Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 12 Sep 2003 00:20:58 +0100
From:      Ian Morrison <ian@darq.net>
To:        current@freebsd.org
Subject:   Page fault on boot when probing IBM ServeRAID Adapter on Netfinity 4000R
Message-ID:  <20030911232057.GB14389@phear.darq.net>

next in thread | raw e-mail | index | archive | help
hi,

i've just got hold of an IBM Netfinity 4000R system (8653-45Y) which
uses an IBM ServeRaid-3L to control two 9 gig disks.  Drives are set up
as a standard mirror, and online.  Booting from 5.1-RELEASE and the
latest snapshot i could find both result in a kernel panic on boot.

i've included the dmesg for both kernels below, and would be grateful
if anyone could offer any advice.

many thanks,


ian



Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT-20030908-JPSNAP #0: Mon Sep  8 03:26:52 GMT 2003
    root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b41000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0b41200.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (745.00-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x681  Stepping =3D 1
  Features=3D0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  =3D 1073741824 (1024 MB)
avail memory =3D 1031286784 (983 MB)
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0707670
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at devic=
e 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 o=
n pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3000-0x301f at devi=
ce 7.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem 0xfea00000-0xfe=
afffff,0xfebff000-0xfebfffff irq 10 at device 17.0 on pci0
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0x4080
fxp0: EEPROM checksum @ 0x3f: 0xd29 -> 0xd29
fxp0: Ethernet address 00:06:29:de:b9:ac
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3080-0x30bf mem 0xfe900000-0xfe=
9fffff,0xfebfe000-0xfebfefff irq 11 at device 18.0 on pci0
fxp1: Disabling dynamic standby mode in EEPROM
fxp1: New EEPROM ID: 0x4080
fxp1: EEPROM checksum @ 0x3f: 0xe29 -> 0xe29
fxp1: Ethernet address 00:06:29:de:b9:ab
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <PCI-PCI bridge> at device 20.0 on pci0
pci2: <PCI bus> on pcib2
ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem 0xfe000000-0xfe0fffff =
irq 9 at device 15.0 on pci2
ips0: reinitializing adapter, this could take several minutes.
ips0: logical drives: 222
ipsd0: <Logical Drive> on ips0
GEOM: create disk ipsd0 dp=3D0xc6588b90
ipsd0: Logical Drive  (1824184MB)
ipsd1: <Logical Drive> on ips0
GEOM: create disk ipsd1 dp=3D0xc6588a90
ipsd1: Logical Drive  (1824184MB)
ipsd2: <Logical Drive> on ips0
GEOM: create disk ipsd2 dp=3D0xc6588990
ipsd2: Logical Drive  (1824184MB)
ipsd3: <Logical Drive> on ips0
GEOM: create disk ipsd3 dp=3D0xc6588890
ipsd3: Logical Drive  (1824184MB)
ipsd4: <Logical Drive> on ips0
GEOM: create disk ipsd4 dp=3D0xc6588790
Memory modified after free 0xc65aa080(124)
panic: Most recently used by none

Debugger("panic")
Stopped at      Debugger+0x54:  xchgl   %ebx,in_Debugger.0
db> reset
=00=00=00=00=80=80=00=80=80=80=00=00=00=00=F8=F8=80=00=FE=F8=80=80=00=98=00=
=E6=00=F8DS=00=00=00Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT 2003
    root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ac1000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0ac1200.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 744995420 Hz
CPU: Intel Pentium III (745.00-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x681  Stepping =3D 1
  Features=3D0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  =3D 1073741824 (1024 MB)
avail memory =3D 1031827456 (984 MB)
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06877a4
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at devic=
e 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 o=
n pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3000-0x301f at devi=
ce 7.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x3040-0x307f=
 mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 10 at device 17.0 on p=
ci0
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0x4080
fxp0: EEPROM checksum @ 0x3f: 0xd29 -> 0xd29
fxp0: Ethernet address 00:06:29:de:b9:ac
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x3080-0x30bf=
 mem 0xfe900000-0xfe9fffff,0xfebfe000-0xfebfefff irq 11 at device 18.0 on p=
ci0
fxp1: Disabling dynamic standby mode in EEPROM
fxp1: New EEPROM ID: 0x4080
fxp1: EEPROM checksum @ 0x3f: 0xe29 -> 0xe29
fxp1: Ethernet address 00:06:29:de:b9:ab
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <PCI-PCI bridge> at device 20.0 on pci0
pci2: <PCI bus> on pcib2
ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem 0xfe000000-0xfe0fffff =
irq 9 at device 15.0 on pci2
ips0: reinitializing adapter, this could take several minutes.
ips0: logical drives: 0


Fatal trap 12: page fault while in kernel mode
fault virtual address	=3D 0xffddc399
fault code		=3D supervisor read, page not present
instruction pointer	=3D 0x8:0xc031ce94
stack pointer	        =3D 0x10:0xc0ae3c14
frame pointer	        =3D 0x10:0xc0ae3c24
code segment		=3D base 0x0, limit 0xfffff, type 0x1b
			=3D DPL 0, pres 1, def32 1, gran 1
processor eflags	=3D interrupt enabled, resume, IOPL =3D 0
current process		=3D 0 (swapper)
trap number		=3D 12
panic: page fault
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.

--=20
:: darq.net /#/             :: wishes into horses



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030911232057.GB14389>