Date: Mon, 8 Oct 2001 16:14:49 +0200 From: Xride <xride@www.eit.ihk-edu.dk> To: stable@freebsd.org Subject: Re: My Xircom driver not work on 4.4 Message-ID: <20011008161449.A12978@www.eit.ihk-edu.dk> In-Reply-To: <20011008111231.47914.qmail@web20403.mail.yahoo.com>; from huanghwh@yahoo.com on Mon, Oct 08, 2001 at 04:12:31AM -0700 References: <20011008111231.47914.qmail@web20403.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I have the same problems on a Compaq Armada 7400 with the same nic
On Mon, Oct 08, 2001 at 04:12:31AM -0700, huang wen hui wrote:
> Hi,
> I install FreeBSD 4.4 on my ThinkPad 600 and I have
> "Xircom CreditCard Ethernet CE3-10/100",
> The xe driver does not work on 4.4. It was work on
> 4.3. Here is my configuration:
>
> rc.conf:
>
> kern_securelevel_enable="NO"
> moused_enable="YES"
> nfs_reserved_port_only="YES"
> sshd_enable="YES"
> usbd_enable="YES"
> pccard_ifconfig="xe0"
> pccard_enable="YES"
> sendmail_enable="NO"
> ifconfig_xe0="inet 192.168.1.10 netmask
> 255.255.255.0"
> defaultrouter="192.168.1.1"
> hostname="IBM01.gdvnet.com"
>
> /etc/pccard.conf:
>
> irq 3 9 10 11
> # Available memory slots
> memory 0xd0000 96k
> # Debug level, so you know how to get more info for
> maintainers. Put it
> # in /etc/pccard.conf
> debuglevel 4
> # Xircom CreditCard Ethernet CE3-10/100
> card "Xircom" "CreditCard 10/100"
> config auto "xe" 10
> insert /etc/pccard_ether $device start
> remove /etc/pccard_ether $device stop
>
> dmesg:
>
> Copyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
> 1991, 1992, 1993, 1994
> The Regents of the University of California. All
> rights reserved.
> FreeBSD 4.4-STABLE #3: Wed Oct 3 17:19:22 CST 2001
> root@IBM01.gdvnet.com:/usr/src/sys/compile/IBM01
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium II/Pentium II Xeon/Celeron (298.42-MHz
> 686-class CPU)
> Origin = "GenuineIntel" Id = 0x652 Stepping = 2
>
> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> real memory = 134021120 (130880K bytes)
> avail memory = 126836736 (123864K bytes)
> Preloaded elf kernel "kernel" at 0xc0398000.
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> pcibios: No call entry point
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Intel 82443BX host to PCI bridge (AGP
> disabled)> on motherboard
> pci0: <PCI bus> on pcib0
> pcic0: <TI PCI-1250 PCI-CardBus Bridge> mem
> 0x20301000-0x20301fff at device 2.0 on pci0
> pcic0: Polling mode
> pcic0: TI12XX PCI Config Reg: [ring enable][speaker
> enable][pwr save][CSC parallel isa irq]
> pccard0: <PC Card bus (classic)> on pcic0
> pcic1: <TI PCI-1250 PCI-CardBus Bridge> mem
> 0x20300000-0x20300fff at device 2.1 on pci0
> pcic1: Polling mode
> pcic1: TI12XX PCI Config Reg: [ring enable][speaker
> enable][pwr save][CSC parallel isa irq]
> pccard1: <PC Card bus (classic)> on pcic1
> pci0: <NeoMagic MagicGraph 128XD SVGA controller> at
> 3.0 irq 11
> isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0
> on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX4 ATA33 controller> port
> 0xfcf0-0xfcff at device 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
> 0x8400-0x841f irq 11 at device 7.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on
> uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
> addr 1
> uhub0: 2 ports with 2 removable, self powered
> chip1: <Intel 82371AB Power management controller>
> port 0xefa0-0xefaf at device 7.3 on pci0
> orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
> irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> atkbdc0: <Keyboard controller (i8042)> at port
> 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sbc0: <SoundBlaster Pro> at port 0x220-0x22f irq 5 drq
> 1 flags 0x15 on isa0
> pcm0: <SB DSP 3.02> on sbc0
> pca0 at port 0x40 on isa0
> IP Filter: v3.4.20 initialized. Default = block all,
> Logging = enabled
> ad0: 4887MB <IBM-DADA-25120> [10592/15/63] at
> ata0-master UDMA33
> acd0: CDROM <TOSHIBA CD-ROM XM-1902B> at ata1-master
> using PIO4
> Mounting root from ufs:/dev/ad0s1a
> pccard: card inserted, slot 0
>
> Error msg:
>
> Oct 3 17:38:45 IBM01 /kernel: pccard: card inserted,
> slot 0
> Oct 3 17:38:52 IBM01 pccardd[81]: Card
> "Xircom"("CreditCard 10/100") [CE3-10/100] [1.00]
> matched "Xircom" ("CreditCard 10/100") [(null)]
> [(null)]
> Oct 3 17:38:52 IBM01 pccardd[81]: Card
> "Xircom"("CreditCard 10/100") [CE3-10/10
> 0] [1.00] matched "Xircom" ("CreditCard 10/100")
> [(null)] [(null)]
>
> Oct 3 17:38:52 IBM01 pccardd[81]: Found existing
> driver (xe) for Xircom
> Oct 3 17:38:52 IBM01 pccardd[81]: Using mem addr
> 0xd0000, size 4096, card addr0x0, flags 0x41
> Oct 3 17:38:52 IBM01 pccardd[81]: Using I/O addr
> 0x240, size 16
> Oct 3 17:38:52 IBM01 pccardd[81]: Setting config reg
> at offs 0x800 to 0x41, Reset time = 50 ms
> Oct 3 17:38:57 IBM01 pccardd[81]: Assigning I/O
> window 0, start 0x240, size 0x10 flags 0x7
> Oct 3 17:38:57 IBM01 pccardd[81]: Assign xe0, io
> 0x240-0x24f, mem 0xd0000, 4096 bytes, irq 10, flags 0
> Oct 3 17:38:57 IBM01 pccardd[81]: driver allocation
> failed for Xircom(CreditCard 10/100): Device not
> configured
>
>
> __________________________________________________
> Do You Yahoo!?
> NEW from Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month.
> http://geocities.yahoo.com/ps/info1
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
--
Best regards Soren.
xride@eit.ihk-edu.dk
"Why use M$ when you can get FreeBSD for the download.."
\ /
X ASCII ribbon campaign--
/ \ against HTML mail
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011008161449.A12978>