Date: Thu, 19 Nov 2009 18:27:23 -0500 From: "illoai@gmail.com" <illoai@gmail.com> To: neutral neutral <ptr.neutral@gmail.com> Cc: freebsd-current@freebsd.org Subject: Re: High INTERRUPT rate on CPU 0 Message-ID: <d7195cff0911191527g206f61bdq3d5a61cf97234b15@mail.gmail.com> In-Reply-To: <1c0233f80911171234i5b908678lef2327ab7c040c81@mail.gmail.com> References: <1c0233f80911171234i5b908678lef2327ab7c040c81@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
2009/11/17 neutral neutral <ptr.neutral@gmail.com>: > Hello, > > Yesterday I get a fresh install of FreeBSD 8.0 RC3 Current. However just > some hours after the installation the machine began very slow/laggy. . . . > $ vmstat -i > interrupt =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0total =A0 = =A0 =A0 rate > irq1: atkbd0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 201 =A0 =A0 = =A0 =A0 =A00 > irq12: psm0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A09 =A0 = =A0 =A0 =A0 =A00 > irq16: fwohci0+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A02 =A0 =A0 = =A0 =A0 =A00 > irq19: uhci2 ehci* =A0 =A0 =A0 =A0 =A0 =A0 =A025229879 =A0 =A0 =A089151 > irq23: uhci3 ehci1 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A04852 =A0 =A0 =A0 = =A0 17 > cpu0: timer =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 565386 =A0 =A0 = =A0 1997 > irq256: mskc0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0389 =A0 =A0 = =A0 =A0 =A01 > cpu1: timer =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 562755 =A0 =A0 = =A0 1988 > Total =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 26363473 =A0 = =A0 =A093157 > $ > > > $ dmesg | grep uhci2 > uhci2: <Intel 82801I (ICH9) U$ dmesg | grep uhci2 > uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 19 at > device 26.2 on pci0 > uhci2: [ITHREAD] > uhci2: LegSup =3D 0x0010 > usbus2: <Intel 82801I (ICH9) USB controller> on uhci2 > SB controller> port 0x1840-0x185f irq 19 at device 26.2 on pci0 > uhci2: [ITHREAD] > uhci2: LegSup =3D 0x0010 > usbus2: <Intel 82801I (ICH9) USB controller> on uhci2 Umm, IRQ19 looks a bit suspect. My noisiest non-CPU IRQ is running 31, so you're only 3 orders of magnitude higher. What usb devices do you have attached to those controllers? --=20 --
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d7195cff0911191527g206f61bdq3d5a61cf97234b15>