Date: Wed, 25 Apr 2007 19:14:50 -0300 From: freenity <antonmaster@gmail.com> To: freebsd-questions@freebsd.org Subject: Re: problem while setting refresh rate in xorg Message-ID: <1455a3d90704251514m40d09651mf125a5a530f713f4@mail.gmail.com> In-Reply-To: <462F9349.4070706@daleco.biz> References: <1455a3d90704251008m53a519f5ud60674c9911b5982@mail.gmail.com> <462F9349.4070706@daleco.biz>
next in thread | previous in thread | raw e-mail | index | archive | help
In Xorg.0.log what I found about graphical initialization was this:
=================================================
(II) Setting vga for screen 0.
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
(==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction ( 1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6100 at PCI:0:5:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.51.22.26.08
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6100 at PCI:0:5:0:
(--) NVIDIA(0): LG L1740B (CRT-0)
(--) NVIDIA(0): LG L1740B (CRT-0): 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0):
(WW) NVIDIA(0): No modes were requested; the default mode
"nvidia-auto-select"
(WW) NVIDIA(0): will be used as the requested mode.
(WW) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B]
[2] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xfebdc000 - 0xfebdcfff (0x1000) MX[B]E
[9] -1 0 0xfebd8000 - 0xfebdbfff (0x4000) MX[B]E
[10] -1 0 0xfebdd000 - 0xfebddfff (0x1000) MX[B]E
[11] -1 0 0xfebdfc00 - 0xfebdffff (0x400) MX[B]E
[12] -1 0 0xfebde000 - 0xfebdefff (0x1000) MX[B]E
[13] -1 0 0xfebe0000 - 0xfebfffff (0x20000) MX[B](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
[16] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]E
[23] -1 0 0x0000e000 - 0x0000e07f (0x80) IX[B]E
[24] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]E
[25] -1 0 0x0000e400 - 0x0000e47f (0x80) IX[B]E
[26] -1 0 0x0000e480 - 0x0000e4ff (0x80) IX[B]E
[27] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]E
[28] -1 0 0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
[29] -1 0 0x00000700 - 0x000007ff (0x100) IX[B]E
[30] -1 0 0x00000600 - 0x000006ff (0x100) IX[B]E
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
===============================================
I put this modeline generated by
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl but it still the same 50hz
Modeline "768x1024@75" 96.84 768 800 1160 1192 1024 1043 1056 1076
On 4/25/07, Kevin Kinsey <kdk@daleco.biz> wrote:
>
> freenity wrote:
> > Hi.
> > I have just installed the nvidia drivers on my FBSD6.2 i386. It work
> fine
> > but I cant set my refresh rate at 75, it sets at 50 with a resolution
> > 1280x1024. The monitor is LG Flatron L1740B and my video card is Geforce
>
> > 6100.
> > Here is my xorg.conf file:
> > Thanks for any help.
> >
>
> I just allow DDC to do its thing; also,
> /var/log/Xorg.0.log might have some clues ---
> for example, what modelines are discovered for
> your hardware set?
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1455a3d90704251514m40d09651mf125a5a530f713f4>