Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 3 Jan 2013 20:59:07 -0800
From:      Adrian Chadd <adrian@freebsd.org>
To:        Monthadar Al Jaberi <monthadar@gmail.com>
Cc:        freebsd-wireless@freebsd.org, freebsd-mips@freebsd.org
Subject:   Re: ath0: could not map interrupt
Message-ID:  <CAJ-Vmon5pe4-7wN_0b46hyK-jiojaKC=7BWeCLH6L_viTsochg@mail.gmail.com>
In-Reply-To: <CA%2BsBSoJgO6VWwc_43_SkThxG1ZcRh6iEJZdZ3yandNfEd8LNZw@mail.gmail.com>
References:  <CA%2BsBSoKs9s0SxAOyf91pcPv0MZMx3LCHh%2B_dTN-2mEQdYdH45g@mail.gmail.com> <CA%2BsBSo%2BpxqvWkrMjd8pmJSYUBdr0HuMW4eARJFcaFrG5tEYqBg@mail.gmail.com> <CAJ-Vmon%2BGzpXYkfE%2Bu7CDoXqmpH=zeJPcQdrukxAa9QH-2GazQ@mail.gmail.com> <CA%2BsBSoJg%2B%2BNo1ApSfUVnh1dDVgqEUPLpFJZPv3Ac%2BvaMno01sQ@mail.gmail.com> <CA%2BsBSoJY7AHjN=cMv6sfXHF4R0_z60c4q9BXEo20jCq6BJGEPg@mail.gmail.com> <CA%2BsBSoJgO6VWwc_43_SkThxG1ZcRh6iEJZdZ3yandNfEd8LNZw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
... wow. How the hell is that happening?!




Adrian


On 3 January 2013 20:54, Monthadar Al Jaberi <monthadar@gmail.com> wrote:
> Maybe this is the root of the problem.
>
> On RSPRO the PCI start slot enumerating from 17. While RB433AH start
> from 18. That can explain why Slot 20 of RB433AH won't even attach
> (AR7161 only has 3 slots, slot 17 to 19). That can also explain why I
> get device_timeout on slot 18 and 19 cause they are miss aligned. And
> don't see any interrupts from ath(4) when enabling interrupt
> debugging.
>
> I will keep digging into why they won't start enumerating correct.
>
> br,
>
> On Fri, Jan 4, 2013 at 2:28 AM, Monthadar Al Jaberi <monthadar@gmail.com> wrote:
>> Hi,
>>
>> I am wondering if anyone can confirm that any ath5k (preferably
>> AR5413) series miniPCI wifi works on RB433/AH/UAH.
>>
>> Thank you in advance
>>
>> On Wed, Jan 2, 2013 at 10:29 PM, Monthadar Al Jaberi
>> <monthadar@gmail.com> wrote:
>>> On Wed, Jan 2, 2013 at 9:43 PM, Adrian Chadd <adrian@freebsd.org> wrote:
>>>> ... sounds like a definite interrupt routing issue.
>>>>
>>>> Who's been knee deep in the interrupt handling code in MIPS lately? Grrr.
>>>> I know there's been some FDT work in MIPS and that's touched some
>>>> interrupt code.. maybe that's interfering?
>>>
>>> I am not sure, I just re-compiled my kernel for RSPRO and it seems to work.
>>>
>>> I install openwrt on rb433ah and ath0 associated ok. and I could ping
>>> between RSPRO(FreeBSD) and RB433AH(Openwrt). RSPRO and non working
>>> RB433AH  running same kernel r243866.
>>>
>>> Attached is my kernel config & hints. ( I am "playing around" with the
>>> ar71xx_spi but that should not effect the pci code, I hope).
>>>
>>> #
>>> # AR71XX -- Kernel configuration file for FreeBSD/MIPS for Atheros 71xx systems
>>> #
>>> # This includes all the common drivers for the AR71XX boards along with
>>> # the usb, net80211 and atheros driver code.
>>> #
>>> # $FreeBSD$
>>> #
>>>
>>> machine         mips mips
>>> ident           RB433AH_MFS
>>> cpu             CPU_MIPS4KC
>>> makeoptions     KERNLOADADDR=0x80050000
>>> options         HZ=1000
>>> options         HWPMC_HOOKS
>>>
>>> files           "../atheros/files.ar71xx"
>>>
>>> # For now, hints are per-board.
>>>
>>> hints           "RB433AH.hints"
>>>
>>> makeoptions     DEBUG=-g                #Build kernel with gdb(1) debug symbols
>>>
>>> # Build these as modules so small platform builds will have the
>>> # modules already built.
>>> makeoptions     MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre
>>> if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip
>>> wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci"
>>>
>>> options         DDB
>>> options         KDB
>>>
>>> options         SCHED_4BSD              #4BSD scheduler
>>> options         INET                    #InterNETworking
>>> #options                INET6                   # IPv6
>>>
>>> # options               NFS_CL          #Network Filesystem Client
>>>
>>> options         PSEUDOFS                #Pseudo-filesystem framework
>>> options         _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
>>>
>>> # options               NFS_LEGACYRPC
>>> # Debugging for use in -current
>>> options         INVARIANTS
>>> options         INVARIANT_SUPPORT
>>> options         WITNESS
>>> options         WITNESS_SKIPSPIN
>>> options         DEBUG_REDZONE
>>> options         DEBUG_MEMGUARD
>>>
>>> options         FFS                     #Berkeley Fast Filesystem
>>> # options         SOFTUPDATES             #Enable FFS soft updates support
>>> # options         UFS_ACL                 #Support for access control lists
>>> # options         UFS_DIRHASH             #Improve performance on big
>>> directories
>>> # options               MSDOSFS                 # Read MSDOS filesystems; useful for USB/CF
>>>
>>> device          pci
>>> device          ar71xx_pci
>>>
>>> # RTC - requires hackery in the spibus code to work
>>> device          pcf2123_rtc
>>>
>>> # GEOM modules
>>> device          geom_redboot    # to get access to the SPI flash partitions
>>> device          geom_uzip       # compressed in-memory filesystem hackery!
>>> device          geom_map
>>> options         GEOM_UZIP
>>>
>>> # NANDFS
>>> options         NANDFS
>>>
>>> ## Boot from the first MFS uzip
>>> #options                ROOTDEVNAME=\"ufs:md0.uzip\"
>>> #options                MD_ROOT
>>> #options                MD_ROOT_SIZE="9000"
>>>
>>> # Boot from NFS
>>> options         NFSLOCKD                #Network Lock Manager
>>> options         NFSCLIENT               #Network Filesystem Client
>>> options         NFS_ROOT
>>>
>>> options         BOOTP
>>> options         BOOTP_NFSROOT
>>> options         BOOTP_NFSV3
>>> options         BOOTP_WIRED_TO=arge1
>>> options         BOOTP_COMPAT
>>> options         ROOTDEVNAME=\"nfs:172.16.0.101:/usr/obj/rb433ah/nfs\"
>>>
>>>
>>> # 802.11 framework
>>> options         IEEE80211_DEBUG
>>> options         IEEE80211_ALQ
>>> options         IEEE80211_SUPPORT_MESH
>>> # This option is currently broken for if_ath_tx.
>>> options         IEEE80211_SUPPORT_TDMA
>>> options         IEEE80211_AMPDU_AGE
>>> device          wlan            # 802.11 support
>>> device          wlan_wep        # 802.11 WEP support
>>> device          wlan_ccmp       # 802.11 CCMP support
>>> device          wlan_tkip       # 802.11 TKIP support
>>> device          wlan_xauth      # 802.11 hostap support
>>> device          wlan_acl        # 802.11 ACL support
>>>
>>> # Atheros wireless NICs
>>> device          ath             # Atheros interface support
>>> device          ath_pci         # Atheros PCI/Cardbus bus
>>> options         ATH_DEBUG
>>> options         ATH_DIAGAPI
>>> options         ATH_ENABLE_11N
>>> options         AH_DEBUG
>>> options         AH_DEBUG_ALQ
>>> options         ALQ
>>> device          ath_hal
>>> option          AH_SUPPORT_AR5416
>>> device          ath_rate_sample
>>> option          AH_RXCFG_SDMAMW_4BYTES
>>> option          AH_AR5416_INTERRUPT_MITIGATION
>>> # There's no DFS radar detection support yet so this won't actually
>>> # detect radars.  It however does enable the rest of the channel change
>>> # machinery so DFS can be debugged.
>>> option          ATH_ENABLE_DFS
>>>
>>> device          mii
>>> device          arge
>>> #options                ARGE_DEBUG      # Enable if_arge debugging for now
>>>
>>> #device         usb
>>> #options                USB_EHCI_BIG_ENDIAN_DESC        # handle big-endian byte order
>>> #options                USB_DEBUG
>>> #options                USB_HOST_ALIGN=32               # AR71XX (MIPS in general?) requires this
>>> #device         ehci
>>>
>>> device          scbus
>>> #device         umass
>>> device          da
>>>
>>> device          rb4xx
>>>
>>> # On-board SPI flash
>>> device          spibus
>>> device          ar71xx_spi
>>> device          mmc
>>> device          mmcsd
>>> device          mmcspi
>>> device          mx25l
>>> device          nand
>>> device          ar71xx_wdog
>>>
>>> device          uart
>>> device          uart_ar71xx
>>>
>>> device          loop
>>> device          ether
>>> device          md
>>> device          bpf
>>> device          random
>>> device          if_bridge
>>> device          gif             # ip[46] in ip[46] tunneling protocol
>>> device          gre             # generic encapsulation - only for IPv4 in IPv4 though atm
>>>
>>> # Enable GPIO
>>> device          gpio
>>> device          gpioled
>>>
>>> options         AR71XX_ROUTERBOOT
>>>
>>>
>>> # $FreeBSD$
>>> hint.apb.0.at="nexus0"
>>> hint.apb.0.irq=4
>>>
>>> # uart0
>>> hint.uart.0.at="apb0"
>>> # see atheros/uart_cpu_ar71xx.c why +3
>>> hint.uart.0.maddr=0x18020003
>>> hint.uart.0.msize=0x18
>>> hint.uart.0.irq=3
>>>
>>> #ohci
>>> #hint.ohci.0.at="apb0"
>>> #hint.ohci.0.maddr=0x1c000000
>>> #hint.ohci.0.msize=0x01000000
>>> #hint.ohci.0.irq=6
>>>
>>> #ehci
>>> #hint.ehci.0.at="nexus0"
>>> #hint.ehci.0.maddr=0x1b000000
>>> #hint.ehci.0.msize=0x01000000
>>> #hint.ehci.0.irq=1
>>>
>>> # pci
>>> hint.pcib.0.at="nexus0"
>>> hint.pcib.0.irq=0
>>>
>>> hint.arge.0.at="nexus0"
>>> hint.arge.0.maddr=0x19000000
>>> hint.arge.0.msize=0x1000
>>> hint.arge.0.irq=2
>>> # PHY4 = 1 << 4
>>> hint.arge.0.phymask=0x10
>>> # Uncomment this hint for RS (not PRO)
>>> # PHY20 = 1 << 20
>>> # hint.arge.0.phymask=0x100000
>>> hint.ukphy.0.at="miibus0"
>>>
>>> hint.arge.1.at="nexus0"
>>> hint.arge.1.maddr=0x1a000000
>>> hint.arge.1.msize=0x1000
>>> hint.arge.1.irq=3
>>> # PHY1, PHY2, PHY3
>>> hint.arge.1.phymask=0x00
>>> # should be 100 for RS
>>> #hint.arge.1.media=100
>>> #hint.arge.1.fduplex=1
>>> # Uncomment this hint for RS (not PRO)
>>> # hint.arge.1.phymask=70000
>>>
>>> # SPI flash
>>> hint.spi.0.at="nexus0"
>>> hint.spi.0.maddr=0x1f000000
>>> hint.spi.0.msize=0x10
>>>
>>> hint.mx25l.0.at="spibus0"
>>> hint.mx25l.0.cs=1
>>>
>>> hint.rb_cpldbus.0.at="spibus0"
>>> hint.rb_cpldbus.0.cs=1
>>> #
>>> hint.onand.0.at="nandbus0"
>>> hint.lnand.0.at="nandbus0"
>>> hint.snand.0.at="nandbus0"
>>>
>>> hint.flash.0.at="nand0"
>>> hint.flash.0.size="0x40000"
>>> hint.flash.0.offset="0"
>>> hint.flash.0.name="bootloader"
>>> hint.flash.1.at="nand0"
>>> hint.flash.1.size="0x3c0000"
>>> hint.flash.1.offset="0x40000"
>>> hint.flash.1.name="kernelfs"
>>> hint.flash.2.at="nand0"
>>> hint.flash.2.size="0"
>>> hint.flash.2.offset="0x400000"
>>> hint.flash.2.name="rootfs"
>>>
>>> hint.ar71xx_gpio.0.at="nexus0"
>>>
>>> #hint.rb_nandbusy.0.at="gpiobus0"
>>>
>>> hint.mmcspi.0.at="spibus0"
>>> hint.mmcspi.0.cs=2
>>>
>>> # Watchdog
>>> hint.ar71xx_wdog.0.at="nexus0"
>>>
>>>
>>> br,
>>>
>>>>
>>>>
>>>> Adrian
>>>>
>>>>
>>>> On 2 January 2013 12:40, Monthadar Al Jaberi <monthadar@gmail.com> wrote:
>>>>> I tested some more. First I changed the miniPCI slot. Now boot looks like this:
>>>>>
>>>>> pcib0 at irq 0 on nexus0
>>>>> pci0: <PCI bus> on pcib0
>>>>> ath0: <Atheros 5413> irq 2 at device 19.0 on pci0
>>>>> ath0: AR5413 mac 10.5 RF5413 phy 6.1
>>>>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063
>>>>>
>>>>>
>>>>> Then I created a hostap. But none of my other devices sees it (laptop, iphone).
>>>>>
>>>>> A scan results in:
>>>>>
>>>>> # ifconfig wlan0 scan
>>>>> wlan0: ieee80211_scanreq: flags 0x1b duration 0x7fffffff mindwell 0
>>>>> maxdwell 0 nssid 0
>>>>> wlan0: start_scan_locked: active scan, duration 2147483647 mindwell 0
>>>>> maxdwell 0, desired mode 11g, append, nopick, once
>>>>> wlan0: scan set 11g dwell min 200ms max 200ms
>>>>> wlan0: scan_task: chan  11g ->  11g [active, dwell min 200ms max 200ms]
>>>>> wlan0: ieee80211_ref_node (ieee80211_send_probereq:1822)
>>>>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 4
>>>>> wlan0: send probe req on channel 11 bssid ff:ff:ff:ff:ff:ff ssid ""
>>>>> wlan0: scan_task: done, [ticks 2657909, dwell min 200 scanend 2150141333]
>>>>> wlan0: notify scan done
>>>>> root@rb433ah:~ # ath0: device timeout
>>>>>
>>>>> And when I try to ping a random IP address I get the following.
>>>>> Interesting is that it seems to "bail out" when it tries to send
>>>>> probe_resp (last in output):
>>>>> $ ping -c 1 172.168.3.2
>>>>> PING 172.168.3.2 (172.168.3.2): 56 data bytes
>>>>> ath0: device timeout
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 8
>>>>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, id 47, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: [94:0c:6d:ad:61:18] discard frame, not to bss
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 48
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 2
>>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch:
>>>>> 0x9ccca48e6a3b0c7f661c24413d7b9e54c5e59ddbe0c2bd96a2e65410b662f71a
>>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 5
>>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "default"
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 4
>>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "default"
>>>>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 9
>>>>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, id 47, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 43
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 45
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 47
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 44
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>>> wlan0: received probe_req from 00:aa:70:77:bd:77 rssi 0
>>>>> wlan0: [00:aa:70:77:bd:77] recv probe req
>>>>> wlan0: ieee80211_ref_node (ieee80211_send_proberesp:2489)
>>>>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 5
>>>>> wlan0: send probe resp on channel 11 to 00:aa:70:77:bd:77
>>>>> ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
>>>>> ....
>>>>>
>>>>>
>>>>> On Tue, Jan 1, 2013 at 7:33 PM, Monthadar Al Jaberi <monthadar@gmail.com> wrote:
>>>>>> Hi,
>>>>>>
>>>>>> ath(4) failed to attach on my Routerboard RB433AH running FreeBSD
>>>>>> current. This is what I got during boo-up.
>>>>>>
>>>>>> pcib0 at irq 0 on nexus0
>>>>>> pci0: <PCI bus> on pcib0
>>>>>> ath0: <Atheros 5413> irq 3 at device 20.0 on pci0
>>>>>> ath0: could not map interrupt
>>>>>> device_attach: ath0 attach returned 6
>>>>>>
>>>>>> Any idea why? Anyone else is running ath(4) on this board? My wifi
>>>>>> card is a Ubiquity X2 with AR5413 chip.
>>>>>>
>>>>>> br,
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Monthadar Al Jaberi
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Monthadar Al Jaberi
>>>>> _______________________________________________
>>>>> freebsd-wireless@freebsd.org mailing list
>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
>>>
>>>
>>>
>>> --
>>> Monthadar Al Jaberi
>>
>>
>>
>> --
>> Monthadar Al Jaberi
>
>
>
> --
> Monthadar Al Jaberi



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmon5pe4-7wN_0b46hyK-jiojaKC=7BWeCLH6L_viTsochg>