depending on whether or not you want to
> "leak" you private LAN IPs into the DMz.
>
> The simplest method, where LAN clients connect to the public IP of the DMZ
> servers, and where the DMZ servers see the private IPs of the clients, is
> like so:
>
> # Configure the natd process to NAT from x.x.x.170 to 192.168.0.10 using
> some port
> natd -port $port -same_ports -use_sockets -alias_address x.x.x.170
> -redirect_address x.x.x.170 192.168.0.10
>
> # NAT the traffic coming from the LAN to x.x.x.170
> ipfw add divert $port ip from $LAN to x.x.x.170 in recv vr0
> ipfw add allow ip from $LAN to 192.168.0.10 in recv vr0
>
> ipfw add allow ip from $LAN to 192.168.0.10 out xmit vr2
> ipfw add allow ip from 192.168.0.10 to $LAN in recv vr2
>
> ipfw add divert ip from 192.168.0.10 to $LAN out xmit vr0
> ipfw add allow ip from x.x.x.170 to $LAN out xmit vr0
>
> Repeat the above for each of the servers in the DMZ, using separate natd
> processes for each, with separate divert port numbers.
>
> The general flow of the rules above is (src --> dest)
> 10.0.0.x --> x.x.x.170
> 10.0.0.x --> 192.168.0.10
>
> 192.168.0.10 --> 10.0.0.x
> x.x.x.170 --> 10.0.0.x
>
>
> The more correct method is to double-NAT the traffic, such that the LAN
> clients connect to public IPs, and the DMZ servers see connections from
> public IPs. It's more complicated to wrap your head around the first time,
> but it prevents private IPs from "leaking" between the LAN, the Internet,
> and the DMZ. (It took me 10 years of using IPFW to figure this one out.)
>
> # Configure the general natd process for the LAN
> natd -port $port2 -same_ports -use_sockets -alias_address x.x.x.171
>
> # Configure the natd process to NAT from x.x.x.170 to 192.168.0.10 using
> some port
> natd -port $port1 -same_ports -use_sockets -alias_address x.x.x.170
> -redirect_address x.x.x.170 192.168.0.10
>
> # NAT the traffic coming from the LAN to x.x.x.170
> ipfw add divert $port1 ip from $LAN to x.x.x.170 in recv vr0
> ipfw add allow ip from $LAN to 192.168.0.10 in recv vr0
>
> # NAT the traffic going to x.x.x.170 from the LAN
> ipfw add divert $port2 ip from $LAN to 192.168.0.10 out xmit vr2
> ipfw add allow ip from x.x.x.171 to 192.168.0.10 out xmit vr2
>
> # NAT the traffic coming from x.x.x.170 to the LAN
> ipfw add divert $port1 ip from 192.168.0.10 to x.x.x.171 in recv vr2
> ipfw add allow ip from 192.168.0.10 to $LAN in recv vr2
>
> # NAT the traffic going to the LAN from x.x.x.170
> ipfw add divert ip from 192.168.0.10 to $LAN out xmit vr0
> ipfw add allow ip from x.x.x.170 t0 $LAN out xmit vr0
>
> The general flow of the rules above is (src --> dest)
> 10.0.0.x --> x.x.x.170
> 10.0.0.x --> 192.168.0.10 (after first NAT)
> x.x.x.171 --> 192.168.0.10 (after second NAT)
>
> 192.168.0.10 --> x.x.x.171
> 192.168.0.10 --> 10.0.0.x (after first NAT)
> x.x.x.170 --> 10.0.0.x (after second NAT)
>
> Notice how vr3 is never used in any of the rules above, as the packets never
> touch the public interface of the router.
>
Thanks for that hints.
Do you mean $port viariables as particular port numbers?
So for each service in DMZ I want to be available I have to create such
set of rules?
Regards,
--
Marek Salwerowicz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4E422A74.3090601>