Date: Mon, 18 Aug 2003 07:24:24 -0500 From: <Jack.W.Parks@alltel.com> To: <Tomi.Vainio@Sun.COM>, <freebsd-current@freebsd.org>, <freebsd-mobile@freebsd.org> Subject: RE: an driver / Cisco Aironet 340 stopped working Message-ID: <E48E8C0EEF927044A086E4A4BB228CFE09B432@litexch7.alltel.com>
next in thread | raw e-mail | index | archive | help
Don't know if anyone replied yet since I don't subscribe to
freebsd-current, but I had to add the following line to my
/boot/loader.conf file.
hw.pci.allow_unsupported_io_range=3D"1"
Jack
-----Original Message-----
From: Tomi Vainio - Sun Finland [mailto:Tomi.Vainio@Sun.COM]=20
Sent: Saturday, August 16, 2003 4:27 PM
To: freebsd-current@freebsd.org; freebsd-mobile@freebsd.org
Subject: an driver / Cisco Aironet 340 stopped working
I've used my Cisco WLAN with Toshiba Portege 3440 couple years but now
it's broken. I just upgraded to new Toshiba Tecra M1 and reinstalled
FreeBSD there and now I get "an0: record length mismatch -- expected
430, got 440 for Rid ff68" errors. I already tried with old laptop with
latest kernel and old kernel from Jun 26th but it's also broken there so
I cannot say who long this has been broken.
Tomppa
fwe0: flags=3D8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
inet6 fe80::39ff:fe34:7ff2%fwe0 prefixlen 64 scopeid 0x1=20
ether 02:00:39:34:7f:f2
ch 1 dma 0
em0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3D3<RXCSUM,TXCSUM>
inet6 fe80::208:dff:feda:ec61%em0 prefixlen 64 scopeid 0x2=20
inet 212.226.167.247 netmask 0xfffffff0 broadcast
212.226.167.255
inet6 2001:670:82:babe:208:dff:feda:ec61 prefixlen 64 tentative
autoconf=20
ether 00:08:0d:da:ec:61
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128=20
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3=20
inet 127.0.0.1 netmask 0xff000000=20
an0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::240:96ff:fe38:56e7%an0 prefixlen 64 scopeid 0x4=20
ether 00:40:96:38:56:e7
media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
status: associated
ssid AsOlA 1:AsOlA
stationname phb
channel 6 authmode OPEN powersavemode CAM powersavesleep 200
wepmode ON weptxkey 1
wepkey 1:128-bit
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved. FreeBSD 5.1-CURRENT #3: Sat Aug 16 20:28:39 EEST 2003
tomppa@phb.bert.sun.fi:/u/F/local/sup/5.0/sys/i386/compile/PHB
acpi_alloc_wakeup_handler: unable to allocate wake memory Preloaded elf
kernel "/boot/kernel/kernel" at 0xc0650000. Preloaded elf module
"/boot/kernel/splash_bmp.ko" at 0xc06502e4. Preloaded elf module
"/boot/kernel/vesa.ko" at 0xc0650394. Preloaded splash_image_data
"/boot/splash.bmp" at 0xc0650440. Preloaded elf module
"/boot/kernel/usb.ko" at 0xc0650490. Preloaded elf module
"/boot/kernel/ukbd.ko" at 0xc0650538. Preloaded elf module
"/boot/kernel/ums.ko" at 0xc06505e4. Preloaded elf module
"/boot/kernel/umass.ko" at 0xc065068c. Preloaded elf module
"/boot/kernel/random.ko" at 0xc0650738. Calibrating clock(s) ... i8254
clock: 1193183 Hz Timecounter "i8254" frequency 1193183 Hz quality 0
Calibrating TSC clock ... TSC clock: 1396507980 Hz
CPU: Intel(R) Pentium(R) M processor 1400MHz (1396.51-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x695 Stepping =3D 5
=20
Features=3D0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMO=
V
,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory =3D 536674304 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000677000 - 0x000000001f692fff, 520208384 bytes (127004 pages)
avail memory =3D 513142784 (489 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f0240
bios32: Entry =3D 0xfc0e3 (c00fc0e3) Rev =3D 0 Len =3D 1
pcibios: PCI BIOS entry at 0xf0000+0xd641
pnpbios: Found PnP BIOS data at 0xc00f0450
pnpbios: Entry =3D f0000:9138 Rev =3D 1.0
pnpbios: Event flag at 510
pnpbios: OEM ID 8938f351
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 02 00 01 00 01 01 00 00 00 40 00=20
00 01 00 02 00 02 13 01 00 01 2d 01 00 01 38 01=20
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00=20
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00=20
VESA: 31 mode(s) found
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc053aca0 (1000040)
VESA: Trident CYBER 2100
VESA: TRIDENT MICROSYSTEMS INC. CYBER 2100 RXT 7.3 (16.28) =20
random: <entropy source>
splash: image@0xc053be60, size:787506
splash_bmp: beyond screen capacity (1024x768, 255 colors)
splash_bmp: beyond screen capacity (1024x768, 255 colors)
bmp_start(): splash_mode:261
splash: image decoder found: splash_bmp
acpi0: <TOSHIB 750 > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D33408086)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f01a0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 31 A 0x62 11
embedded 0 31 B 0x61 11
embedded 0 29 A 0x60 11
embedded 0 29 B 0x63 11
embedded 0 29 C 0x62 11
embedded 0 29 D 0x6b 11
embedded 2 11 A 0x60 11
embedded 2 11 B 0x63 11
embedded 1 0 A 0x6a 11
embedded 2 10 A 0x63 11
embedded 2 10 B 0x60 11
embedded 2 13 A 0x60 11
embedded 2 7 A 0x69 11
embedded 2 9 A 0x68 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min =3D 3, max =3D 189, width =3D 186 ACPI timer =
looks
GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, =
max =3D 3,
width =3D 0 ACPI timer looks BAD min =3D 3, max =3D 382, width =3D 379 =
ACPI
timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD =
min =3D
3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =3D 3, =
width =3D 0
ACPI timer looks GOOD min =3D 3, max =3D 3, width =3D 0 ACPI timer looks =
GOOD
min =3D 3, max =3D 3, width =3D 0 ACPI timer looks GOOD min =3D 3, max =
=3D 3,
width =3D 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.31.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 0.29.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
map[10]: type 3, range 32, base c0000000, size 28, enabled
found-> vendor=3D0x8086, dev=3D0x3340, revid=3D0x03
bus=3D0, slot=3D0, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x3341, revid=3D0x03
bus=3D0, slot=3D1, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x00a0, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 (0
ns)
map[20]: type 4, range 32, base 0000efe0, size 5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x24c2, revid=3D0x03
bus=3D0, slot=3D29, func=3D0
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D11
map[20]: type 4, range 32, base 0000ef80, size 5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x24c4, revid=3D0x03
bus=3D0, slot=3D29, func=3D1
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
map[20]: type 4, range 32, base 0000ef60, size 5, enabled
pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x24c7, revid=3D0x03
bus=3D0, slot=3D29, func=3D2
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dc, irq=3D11
map[10]: type 1, range 32, base dfeffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH)
pcib0: slot 29 INTD is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x24cd, revid=3D0x03
bus=3D0, slot=3D29, func=3D7
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Dd, irq=3D11
powerspec 2 supports D0 D3 current D0
found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0x83
bus=3D0, slot=3D30, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x8080, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found-> vendor=3D0x8086, dev=3D0x24cc, revid=3D0x03
bus=3D0, slot=3D31, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
map[10]: type 4, range 32, base 0000bff8, size 3, enabled
map[14]: type 4, range 32, base 0000bff4, size 2, enabled
map[18]: type 4, range 32, base 0000bfe8, size 3, enabled
map[1c]: type 4, range 32, base 0000bfe4, size 2, enabled
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
pcib0: matched entry for 0.31.INTA (source \\_SB_.LNKC)
pcib0: slot 31 INTA is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x24ca, revid=3D0x03
bus=3D0, slot=3D31, func=3D1
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0280, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D11
map[10]: type 4, range 32, base 0000be00, size 8, enabled
map[14]: type 4, range 32, base 0000bdc0, size 6, enabled
map[18]: type 1, range 32, base dfcffe00, size 9, enabled
map[1c]: type 1, range 32, base dfcffd00, size 8, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x24c5, revid=3D0x03
bus=3D0, slot=3D31, func=3D5
class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ba00, size 8, enabled
map[14]: type 4, range 32, base 0000b980, size 7, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x24c6, revid=3D0x03
bus=3D0, slot=3D31, func=3D6
class=3D07-03-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D11
powerspec 2 supports D0 D3 current D0
agp0: <Intel 82855 host to AGP bridge> mem 0xc0000000-0xcfffffff at
device 0.0 on pci0
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xdff00000-0xf7ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 1.0.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKG irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 1.0.0
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
map[10]: type 1, range 32, base f0000000, size 27, enabled
map[14]: type 1, range 32, base efc00000, size 22, enabled
map[18]: type 1, range 32, base e0000000, size 27, enabled
map[1c]: type 1, range 32, base dfff8000, size 15, enabled
pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKG)
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=3D0x1023, dev=3D0x2100, revid=3D0x91
bus=3D1, slot=3D0, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D0 (dwords)
lattimer=3D0x08 (240 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xefe0-0xefff
irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xef80-0xef9f
irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xef60-0xef7f
irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfeffc00-0xdfefffff irq
11 at device 29.7 on pci0
ehci0: (New EHCI DeviceId=3D0x24cd8086)
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 5
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xdfd00000-0xdfdfffff
pcib2: prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.1
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.13.0
\\_SB_.LNKF irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.7.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.9.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.0
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.11.1
\\_SB_.LNKD irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.10.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.13.0
\\_SB_.LNKF irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.7.0
\\_SB_.LNKE irq 11: [ 3 4 5 6 7 10 11] low,level,sharable 2.9.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=3D2
map[10]: type 1, range 32, base dfdff800, size 11, enabled
map[14]: type 1, range 32, base dfdf8000, size 14, enabled
pcib2: matched entry for 2.7.INTA (source \\_SB_.LNKF)
pcib2: slot 7 INTA is routed to irq 11
found-> vendor=3D0x104c, dev=3D0x8023, revid=3D0x00
bus=3D2, slot=3D7, func=3D0
class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x04 (1000
ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dfdc0000, size 17, enabled
map[18]: type 4, range 32, base 0000cf40, size 6, enabled
pcib2: matched entry for 2.9.INTA (source \\_SB_.LNKE)
pcib2: slot 9 INTA is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x1016, revid=3D0x03
bus=3D2, slot=3D9, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0xff (63750 ns), maxlat=3D0x00 (0
ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base dfdbf000, size 12, enabled
pcib2: matched entry for 2.10.INTA (source \\_SB_.LNKD)
pcib2: slot 10 INTA is routed to irq 11
found-> vendor=3D0x8086, dev=3D0x1043, revid=3D0x04
bus=3D2, slot=3D10, func=3D0
class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D8 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x22 (8500
ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D3 current D0
found-> vendor=3D0x1179, dev=3D0x0617, revid=3D0x32
bus=3D2, slot=3D11, func=3D0
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0490, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D255
powerspec 1 supports D0 D3 current D0
found-> vendor=3D0x1179, dev=3D0x0617, revid=3D0x32
bus=3D2, slot=3D11, func=3D1
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0490, cachelnsz=3D0 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Db, irq=3D255
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base dfdbee00, size 9, enabled
pcib2: matched entry for 2.13.INTA (source \\_SB_.LNKA)
pcib2: slot 13 INTA is routed to irq 11
found-> vendor=3D0x1179, dev=3D0x0805, revid=3D0x03
bus=3D2, slot=3D13, func=3D0
class=3D08-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0002, statreg=3D0x0210, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xdfdf8000-0xdfdfbfff,0xdfdff800-0xdfdfffff irq 11 at device 7.0 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range
0xdfdff800-0xdfdfffff
fwohci0: OHCI version 1.10 (ROM=3D1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:39:00:00:34:7f:f2
fwohci0: resetting OHCI...done (loop=3D0)
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xa002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:39:34:7f:f2
fwe0: bpf attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=3D1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: fwphy_rddata: loop=3D0, retry=3D0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=3D0xc000ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=3D0)
firewire0: bus manager 0 (me)
send phy_config root_node=3D-1 gap_count=3D5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=3D0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.6.6> port
0xcf40-0xcf7f mem 0xdfdc0000-0xdfddffff irq 11 at device 9.0 on pci2
pcib2: device em0 requested decoded memory range 0xdfdc0000-0xdfddffff
pcib2: device em0 requested decoded I/O range 0xcf40-0xcf7f
em0: bpf attached
em0: Speed:N/A Duplex:N/A
pci2: <network> at device 10.0 (no driver attached)
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2
pcib2: device cbb0 requested decoded memory range 0xdfd00000-0xdfdfffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: matched entry for 2.11.INTA (source \\_SB_.LNKA)
pcib2: slot 11 INTA is routed to irq 11
cbb0: PCI Configuration space:
0x00: 0x06171179 0x04900007 0x06070032 0x00824000=20
0x10: 0xdfd00000 0x04800080 0x00040402 0xfffff000=20
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b=20
0x40: 0x00011179 0x00000001 0x00000000 0x00000000=20
0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x80: 0x00010001 0x00800000 0x00000000 0x01000000=20
0x90: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xa0: 0x860011f0 0x0c000000 0x00000000 0x0000d100=20
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00=20
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000=20
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008=20
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci2
pcib2: device cbb1 requested decoded memory range 0xdfd00000-0xdfdfffff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib2: matched entry for 2.11.INTB (source \\_SB_.LNKD)
pcib2: slot 11 INTB is routed to irq 11
cbb1: PCI Configuration space:
0x00: 0x06171179 0x04900007 0x06070032 0x00824000=20
0x10: 0xdfd01000 0x04800080 0x00050502 0xfffff000=20
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc=20
0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b=20
0x40: 0x00011179 0x00000001 0x00000000 0x00000000=20
0x50: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x60: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x70: 0x00000000 0x00000000 0x00000000 0x00000000=20
0x80: 0x00010001 0x00800000 0x00000000 0x01000000=20
0x90: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xa0: 0x860021f0 0x0c000000 0x00000000 0x0000d100=20
0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00=20
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xd0: 0x00040000 0x00000000 0x00000000 0x00000000=20
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000=20
0xf0: 0x00000000 0x00000000 0x00000000 0x00000008=20
pci2: <base peripheral> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0xbfe4-0xbfe7,0xbfe8-0xbfef,0xbff4-0xbff7,0xbff8-0xbfff
irq 11 at device 31.1 on pci0
ata0: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=3D03 stat0=3D50 stat1=3D00
ata0-master: ATA 01 a5
ata0: devices=3D01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=3D03 stat0=3D00 stat1=3D00
ata1: devices=3D04
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbdc0-0xbdff,0xbe00-0xbeff mem
0xdfcffd00-0xdfcffdff,0xdfcffe00-0xdfcfffff irq 11 at device 31.5 on
pci0
pcm0: <Analog Devices AD1981B AC97 Codec (id =3D 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D
Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved
4
pcm0: sndbuf_setmap a56000, 4000; 0xe5e4b000 -> a56000
pcm0: sndbuf_setmap a79000, 4000; 0xe5e4f000 -> a79000
pci0: <simple comms> at device 31.6 (no driver attached)
unknown: not probed (disabled)
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x801 0x811 0x801 0x801
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xc0000-0xcbfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x801 0x801 0x801 0x801
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:261
fb0: window:0xe5e8a000 size:32768k gran:32768k, buf:0xe5e8a000
size:32768k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67
5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1396507980 Hz quality 800 Timecounters tick
every 10.000 msec
lo0: bpf attached
em0: Link is up 100 Mbps Full Duplex
acpi_cmbat0: battery initialization start
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ad0: success setting UDMA100 on Intel ICH4 chip
ad0: <TOSHIBA MK4019GAX/FA003E> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=3D12 dmamode=3D34 udmamode=3D69 cblid=3D1
GEOM: new disk ad0
bus_explore done
sbp_post_explore (sbp_cold=3D2)
ar: FreeBSD check1 failed
ata1-master: piomode=3D12 dmamode=3D34 udmamode=3D66 dmaflag=3D1
ata1-master: success setting PIO4 on Intel ICH4 chip
acd0: <DW-224E/7.0B> CD-RW drive at ata1 as master
acd0: read 4134KB/s (34515KB/s) write 4134KB/s (4134KB/s), 1658KB
buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes: CD-R, CD-RW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm photo disc
pcm0: measured ac97 link rate at 48001 Hz, will use 48000 Hz [0] f:00
typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:53416062 [1] f:00 typ:6
s(CHS):1023/255/63 e(CHS):1023/254/63 s:53416125 l:16370235 [2] f:80
typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69786360 l:7197120 [3]
f:00 typ:6 s(CHS):1023/255/63 e(CHS):1023/254/63 s:76983480 l:1156680
GEOM: Configure ad0s1, start 32256 length 27349023744 end 27349055999
GEOM: Configure ad0s2, start 27349056000 length 8381560320 end
35730616319
GEOM: Configure ad0s3, start 35730616320 length 3684925440 end
39415541759
GEOM: Configure ad0s4, start 39415541760 length 592220160 end
40007761919
GEOM: Configure ad0s3a, start 536870912 length 3148054528 end 3684925439
GEOM: Configure ad0s3b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s3c, start 0 length 3684925440 end 3684925439
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
start IR DMA 0x0
fwohci0: maxdesc: 3
em0: Link is up 100 Mbps Full Duplex
fwohci0: maxdesc: 5
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 30 func 0
em0: Link is up 100 Mbps Full Duplex
acpi_cmbat0: battery initialization failed, giving up
acpi_cmbat1: battery initialization failed, giving up
pcib2: device pccard1 requested decoded memory range
0xdfd00000-0xdfdfffff
pccard1: CIS version PCCARD 2.0 or 2.1
pccard1: CIS info: Cisco Systems, 340 Series Wireless LAN Adapter
pccard1: Manufacturer code 0x15f, product 0x7
pccard1: function 0: network adapter, ccr addr 3e0 mask 7
pccard1: function 0, config table entry 5: I/O card; irq mask ffff;
iomask 6, iospace 0-3f; io16 irqlevel
pcib2: device pccard1 requested decoded I/O range 0x100-0xffffffff
pcib2: device pccard1 requested decoded memory range
0xdfd00000-0xdfdfffff
an0: <Cisco Systems 340 Series Wireless LAN Adapter> at port 0x100-0x13f
irq 11 function 0 config 5 on pccard1
pcib2: device an0 requested decoded I/O range 0x100-0x13f
an0: record length mismatch -- expected 104, got 852 for Rid ff11
pcib2: device pccard1 requested decoded I/O range 0x100-0x13f
pcib2: device an0 requested decoded I/O range 0x100-0x13f
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 132, got 176 for Rid ff00
an0: record length mismatch -- expected 104, got 852 for Rid ff11
an0: got RSSI <-> dBM map
an0: Ethernet address: 00:40:96:38:56:e7
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: bpf attached
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 156, got 182 for Rid ff20
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 156, got 182 for Rid ff10
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: record length mismatch -- expected 138, got 144 for Rid ff50
an0: record length mismatch -- expected 430, got 440 for Rid ff68
an0: RID access failed
an0: RID access failed
pcib2: device pccard1 requested decoded I/O range 0x100-0x13f
an0: detached
_______________________________________________
freebsd-mobile@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to
"freebsd-mobile-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E48E8C0EEF927044A086E4A4BB228CFE09B432>