Date: Wed, 06 Oct 1999 19:28:26 +0900 From: Behcet Sarikaya <sarikaya@u-aizu.ac.jp> To: Luigi Rizzo <luigi@labinfo.iet.unipi.it> Cc: luigi@iet.unipi.it, freebsd-questions@FreeBSD.org Subject: Re: Sound Card pcm driver config problem Message-ID: <37FB2449.377989C2@u-aizu.ac.jp> References: <199910061035.LAA12703@labinfo.iet.unipi.it>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks, but still can not get it. Using BIOS I disabled the parallel port. I disabled the onboard sound support. I have a quite old Dell Optiplex GMTX whose BIOS does not understand pnp, no way of knowing about drq settings using BIOS, so I set up pnp parameters using boot -c (my previous mail has the setup line I entered). Here is my kernel config file: machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident DELLCOM maxusers 32 options MROUTING options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options "INET6" #IPv6 #options RADISH #not yet #options IPSEC #IP security #options IPSEC_ESP #IP security (crypto; define w/ IPSEC) #options IPSEC_DEBUG #debug for IP security #options NATM #native mode ATM options MAPPED_ADDR_ENABLED options ALTQ #alternate queueing options CBQ #class based queueing options WFQ #weighted fair queueing #options FIFOQ #fifo queueing options RED #random early detection options CBQ_RED #red for cbq #options RIO #twin red for diffserv (needs RED) #options CBQ_RIO #rio for cbq (needs CBQ, RIO, CBQ_RED) #options LOCALQ #local use options ALTQ_ACCOUNT #altq accounting #options ALTQ_ECN #ecn extention to tcp # you might want to set kernel timer to 1kHz if you use CBQ with 100baseT options HZ=1000 options DIFF_SERV options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 controller pnp0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device acd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ncr0 controller ahb0 controller ahc0 controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. controller dpt0 controller adv0 at isa? port ? cam irq ? controller adw0 controller bt0 at isa? port ? cam irq ? controller aha0 at isa? port ? cam irq ? controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device wt0 at isa? port 0x300 bio irq 5 drq 1 device mcd0 at isa? port 0x300 bio irq 10 controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x230 bio # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? tty #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port IO_NPX irq 13 # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 device sio1 at isa? port "IO_COM2" tty irq 3 device sio2 at isa? disable port "IO_COM3" tty irq 5 #device sio3 at isa? disable port "IO_COM4" tty irq 9 # Parallel port device ppc0 at isa? port? flags 0x40 net irq 7 controller ppbus0 device lpt0 at ppbus? device plip0 at ppbus? device ppi0 at ppbus? #controller vpo0 at ppbus? # # The following Ethernet NICs are all PCI devices. # device ax0 # ASIX AX88140A device de0 # DEC/Intel DC21x4x (``Tulip'') device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) device mx0 # Macronix 98713/98715/98725 (``PMAC'') device pn0 # Lite-On 82c168/82c169 (``PNIC'') device rl0 # RealTek 8129/8139 device tl0 # Texas Instruments ThunderLAN device tx0 # SMC 9432TX (83c170 ``EPIC'') device vr0 # VIA Rhine, Rhine II device vx0 # 3Com 3c590, 3c595 (``Vortex'') device wb0 # Winbond W89C840F device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 #device ep0 at isa? port 0x300 net irq 10 device ex0 at isa? port? net irq? device fe0 at isa? port 0x300 net irq ? device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 device lnc0 at isa? port 0x280 net irq 10 drq 0 device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 device cs0 at isa? port 0x300 net irq ? device wl0 at isa? port 0x390 net irq 10 vector wlintr pseudo-device loop pseudo-device ether #pseudo-device sl 1 # INET6 unsupported due to no multicast support #pseudo-device ppp 1 # INET6 unsupported due to no multicast support pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip options SYSVSHM options SYSVMSG options SYSVSEM pseudo-device gif 4 pseudo-device dummy 1 device pcm1 at isa ? port? tty irq 5 drq 1 flags 0x13 vector pcmintr -------------------------------------------------- Any clues? -- Behcet Sarikaya Computer Communications Lab. The University of Aizu Tsuruga, Ikki-machi, Aizu-wakamatsu City Fukushima, 965-8580 Japan Tel. +81-242-37-2559 Fax. +81-242-37-2742 Home page: http://www.u-aizu.ac.jp/~sarikaya/ email: sarikaya@u-aizu.ac.jp To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?37FB2449.377989C2>