Date: Wed, 14 Jan 2004 20:59:29 +1100 From: matti k <matti@optusnet.com.au> To: current@freebsd.org Cc: noackjr@compgeek.com Subject: Re: 5.2-RELEASE: unable to mount cd-roms Message-ID: <20040114205929.0b63002a.matti@optusnet.com.au> In-Reply-To: <4003AE67.1050704@compgeek.com> References: <4003AE67.1050704@compgeek.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On Tue, 13 Jan 2004 02:37:59 -0600
Jon Noack <noackjr@compgeek.com> wrote:
> I am unable to mount CD-ROMs with 5.2-RELEASE. I get the following
> error message:
>
> cd9660: /dev/acd0: Input/output error
I saw this on 5.2-RC2. I have cdrom drives on primary master and
secondary master. Using SATA controller (Sil3112 ;)) for hard drive. I
could mount the secondary drive ok but not the primary. Had to use
umount -f to unmount it though.
> Also, toggling "hw.ata.atapi_dma" does not change the behavior.
Disabling this allowed me to mount both cdrom drives but still had to
use umount -f.
Both drives are working correctly with 5.2-CURRENT updated yesterday.
Here's a dmesg :) ...
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Tue Jan 13 21:03:11 EST 2004
root@wombat.freebsd.home:/usr/obj/usr/src/sys/WOMBAT1
Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e6000.
Preloaded elf module "/boot/kernel/if_nv.ko" at 0xc09e6244.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc09e62f0.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc09e639c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09e6448.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP (1870.92-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536805376 (511 MB)
avail memory = 515575808 (491 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdeb0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 1 INTA is routed to irq 4
pcib0: slot 4 INTA is routed to irq 10
pcib0: slot 5 INTA is routed to irq 3
pcib0: slot 6 INTA is routed to irq 7
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
nv0: <NVIDIA nForce MCP2 Networking Adapter> port 0xb000-0xb007 mem 0xe7084000-0xe7084fff irq 10 at device 4.0 on pci0
nv0: Ethernet address 00:50:8d:f1:b3:48
miibus0: <MII bus> on nv0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pcm0: <Nvidia nForce2> port 0xb800-0xb87f,0xb400-0xb4ff mem 0xe7080000-0xe7080fff irq 7 at device 6.0 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 7 INTA is routed to irq 5
pcib1: slot 7 INTA is routed to irq 5
pcib1: slot 11 INTA is routed to irq 11
pci1: <multimedia, video> at device 7.0 (no driver attached)
pci1: <multimedia> at device 7.1 (no driver attached)
atapci0: <SiI 3112 SATA150 controller> port 0xa000-0xa00f,0x9c00-0x9c03,0x9800-0x9807,0x9400-0x9403,0x9000-0x9007 mem 0xe5000000-0xe50001ff irq 11 at device 11.0 on pci1
atapci0: [MPSAFE]
ata2: at 0xe5000000 on atapci0
ata2: [MPSAFE]
ata3: at 0xe5000000 on atapci0
ata3: [MPSAFE]
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 5
nvidia0: <GeForce3 Ti 200> mem 0xe0000000-0xe007ffff,0xdc000000-0xdfffffff,0xd4000000-0xd4ffffff irq 5 at device 0.0 on pci2
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
orm0: <Option ROMs> at iomem 0xce000-0xd27ff,0xcc000-0xcd7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1870919605 Hz quality 800
Timecounters tick every 10.000 msec
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0122> at ata0-master UDMA66
acd1: CDRW <LITE-ON LTR-24102B> at ata1-master UDMA33
GEOM: create disk ad4 dp=0xc4465a60
ad4: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata2-master UDMA100
GEOM: create disk cd0 dp=0xc454b600
GEOM: create disk cd1 dp=0xc454ae00
cd1 at ata1 bus 0 target 0 lun 0
cd1: <LITE-ON LTR-24102B 5S5A> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-106 1.22> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad4s2a
cd9660: Joliet Extension (Level 3)
cd9660: Joliet Extension (Level 3)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040114205929.0b63002a.matti>