Date: Wed, 1 Feb 2012 20:20:10 GMT From: Allen Belletti <allen@gtf.org> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/164694: Regression in 3726 port multiplier support in 9.0 Message-ID: <201202012020.q11KKAfn042668@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/164694; it has been noted by GNATS. From: Allen Belletti <allen@gtf.org> To: bug-followup@freebsd.org Cc: Subject: Re: kern/164694: Regression in 3726 port multiplier support in 9.0 Date: Wed, 01 Feb 2012 14:49:45 -0500 This is a multi-part message in MIME format. --------------050202040600020906070504 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Here are two log files which may be of use to investigate this problem. The first, "verbose", is taken from dmesg after doing a verbose boot of the 9.0 GENERIC kernel. Unfortunately the start is cut off (presumably due to kernel buffer size) but presumably that is fixable if needed. The second log file, "lastboot82", is a (non-verbose, since I no longer have a way to boot it) log from the last time I booted with 8.2 GENERIC. Note that this machine has three types of disk controllers, so the log is quite lengthy. There are six devices on the motherboard (ahci) and many devices connected via the mpt driver. Those are all working fine. Thanks, Allen --------------050202040600020906070504 Content-Type: text/plain; name="verbose" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="verbose" Jan 31 18:24:11 chimney syslogd: kernel boot file is /boot/kernel/kernel Jan 31 18:24:11 chimney kernel: s) Jan 31 18:24:11 chimney kernel: intpin=a, irq=10 Jan 31 18:24:11 chimney kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Jan 31 18:24:11 chimney kernel: MSI supports 1 message, 64 bit Jan 31 18:24:11 chimney kernel: MSI-X supports 1 message in map 0x14 Jan 31 18:24:11 chimney kernel: map[10]: type I/O Port, range 32, base 0xd000, size 8, enabled Jan 31 18:24:11 chimney kernel: pcib12: allocated I/O port range (0xd000-0xd0ff) for rid 10 of pci0:133:0:0 Jan 31 18:24:11 chimney kernel: map[14]: type Memory, range 64, base 0xf7bfc000, size 14, enabled Jan 31 18:24:11 chimney kernel: pcib12: allocated memory range (0xf7bfc000-0xf7bfffff) for rid 14 of pci0:133:0:0 Jan 31 18:24:11 chimney kernel: map[1c]: type Memory, range 64, base 0xf7be0000, size 16, enabled Jan 31 18:24:11 chimney kernel: pcib12: allocated memory range (0xf7be0000-0xf7beffff) for rid 1c of pci0:133:0:0 Jan 31 18:24:11 chimney kernel: pcib12: matched entry for 133.0.INTA Jan 31 18:24:11 chimney kernel: pcib12: slot 0 INTA hardwired to IRQ 54 Jan 31 18:24:11 chimney kernel: mpt1: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem 0xf7bfc000-0xf7bfffff,0xf7be0000-0xf7beffff irq 54 at device 0.0 on pci133 Jan 31 18:24:11 chimney kernel: mpt1: attempting to allocate 1 MSI-X vectors (1 supported) Jan 31 18:24:11 chimney kernel: msi: routing MSI-X IRQ 285 to local APIC 0 vector 83 Jan 31 18:24:11 chimney kernel: mpt1: using IRQ 285 for MSI-X Jan 31 18:24:11 chimney kernel: mpt1: MPI Version=1.5.19.0 Jan 31 18:24:11 chimney kernel: mpt1: chain depth limited to 34 (from 2040) Jan 31 18:24:11 chimney kernel: mpt1: Maximum Segment Count: 306, Maximum CAM Segment Count: 33 Jan 31 18:24:11 chimney kernel: mpt1: MsgLength=20 IOCNumber = 0 Jan 31 18:24:11 chimney kernel: mpt1: IOCFACTS: GlobalCredits=478 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 34 Jan 31 18:24:11 chimney kernel: mpt1: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2 Jan 31 18:24:11 chimney kernel: mpt1: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). Jan 31 18:24:11 chimney kernel: mpt1: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). Jan 31 18:24:11 chimney kernel: mpt1: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). Jan 31 18:24:11 chimney last message repeated 7 times Jan 31 18:24:11 chimney kernel: mpt1: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). Jan 31 18:24:11 chimney last message repeated 7 times Jan 31 18:24:11 chimney kernel: mpt1: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). Jan 31 18:24:11 chimney kernel: mpt1: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). Jan 31 18:24:11 chimney kernel: pcib13: <ACPI PCI-PCI bridge> at device 9.0 on pci128 Jan 31 18:24:11 chimney kernel: pcib7: allocated type 4 (0xe000-0xefff) for rid 1c of pcib13 Jan 31 18:24:11 chimney kernel: pcib7: allocated type 3 (0xf7c00000-0xf7ffffff) for rid 20 of pcib13 Jan 31 18:24:11 chimney kernel: pcib13: domain 0 Jan 31 18:24:11 chimney kernel: pcib13: secondary bus 134 Jan 31 18:24:11 chimney kernel: pcib13: subordinate bus 134 Jan 31 18:24:11 chimney kernel: pcib13: I/O decode 0xe000-0xefff Jan 31 18:24:11 chimney kernel: pcib13: memory decode 0xf7c00000-0xf7ffffff Jan 31 18:24:11 chimney kernel: pcib13: no prefetched decode Jan 31 18:24:11 chimney kernel: pci134: <ACPI PCI bus> on pcib13 Jan 31 18:24:11 chimney kernel: pci134: domain=0, physical bus=134 Jan 31 18:24:11 chimney kernel: found-> vendor=0x1000, dev=0x0058, revid=0x08 Jan 31 18:24:11 chimney kernel: domain=0, bus=134, slot=0, func=0 Jan 31 18:24:11 chimney kernel: class=01-00-00, hdrtype=0x00, mfdev=0 Jan 31 18:24:11 chimney kernel: cmdreg=0x0147, statreg=0x4010, cachelnsz=64 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: intpin=a, irq=10 Jan 31 18:24:11 chimney kernel: powerspec 2 supports D0 D1 D2 D3 current D0 Jan 31 18:24:11 chimney kernel: MSI supports 1 message, 64 bit Jan 31 18:24:11 chimney kernel: MSI-X supports 1 message in map 0x14 Jan 31 18:24:11 chimney kernel: map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled Jan 31 18:24:11 chimney kernel: pcib13: allocated I/O port range (0xe000-0xe0ff) for rid 10 of pci0:134:0:0 Jan 31 18:24:11 chimney kernel: map[14]: type Memory, range 64, base 0xf7ffc000, size 14, enabled Jan 31 18:24:11 chimney kernel: pcib13: allocated memory range (0xf7ffc000-0xf7ffffff) for rid 14 of pci0:134:0:0 Jan 31 18:24:11 chimney kernel: map[1c]: type Memory, range 64, base 0xf7fe0000, size 16, enabled Jan 31 18:24:11 chimney kernel: pcib13: allocated memory range (0xf7fe0000-0xf7feffff) for rid 1c of pci0:134:0:0 Jan 31 18:24:11 chimney kernel: pcib13: matched entry for 134.0.INTA Jan 31 18:24:11 chimney kernel: pcib13: slot 0 INTA hardwired to IRQ 56 Jan 31 18:24:11 chimney kernel: mpt2: <LSILogic SAS/SATA Adapter> port 0xe000-0xe0ff mem 0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 56 at device 0.0 on pci134 Jan 31 18:24:11 chimney kernel: mpt2: attempting to allocate 1 MSI-X vectors (1 supported) Jan 31 18:24:11 chimney kernel: msi: routing MSI-X IRQ 286 to local APIC 0 vector 84 Jan 31 18:24:11 chimney kernel: mpt2: using IRQ 286 for MSI-X Jan 31 18:24:11 chimney kernel: mpt2: MPI Version=1.5.19.0 Jan 31 18:24:11 chimney kernel: mpt2: chain depth limited to 34 (from 2040) Jan 31 18:24:11 chimney kernel: mpt2: Maximum Segment Count: 306, Maximum CAM Segment Count: 33 Jan 31 18:24:11 chimney kernel: mpt2: MsgLength=20 IOCNumber = 0 Jan 31 18:24:11 chimney kernel: mpt2: IOCFACTS: GlobalCredits=478 BlockSize=8 bytes Request Frame Size 128 bytes Max Chain Depth 34 Jan 31 18:24:11 chimney kernel: mpt2: IOCFACTS: Num Ports 1, FWImageSize 0, Flags=0x2 Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). Jan 31 18:24:11 chimney last message repeated 2 times Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not required). Jan 31 18:24:11 chimney last message repeated 2 times Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0xf (ACK not required). Jan 31 18:24:11 chimney last message repeated 5 times Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not required). Jan 31 18:24:11 chimney kernel: mpt2: No Handlers For Any Event Notify Frames. Event 0xa (ACK not required). Jan 31 18:24:11 chimney kernel: pci128: <base peripheral, interrupt controller> at device 16.0 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral, interrupt controller> at device 16.1 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral, interrupt controller> at device 17.0 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral, interrupt controller> at device 17.1 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral, interrupt controller> at device 20.0 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral, interrupt controller> at device 20.1 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral, interrupt controller> at device 20.2 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral, interrupt controller> at device 20.3 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral> at device 22.0 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral> at device 22.1 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral> at device 22.2 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral> at device 22.3 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral> at device 22.4 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral> at device 22.5 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral> at device 22.6 (no driver attached) Jan 31 18:24:11 chimney kernel: pci128: <base peripheral> at device 22.7 (no driver attached) Jan 31 18:24:11 chimney kernel: acpi_button0: <Power Button> on acpi0 Jan 31 18:24:11 chimney kernel: attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Jan 31 18:24:11 chimney kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Jan 31 18:24:11 chimney kernel: ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 85 Jan 31 18:24:11 chimney kernel: Event timer "i8254" frequency 1193182 Hz quality 100 Jan 31 18:24:11 chimney kernel: atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Jan 31 18:24:11 chimney kernel: atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s) Jan 31 18:24:11 chimney kernel: ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 86 Jan 31 18:24:11 chimney kernel: Event timer "RTC" frequency 32768 Hz quality 0 Jan 31 18:24:11 chimney kernel: uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Jan 31 18:24:11 chimney kernel: ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 87 Jan 31 18:24:11 chimney kernel: uart1: fast interrupt Jan 31 18:24:11 chimney kernel: hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Jan 31 18:24:11 chimney kernel: hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 4 timers, legacy route Jan 31 18:24:11 chimney kernel: hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic Jan 31 18:24:11 chimney kernel: hpet0: t1: irqs 0x00f00000 (0) Jan 31 18:24:11 chimney kernel: hpet0: t2: irqs 0x00f00800 (0) Jan 31 18:24:11 chimney kernel: hpet0: t3: irqs 0x00f01000 (0) Jan 31 18:24:11 chimney kernel: Timecounter "HPET" frequency 14318180 Hz quality 950 Jan 31 18:24:11 chimney kernel: ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 88 Jan 31 18:24:11 chimney kernel: Event timer "HPET" frequency 14318180 Hz quality 450 Jan 31 18:24:11 chimney kernel: Event timer "HPET1" frequency 14318180 Hz quality 440 Jan 31 18:24:11 chimney kernel: Event timer "HPET2" frequency 14318180 Hz quality 440 Jan 31 18:24:11 chimney kernel: Event timer "HPET3" frequency 14318180 Hz quality 440 Jan 31 18:24:11 chimney kernel: qpi0: <QPI system bus> on motherboard Jan 31 18:24:11 chimney kernel: pcib14: <QPI Host-PCI bridge> pcibus 255 on qpi0 Jan 31 18:24:11 chimney kernel: pci255: <PCI bus> on pcib14 Jan 31 18:24:11 chimney kernel: pci255: domain=0, physical bus=255 Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c40, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=0, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c01, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=0, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c10, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=2, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c11, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=2, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c14, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=2, func=4 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c15, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=2, func=5 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c18, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=3, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c19, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=3, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c1a, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=3, func=2 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c1c, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=3, func=4 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c20, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=4, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c21, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=4, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c22, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=4, func=2 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c23, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=4, func=3 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c28, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=5, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c29, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=5, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c2a, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=5, func=2 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c2b, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=5, func=3 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c30, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=6, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c31, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=6, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c32, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=6, func=2 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c33, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=255, slot=6, func=3 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: pcib15: <QPI Host-PCI bridge> pcibus 254 on qpi0 Jan 31 18:24:11 chimney kernel: pci254: <PCI bus> on pcib15 Jan 31 18:24:11 chimney kernel: pci254: domain=0, physical bus=254 Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c40, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=0, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c01, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=0, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c10, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=2, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c11, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=2, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c14, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=2, func=4 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c15, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=2, func=5 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c18, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=3, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c19, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=3, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c1a, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=3, func=2 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c1c, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=3, func=4 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c20, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=4, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c21, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=4, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c22, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=4, func=2 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c23, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=4, func=3 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c28, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=5, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c29, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=5, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c2a, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=5, func=2 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c2b, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=5, func=3 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c30, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=6, func=0 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c31, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=6, func=1 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c32, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=6, func=2 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: found-> vendor=0x8086, dev=0x2c33, revid=0x05 Jan 31 18:24:11 chimney kernel: domain=0, bus=254, slot=6, func=3 Jan 31 18:24:11 chimney kernel: class=06-00-00, hdrtype=0x00, mfdev=1 Jan 31 18:24:11 chimney kernel: cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords) Jan 31 18:24:11 chimney kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) Jan 31 18:24:11 chimney kernel: acpi0: wakeup code va 0xffffff827502c000 pa 0x4000 Jan 31 18:24:11 chimney kernel: ex_isa_identify() Jan 31 18:24:11 chimney kernel: ahc_isa_probe 0: ioport 0xc00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 1: ioport 0x1c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 2: ioport 0x2c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 3: ioport 0x3c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 4: ioport 0x4c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 5: ioport 0x5c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 6: ioport 0x6c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 7: ioport 0x7c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 8: ioport 0x8c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 9: ioport 0x9c00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 10: ioport 0xac00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 11: ioport 0xbc00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 12: ioport 0xcc00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 13: ioport 0xdc00 alloc failed Jan 31 18:24:11 chimney kernel: ahc_isa_probe 14: ioport 0xec00 alloc failed Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd0000-0xd07ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd0800-0xd0fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd1000-0xd17ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd1800-0xd1fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd2000-0xd27ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd2800-0xd2fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xda000-0xda7ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xda800-0xdafff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xdd800-0xddfff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xde000-0xde7ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xde800-0xdefff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xdf800-0xdffff) for rid 2 of orm0 Jan 31 18:24:11 chimney kernel: isa_probe_children: disabling PnP devices Jan 31 18:24:11 chimney kernel: atrtc: atrtc0 already exists; skipping it Jan 31 18:24:11 chimney kernel: attimer: attimer0 already exists; skipping it Jan 31 18:24:11 chimney kernel: sc: sc0 already exists; skipping it Jan 31 18:24:11 chimney kernel: uart: uart1 already exists; skipping it Jan 31 18:24:11 chimney kernel: isa_probe_children: probing non-PnP devices Jan 31 18:24:11 chimney kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcefff on isa0 Jan 31 18:24:11 chimney kernel: sc0: <System console> at flags 0x100 on isa0 Jan 31 18:24:11 chimney kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jan 31 18:24:11 chimney kernel: sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) Jan 31 18:24:11 chimney kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0 Jan 31 18:24:11 chimney kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 4 (0x60-0x60) for rid 0 of atkbdc0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 4 (0x64-0x64) for rid 1 of atkbdc0 Jan 31 18:24:11 chimney kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 Jan 31 18:24:11 chimney kernel: kbd0 at atkbd0 Jan 31 18:24:11 chimney kernel: kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 Jan 31 18:24:11 chimney kernel: ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 89 Jan 31 18:24:11 chimney kernel: atkbd0: [GIANT-LOCKED] Jan 31 18:24:11 chimney kernel: psm0: unable to allocate IRQ Jan 31 18:24:11 chimney kernel: pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0 Jan 31 18:24:11 chimney kernel: fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Jan 31 18:24:11 chimney kernel: ppc0: cannot reserve I/O port range Jan 31 18:24:11 chimney kernel: ppc0: <Parallel port> failed to probe at irq 7 on isa0 Jan 31 18:24:11 chimney kernel: pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0 Jan 31 18:24:11 chimney kernel: uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 Jan 31 18:24:11 chimney kernel: isa_probe_children: probing PnP devices Jan 31 18:24:11 chimney kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0 Jan 31 18:24:11 chimney kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0 Jan 31 18:24:11 chimney kernel: est1: <Enhanced SpeedStep Frequency Control> on cpu1 Jan 31 18:24:11 chimney kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1 Jan 31 18:24:11 chimney kernel: est2: <Enhanced SpeedStep Frequency Control> on cpu2 Jan 31 18:24:11 chimney kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2 Jan 31 18:24:11 chimney kernel: est3: <Enhanced SpeedStep Frequency Control> on cpu3 Jan 31 18:24:11 chimney kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3 Jan 31 18:24:11 chimney kernel: est4: <Enhanced SpeedStep Frequency Control> on cpu4 Jan 31 18:24:11 chimney kernel: p4tcc4: <CPU Frequency Thermal Control> on cpu4 Jan 31 18:24:11 chimney kernel: est5: <Enhanced SpeedStep Frequency Control> on cpu5 Jan 31 18:24:11 chimney kernel: p4tcc5: <CPU Frequency Thermal Control> on cpu5 Jan 31 18:24:11 chimney kernel: est6: <Enhanced SpeedStep Frequency Control> on cpu6 Jan 31 18:24:11 chimney kernel: p4tcc6: <CPU Frequency Thermal Control> on cpu6 Jan 31 18:24:11 chimney kernel: est7: <Enhanced SpeedStep Frequency Control> on cpu7 Jan 31 18:24:11 chimney kernel: p4tcc7: <CPU Frequency Thermal Control> on cpu7 Jan 31 18:24:11 chimney kernel: Device configuration finished. Jan 31 18:24:11 chimney kernel: procfs registered Jan 31 18:24:11 chimney kernel: Timecounters tick every 1.000 msec Jan 31 18:24:11 chimney kernel: vlan: initialized, using hash tables with chaining Jan 31 18:24:11 chimney kernel: lo0: bpf attached Jan 31 18:24:11 chimney kernel: hptrr: no controller detected. Jan 31 18:24:11 chimney kernel: usbus0: 12Mbps Full Speed USB v1.0 Jan 31 18:24:11 chimney kernel: usbus1: 12Mbps Full Speed USB v1.0 Jan 31 18:24:11 chimney kernel: usbus2: 480Mbps High Speed USB v2.0 Jan 31 18:24:11 chimney kernel: siisch0: SIIS reset... Jan 31 18:24:11 chimney kernel: siisch0: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: siisch0: SIIS reset done: devices=00000001 Jan 31 18:24:11 chimney kernel: siisch1: SIIS reset... Jan 31 18:24:11 chimney kernel: siisch1: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: siisch1: SIIS reset done: devices=00000001 Jan 31 18:24:11 chimney kernel: siisch2: SIIS reset... Jan 31 18:24:11 chimney kernel: siisch2: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: siisch2: SIIS reset done: devices=00000001 Jan 31 18:24:11 chimney kernel: siisch3: SIIS reset... Jan 31 18:24:11 chimney kernel: siisch3: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: siisch3: SIIS reset done: devices=00000001 Jan 31 18:24:11 chimney kernel: ahcich0: AHCI reset... Jan 31 18:24:11 chimney kernel: ahcich0: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: ugen0.1: <Intel> at usbus0 Jan 31 18:24:11 chimney kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Jan 31 18:24:11 chimney kernel: ugen1.1: <Intel> at usbus1 Jan 31 18:24:11 chimney kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 Jan 31 18:24:11 chimney kernel: ugen2.1: <Intel> at usbus2 Jan 31 18:24:11 chimney kernel: uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 Jan 31 18:24:11 chimney kernel: ahcich0: AHCI reset: device found Jan 31 18:24:11 chimney kernel: ahcich0: AHCI reset: device ready after 0ms Jan 31 18:24:11 chimney kernel: (aprobe4:ahcich0:0:0:0): SIGNATURE: 0000 Jan 31 18:24:11 chimney kernel: ahcich1: AHCI reset... Jan 31 18:24:11 chimney kernel: ahcich1: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: ahcich1: AHCI reset: device found Jan 31 18:24:11 chimney kernel: ahcich1: AHCI reset: device ready after 0ms Jan 31 18:24:11 chimney kernel: (aprobe5:ahcich1:0:0:0): SIGNATURE: 0000 Jan 31 18:24:11 chimney kernel: ahcich2: AHCI reset... Jan 31 18:24:11 chimney kernel: ahcich2: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: ahcich2: AHCI reset: device found Jan 31 18:24:11 chimney kernel: ahcich3: AHCI reset... Jan 31 18:24:11 chimney kernel: ahcich3: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: ahcich3: AHCI reset: device found Jan 31 18:24:11 chimney kernel: ahcich4: AHCI reset... Jan 31 18:24:11 chimney kernel: ahcich4: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: ahcich4: AHCI reset: device found Jan 31 18:24:11 chimney kernel: ahcich5: AHCI reset... Jan 31 18:24:11 chimney kernel: ahcich5: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: ahcich5: AHCI reset: device found Jan 31 18:24:11 chimney kernel: siisch4: SIIS reset... Jan 31 18:24:11 chimney kernel: siisch4: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: siisch4: SIIS reset done: devices=00000001 Jan 31 18:24:11 chimney kernel: siisch5: SIIS reset... Jan 31 18:24:11 chimney kernel: siisch5: SATA connect time=100us status=00000123 Jan 31 18:24:11 chimney kernel: siisch5: SIIS reset done: devices=00000001 Jan 31 18:24:11 chimney kernel: ahcich2: AHCI reset: device ready after 100ms Jan 31 18:24:11 chimney kernel: (aprobe4:ahcich2:0:0:0): SIGNATURE: 0000 Jan 31 18:24:11 chimney kernel: ahcich3: AHCI reset: device ready after 100ms Jan 31 18:24:11 chimney kernel: (aprobe5:ahcich3:0:0:0): SIGNATURE: 0000 Jan 31 18:24:11 chimney kernel: ahcich4: AHCI reset: device ready after 100ms Jan 31 18:24:11 chimney kernel: (aprobe6:ahcich4:0:0:0): SIGNATURE: 0000 Jan 31 18:24:11 chimney kernel: ahcich5: AHCI reset: device ready after 100ms Jan 31 18:24:11 chimney kernel: (aprobe7:ahcich5:0:0:0): SIGNATURE: 0000 Jan 31 18:24:11 chimney kernel: uhub0: 2 ports with 2 removable, self powered Jan 31 18:24:11 chimney kernel: uhub1: 2 ports with 2 removable, self powered Jan 31 18:24:11 chimney kernel: uhub2: 4 ports with 4 removable, self powered Jan 31 18:24:11 chimney kernel: (probe253:mpt2:0:1:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe253:mpt2:0:1:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe253:mpt2:0:1:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe253:mpt2:0:1:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe253:mpt2:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe253:mpt2:0:1:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe2:mpt0:0:2:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe2:mpt0:0:2:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe2:mpt0:0:2:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe2:mpt0:0:2:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe2:mpt0:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe2:mpt0:0:2:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: ugen0.2: <Silitek> at usbus0 Jan 31 18:24:11 chimney kernel: (probe255:mpt2:0:3:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe255:mpt2:0:3:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe255:mpt2:0:3:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe255:mpt2:0:3:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe255:mpt2:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe255:mpt2:0:3:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe257:mpt2:0:5:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe257:mpt2:0:5:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe257:mpt2:0:5:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe257:mpt2:0:5:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe257:mpt2:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe257:mpt2:0:5:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe1:mpt0:0:1:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe1:mpt0:0:1:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe1:mpt0:0:1:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe1:mpt0:0:1:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe1:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe1:mpt0:0:1:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe5:mpt0:0:5:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe5:mpt0:0:5:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe5:mpt0:0:5:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe5:mpt0:0:5:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe5:mpt0:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe5:mpt0:0:5:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe128:mpt1:0:2:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe128:mpt1:0:2:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe128:mpt1:0:2:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe128:mpt1:0:2:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe128:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe128:mpt1:0:2:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe254:mpt2:0:2:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe254:mpt2:0:2:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe254:mpt2:0:2:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe254:mpt2:0:2:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe254:mpt2:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe254:mpt2:0:2:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe258:mpt2:0:6:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe258:mpt2:0:6:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe258:mpt2:0:6:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe258:mpt2:0:6:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe258:mpt2:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe258:mpt2:0:6:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe259:mpt2:0:7:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe259:mpt2:0:7:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe259:mpt2:0:7:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe259:mpt2:0:7:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe259:mpt2:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe259:mpt2:0:7:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe3:mpt0:0:3:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe3:mpt0:0:3:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe3:mpt0:0:3:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe3:mpt0:0:3:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe3:mpt0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe3:mpt0:0:3:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe6:mpt0:0:6:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe6:mpt0:0:6:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe6:mpt0:0:6:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe6:mpt0:0:6:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe6:mpt0:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe6:mpt0:0:6:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe0:mpt0:0:0:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe0:mpt0:0:0:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe0:mpt0:0:0:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe0:mpt0:0:0:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe0:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe0:mpt0:0:0:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe7:mpt0:0:7:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe7:mpt0:0:7:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe7:mpt0:0:7:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe7:mpt0:0:7:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe7:mpt0:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe7:mpt0:0:7:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe4:mpt0:0:4:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe4:mpt0:0:4:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe4:mpt0:0:4:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe4:mpt0:0:4:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe4:mpt0:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe4:mpt0:0:4:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe129:mpt1:0:3:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe129:mpt1:0:3:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe129:mpt1:0:3:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe129:mpt1:0:3:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe129:mpt1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe129:mpt1:0:3:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe131:mpt1:0:5:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe131:mpt1:0:5:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe131:mpt1:0:5:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe131:mpt1:0:5:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe131:mpt1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe131:mpt1:0:5:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe126:mpt1:0:0:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe126:mpt1:0:0:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe126:mpt1:0:0:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe126:mpt1:0:0:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe126:mpt1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe126:mpt1:0:0:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe130:mpt1:0:4:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe130:mpt1:0:4:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe130:mpt1:0:4:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe130:mpt1:0:4:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe130:mpt1:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe130:mpt1:0:4:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe127:mpt1:0:1:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe127:mpt1:0:1:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe127:mpt1:0:1:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe127:mpt1:0:1:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe127:mpt1:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe127:mpt1:0:1:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe133:mpt1:0:7:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe133:mpt1:0:7:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe133:mpt1:0:7:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe133:mpt1:0:7:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe133:mpt1:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe133:mpt1:0:7:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: (probe132:mpt1:0:6:0): SCSI status error Jan 31 18:24:11 chimney kernel: (probe132:mpt1:0:6:0): MODE SENSE(6). CDB: 1a 0 a 0 14 0 Jan 31 18:24:11 chimney kernel: (probe132:mpt1:0:6:0): CAM status: SCSI Status Error Jan 31 18:24:11 chimney kernel: (probe132:mpt1:0:6:0): SCSI status: Check Condition Jan 31 18:24:11 chimney kernel: (probe132:mpt1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred) Jan 31 18:24:11 chimney kernel: (probe132:mpt1:0:6:0): Retrying command (per sense data) Jan 31 18:24:11 chimney kernel: ukbd0: <Silitek IBM USB Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus0 Jan 31 18:24:11 chimney kernel: kbd2 at ukbd0 Jan 31 18:24:11 chimney kernel: kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 Jan 31 18:24:11 chimney kernel: uhid0: <Silitek IBM USB Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus0 Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:15:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:15:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:15:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:15:0): ATA status: 50 (DRDY SERV ) Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:15:0): RES: 50 00 01 69 96 00 00 00 00 01 00 Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:15:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:15:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:15:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:15:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:15:0): ATA status: 50 (DRDY SERV ) Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:15:0): RES: 50 00 01 69 96 00 00 00 00 01 00 Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:15:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:15:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:15:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:15:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:15:0): ATA status: 50 (DRDY SERV ) Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:15:0): RES: 50 00 01 69 96 00 00 00 00 01 00 Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:15:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:15:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:15:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:15:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:15:0): ATA status: 50 (DRDY SERV ) Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:15:0): RES: 50 00 01 69 96 00 00 00 00 01 00 Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:15:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: (aprobe8:siisch4:0:15:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe8:siisch4:0:15:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe8:siisch4:0:15:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe8:siisch4:0:15:0): ATA status: 50 (DRDY SERV ) Jan 31 18:24:11 chimney kernel: (aprobe8:siisch4:0:15:0): RES: 50 00 01 69 96 00 00 00 00 01 00 Jan 31 18:24:11 chimney kernel: (aprobe8:siisch4:0:15:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: (aprobe9:siisch5:0:15:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe9:siisch5:0:15:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe9:siisch5:0:15:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe9:siisch5:0:15:0): ATA status: 50 (DRDY SERV ) Jan 31 18:24:11 chimney kernel: (aprobe9:siisch5:0:15:0): RES: 50 00 01 69 96 00 00 00 00 01 00 Jan 31 18:24:11 chimney kernel: (aprobe9:siisch5:0:15:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: siisch0: port is not ready (timeout 1000ms) status = 001f0000 Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:0:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:0:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:0:0): ATA status: 00 () Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:0:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe0:siisch0:0:0:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: siisch1: port is not ready (timeout 1000ms) status = 001f0000 Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:0:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:0:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:0:0): ATA status: 00 () Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:0:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe1:siisch1:0:0:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: siisch2: port is not ready (timeout 1000ms) status = 001f0000 Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:0:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:0:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:0:0): ATA status: 00 () Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:0:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe2:siisch2:0:0:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: siisch3: port is not ready (timeout 1000ms) status = 001f0000 Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:0:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:0:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:0:0): ATA status: 00 () Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:0:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe3:siisch3:0:0:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: siisch4: port is not ready (timeout 1000ms) status = 001f0000 Jan 31 18:24:11 chimney kernel: (aprobe4:siisch4:0:0:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe4:siisch4:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe4:siisch4:0:0:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe4:siisch4:0:0:0): ATA status: 00 () Jan 31 18:24:11 chimney kernel: (aprobe4:siisch4:0:0:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe4:siisch4:0:0:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: siisch5: port is not ready (timeout 1000ms) status = 001f0000 Jan 31 18:24:11 chimney kernel: (aprobe5:siisch5:0:0:0): ATA status error Jan 31 18:24:11 chimney kernel: (aprobe5:siisch5:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe5:siisch5:0:0:0): CAM status: ATA Status Error Jan 31 18:24:11 chimney kernel: (aprobe5:siisch5:0:0:0): ATA status: 00 () Jan 31 18:24:11 chimney kernel: (aprobe5:siisch5:0:0:0): RES: 00 00 00 00 00 00 00 00 00 00 00 Jan 31 18:24:11 chimney kernel: (aprobe5:siisch5:0:0:0): Error 5, Retries exhausted Jan 31 18:24:11 chimney kernel: pass0 at ahcich0 bus 0 scbus4 target 0 lun 0 Jan 31 18:24:11 chimney kernel: pass0: <OCZ-VERTEX 1.6> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: pass0: Serial Number UDEWGZT6U5Y88410Z35I Jan 31 18:24:11 chimney kernel: pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) Jan 31 18:24:11 chimney kernel: pass0: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass1 at ahcich1 bus 0 scbus5 target 0 lun 0 Jan 31 18:24:11 chimney kernel: pass1: <OCZ-VERTEX 1.6> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: pass1: Serial Number K245ON857FXQCOSU40HX Jan 31 18:24:11 chimney kernel: pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) Jan 31 18:24:11 chimney kernel: pass1: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass2 at ahcich2 bus 0 scbus6 target 0 lun 0 Jan 31 18:24:11 chimney kernel: pass2: <ST31500341AS CC1H> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: pass2: Serial Number 9VS1EXWL Jan 31 18:24:11 chimney kernel: pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Jan 31 18:24:11 chimney kernel: pass2: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass3 at ahcich3 bus 0 scbus7 target 0 lun 0 Jan 31 18:24:11 chimney kernel: pass3: <ST31500341AS CC1H> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: pass3: Serial Number 9VS1EN7E Jan 31 18:24:11 chimney kernel: pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Jan 31 18:24:11 chimney kernel: pass3: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass4 at ahcich4 bus 0 scbus8 target 0 lun 0 Jan 31 18:24:11 chimney kernel: pass4: <ST31500341AS CC1H> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: pass4: Serial Number 9VS1GS0H Jan 31 18:24:11 chimney kernel: pass4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Jan 31 18:24:11 chimney kernel: pass4: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass5 at ahcich5 bus 0 scbus9 target 0 lun 0 Jan 31 18:24:11 chimney kernel: pass5: <ST31500341AS CC1H> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: pass5: Serial Number 9VS1GWA3 Jan 31 18:24:11 chimney kernel: pass5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Jan 31 18:24:11 chimney kernel: pass5: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass6 at mpt0 bus 0 scbus12 target 0 lun 0 Jan 31 18:24:11 chimney kernel: pass6: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass6: Serial Number 9VS1E2QD Jan 31 18:24:11 chimney kernel: pass6: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass6: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass7 at mpt0 bus 0 scbus12 target 1 lun 0 Jan 31 18:24:11 chimney kernel: pass7: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass7: Serial Number 9VS1HA2R Jan 31 18:24:11 chimney kernel: pass7: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass7: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass8 at mpt0 bus 0 scbus12 target 2 lun 0 Jan 31 18:24:11 chimney kernel: pass8: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass8: Serial Number 9VS1GZ1G Jan 31 18:24:11 chimney kernel: pass8: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass8: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass9 at mpt0 bus 0 scbus12 target 3 lun 0 Jan 31 18:24:11 chimney kernel: pass9: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass9: Serial Number 9VS1H8BQ Jan 31 18:24:11 chimney kernel: pass9: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass9: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass10 at mpt0 bus 0 scbus12 target 4 lun 0 Jan 31 18:24:11 chimney kernel: pass10: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass10: Serial Number 9VS1HBEM Jan 31 18:24:11 chimney kernel: pass10: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass10: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass11 at mpt0 bus 0 scbus12 target 5 lun 0 Jan 31 18:24:11 chimney kernel: pass11: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass11: Serial Number 9VS1J267 Jan 31 18:24:11 chimney kernel: pass11: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass11: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass12 at mpt0 bus 0 scbus12 target 6 lun 0 Jan 31 18:24:11 chimney kernel: pass12: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass12: Serial Number 9VS1HBDK Jan 31 18:24:11 chimney kernel: pass12: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass12: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass13 at mpt0 bus 0 scbus12 target 7 lun 0 Jan 31 18:24:11 chimney kernel: pass13: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass13: Serial Number 9VS1CY58 Jan 31 18:24:11 chimney kernel: pass13: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass13: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass14 at mpt1 bus 0 scbus13 target 0 lun 0 Jan 31 18:24:11 chimney kernel: pass14: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass14: Serial Number S13UJ1NQ217081 Jan 31 18:24:11 chimney kernel: pass14: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass14: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass15 at mpt1 bus 0 scbus13 target 1 lun 0 Jan 31 18:24:11 chimney kernel: pass15: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass15: Serial Number S13UJ1NQ217242 Jan 31 18:24:11 chimney kernel: pass15: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass15: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass16 at mpt1 bus 0 scbus13 target 2 lun 0 Jan 31 18:24:11 chimney kernel: pass16: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass16: Serial Number S13UJ1NQ217079 Jan 31 18:24:11 chimney kernel: pass16: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass16: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass17 at mpt1 bus 0 scbus13 target 3 lun 0 Jan 31 18:24:11 chimney kernel: pass17: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass17: Serial Number S13UJ1NQ217245 Jan 31 18:24:11 chimney kernel: pass17: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass17: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass18 at mpt1 bus 0 scbus13 target 4 lun 0 Jan 31 18:24:11 chimney kernel: pass18: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass18: Serial Number S13UJ1NQ217080 Jan 31 18:24:11 chimney kernel: pass18: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass18: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass19 at mpt1 bus 0 scbus13 target 5 lun 0 Jan 31 18:24:11 chimney kernel: pass19: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass19: Serial Number S13UJ1NQ217238 Jan 31 18:24:11 chimney kernel: pass19: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass19: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass20 at mpt1 bus 0 scbus13 target 6 lun 0 Jan 31 18:24:11 chimney kernel: pass20: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass20: Serial Number S13UJ1NQ217239 Jan 31 18:24:11 chimney kernel: pass20: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass20: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass21 at mpt1 bus 0 scbus13 target 7 lun 0 Jan 31 18:24:11 chimney kernel: pass21: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass21: Serial Number S13UJ1NQ217247 Jan 31 18:24:11 chimney kernel: pass21: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass21: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass22 at mpt2 bus 0 scbus14 target 1 lun 0 Jan 31 18:24:11 chimney kernel: pass22: <ATA OCZ-VERTEX 1.7> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass22: Serial Number N7QHVJIM3O9N000D3B70 Jan 31 18:24:11 chimney kernel: pass22: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass22: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass23 at mpt2 bus 0 scbus14 target 2 lun 0 Jan 31 18:24:11 chimney kernel: pass23: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass23: Serial Number 9VS1EQJ7 Jan 31 18:24:11 chimney kernel: pass23: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass23: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass24 at mpt2 bus 0 scbus14 target 3 lun 0 Jan 31 18:24:11 chimney kernel: pass24: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass24: Serial Number 9VS1E1B8 Jan 31 18:24:11 chimney kernel: pass24: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass24: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass25 at mpt2 bus 0 scbus14 target 5 lun 0 Jan 31 18:24:11 chimney kernel: pass25: <ATA OCZ-VERTEX 1.7> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass25: Serial Number G8F22NRWHE7O81093KR7 Jan 31 18:24:11 chimney kernel: pass25: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass25: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass26 at mpt2 bus 0 scbus14 target 6 lun 0 Jan 31 18:24:11 chimney kernel: pass26: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass26: Serial Number 9VS1FW12 Jan 31 18:24:11 chimney kernel: pass26: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass26: Command Queueing enabled Jan 31 18:24:11 chimney kernel: pass27 at mpt2 bus 0 scbus14 target 7 lun 0 Jan 31 18:24:11 chimney kernel: pass27: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: pass27: Serial Number 9VS1FWNS Jan 31 18:24:11 chimney kernel: pass27: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: pass27: Command Queueing enabled Jan 31 18:24:11 chimney kernel: ada0 at ahcich0 bus 0 scbus4 target 0 lun 0 Jan 31 18:24:11 chimney kernel: ada0: <OCZ-VERTEX 1.6> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: ada0: Serial Number UDEWGZT6U5Y88410Z35I Jan 31 18:24:11 chimney kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) Jan 31 18:24:11 chimney kernel: ada0: Command Queueing enabled Jan 31 18:24:11 chimney kernel: ada0: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C) Jan 31 18:24:11 chimney kernel: ada0: Previously was known as ad12 Jan 31 18:24:11 chimney kernel: ada1 at ahcich1 bus 0 scbus5 target 0 lun 0 Jan 31 18:24:11 chimney kernel: ada1: GEOM: new disk ada0 Jan 31 18:24:11 chimney kernel: GEOM: new disk ada1 Jan 31 18:24:11 chimney kernel: <OCZ-VERTEX 1.6> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: ada1: Serial Number K245ON857FXQCOSU40HX Jan 31 18:24:11 chimney kernel: ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) Jan 31 18:24:11 chimney kernel: ada1: Command Queueing enabled Jan 31 18:24:11 chimney kernel: ada1: 30533MB (62533296 512 byte sectors: 16H 63S/T 16383C) Jan 31 18:24:11 chimney kernel: ada1: Previously was known as ad14 Jan 31 18:24:11 chimney kernel: ada2 at ahcich2 bus 0 scbus6 target 0 lun 0 Jan 31 18:24:11 chimney kernel: ada2: <ST31500341AS CC1H> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: ada2: Serial Number 9VS1EXWL Jan 31 18:24:11 chimney kernel: ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Jan 31 18:24:11 chimney kernel: ada2: Command Queueing enabled Jan 31 18:24:11 chimney kernel: ada2: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C) Jan 31 18:24:11 chimney kernel: ada2: Previously was known as ad16 Jan 31 18:24:11 chimney kernel: ada3 at ahcich3 bus 0 scbus7 target 0 lun 0 Jan 31 18:24:11 chimney kernel: ada3: <ST31500341AS CC1H> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: ada3: Serial Number 9VS1EN7E Jan 31 18:24:11 chimney kernel: ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Jan 31 18:24:11 chimney kernel: ada3: Command Queueing enabled Jan 31 18:24:11 chimney kernel: ada3: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C) Jan 31 18:24:11 chimney kernel: ada3: Previously was known as ad18 Jan 31 18:24:11 chimney kernel: ada4 at ahcich4 bus 0 scbus8 target 0 lun 0 Jan 31 18:24:11 chimney kernel: ada4: <ST31500341AS CC1H> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: ada4: Serial Number 9VS1GS0H Jan 31 18:24:11 chimney kernel: ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Jan 31 18:24:11 chimney kernel: ada4: Command Queueing enabled Jan 31 18:24:11 chimney kernel: ada4: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C) Jan 31 18:24:11 chimney kernel: ada4: Previously was known as ad20 Jan 31 18:24:11 chimney kernel: ada5 at ahcich5 bus 0 scbus9 target 0 lun 0 Jan 31 18:24:11 chimney kernel: ada5: <ST31500341AS CC1H> ATA-8 SATA 2.x device Jan 31 18:24:11 chimney kernel: ada5: Serial Number 9VS1GWA3 Jan 31 18:24:11 chimney kernel: ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Jan 31 18:24:11 chimney kernel: ada5: Command Queueing enabled Jan 31 18:24:11 chimney kernel: ada5: 1430799MB (2930277168 512 byte sectors: 16H 63S/T 16383C) Jan 31 18:24:11 chimney kernel: ada5: Previously was known as ad22 Jan 31 18:24:11 chimney kernel: da0 at mpt0 bus 0 scbus12 target 0 lun 0 Jan 31 18:24:11 chimney kernel: da0: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da0: Serial Number 9VS1E2QD Jan 31 18:24:11 chimney kernel: da0: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da0: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da0: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da1 at mpt0 bus 0 scbus12 target 1 lun 0 Jan 31 18:24:11 chimney kernel: da1: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da1: Serial Number 9VS1HA2R Jan 31 18:24:11 chimney kernel: da1: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da1: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da1: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da2 at mpt0 bus 0 scbus12 target 2 lun 0 Jan 31 18:24:11 chimney kernel: da2: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da2: Serial Number 9VS1GZ1G Jan 31 18:24:11 chimney kernel: da2: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da2: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da2: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da3 at mpt0 bus 0 scbus12 target 3 lun 0 Jan 31 18:24:11 chimney kernel: da3: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da3: Serial Number 9VS1H8BQ Jan 31 18:24:11 chimney kernel: da3: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da3: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da3: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da4 at mpt0 bus 0 scbus12 target 4 lun 0 Jan 31 18:24:11 chimney kernel: da4: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da4: Serial Number 9VS1HBEM Jan 31 18:24:11 chimney kernel: da4: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da4: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da4: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da5 at mpt0 bus 0 scbus12 target 5 lun 0 Jan 31 18:24:11 chimney kernel: da5: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da5: Serial Number 9VS1J267 Jan 31 18:24:11 chimney kernel: da5: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da5: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da5: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da6 at mpt0 bus 0 scbus12 target 6 lun 0 Jan 31 18:24:11 chimney kernel: da6: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da6: Serial Number 9VS1HBDK Jan 31 18:24:11 chimney kernel: da6: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da6: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da6: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da7 at mpt0 bus 0 scbus12 target 7 lun 0 Jan 31 18:24:11 chimney kernel: da7: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da7: Serial Number 9VS1CY58 Jan 31 18:24:11 chimney kernel: da7: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da7: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da7: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da8 at mpt1 bus 0 scbus13 target 0 lun 0 Jan 31 18:24:11 chimney kernel: da8: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da8: Serial Number S13UJ1NQ217081 Jan 31 18:24:11 chimney kernel: da8: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da8: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da8: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 31 18:24:11 chimney kernel: da9 at mpt1 bus 0 scbus13 target 1 lun 0 Jan 31 18:24:11 chimney kernel: da9: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da9: Serial Number S13UJ1NQ217242 Jan 31 18:24:11 chimney kernel: da9: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da9: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da9: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 31 18:24:11 chimney kernel: da10 at mpt1 bus 0 scbus13 target 2 lun 0 Jan 31 18:24:11 chimney kernel: da10: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da10: Serial Number S13UJ1NQ217079 Jan 31 18:24:11 chimney kernel: da10: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da10: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da10: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 31 18:24:11 chimney kernel: da11 at mpt1 bus 0 scbus13 target 3 lun 0 Jan 31 18:24:11 chimney kernel: da11: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da11: Serial Number S13UJ1NQ217245 Jan 31 18:24:11 chimney kernel: da11: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da11: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da11: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 31 18:24:11 chimney kernel: da12 at mpt1 bus 0 scbus13 target 4 lun 0 Jan 31 18:24:11 chimney kernel: da12: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da12: Serial Number S13UJ1NQ217080 Jan 31 18:24:11 chimney kernel: da12: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da12: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da12: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 31 18:24:11 chimney kernel: da13 at mpt1 bus 0 scbus13 target 5 lun 0 Jan 31 18:24:11 chimney kernel: da13: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da13: Serial Number S13UJ1NQ217238 Jan 31 18:24:11 chimney kernel: da13: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da13: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da13: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 31 18:24:11 chimney kernel: da14 at mpt1 bus 0 scbus13 target 6 lun 0 Jan 31 18:24:11 chimney kernel: da14: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da14: Serial Number S13UJ1NQ217239 Jan 31 18:24:11 chimney kernel: da14: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da14: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da14: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 31 18:24:11 chimney kernel: da15 at mpt1 bus 0 scbus13 target 7 lun 0 Jan 31 18:24:11 chimney kernel: da15: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da15: Serial Number S13UJ1NQ217247 Jan 31 18:24:11 chimney kernel: da15: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da15: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da15: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 31 18:24:11 chimney kernel: da16 at mpt2 bus 0 scbus14 target 1 lun 0 Jan 31 18:24:11 chimney kernel: da16: <ATA OCZ-VERTEX 1.7> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da16: Serial Number N7QHVJIM3O9N000D3B70 Jan 31 18:24:11 chimney kernel: da16: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da16: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da16: 30533MB (62533296 512 byte sectors: 255H 63S/T 3892C) Jan 31 18:24:11 chimney kernel: da17 at mpt2 bus 0 scbus14 target 2 lun 0 Jan 31 18:24:11 chimney kernel: da17: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da17: Serial Number 9VS1EQJ7 Jan 31 18:24:11 chimney kernel: da17: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da17: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da17: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da18 at mpt2 bus 0 scbus14 target 3 lun 0 Jan 31 18:24:11 chimney kernel: da18: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da18: Serial Number 9VS1E1B8 Jan 31 18:24:11 chimney kernel: da18: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da18: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da18: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da19 at mpt2 bus 0 scbus14 target 5 lun 0 Jan 31 18:24:11 chimney kernel: da19: <ATA OCZ-VERTEX 1.7> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da19: Serial Number G8F22NRWHE7O81093KR7 Jan 31 18:24:11 chimney kernel: da19: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da19: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da19: 30533MB (62533296 512 byte sectors: 255H 63S/T 3892C) Jan 31 18:24:11 chimney kernel: da20 at mpt2 bus 0 scbus14 target 6 lun 0 Jan 31 18:24:11 chimney kernel: da20: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da20: Serial Number 9VS1FW12 Jan 31 18:24:11 chimney kernel: da20: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da20: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da20: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: da21 at mpt2 bus 0 scbus14 target 7 lun 0 Jan 31 18:24:11 chimney kernel: da21: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 31 18:24:11 chimney kernel: da21: Serial Number 9VS1FWNS Jan 31 18:24:11 chimney kernel: da21: 300.000MB/s transfers Jan 31 18:24:11 chimney kernel: da21: Command Queueing enabled Jan 31 18:24:11 chimney kernel: da21: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 31 18:24:11 chimney kernel: lapic2: CMCI unmasked Jan 31 18:24:11 chimney kernel: lapic4: CMCI unmasked Jan 31 18:24:11 chimney kernel: lapic6: CMCI unmasked Jan 31 18:24:11 chimney kernel: lapic20: CMCI unmasked Jan 31 18:24:11 chimney kernel: lapic18: CMCI unmasked Jan 31 18:24:11 chimney kernel: lapic16: CMCI unmasked Jan 31 18:24:11 chimney kernel: lapic22: CMCI unmasked Jan 31 18:24:11 chimney kernel: SMP: AP CPU #1 Launched! Jan 31 18:24:11 chimney kernel: cpu1 AP: Jan 31 18:24:11 chimney kernel: ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff Jan 31 18:24:11 chimney kernel: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff Jan 31 18:24:11 chimney kernel: timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Jan 31 18:24:11 chimney kernel: cmci: 0x000000f2 Jan 31 18:24:11 chimney kernel: SMP: AP CPU #4 Launched! Jan 31 18:24:11 chimney kernel: cpu4 AP: Jan 31 18:24:11 chimney kernel: ID: 0x10000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff Jan 31 18:24:11 chimney kernel: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff Jan 31 18:24:11 chimney kernel: timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Jan 31 18:24:11 chimney kernel: cmci: 0x000000f2 Jan 31 18:24:11 chimney kernel: SMP: AP CPU #2 Launched! Jan 31 18:24:11 chimney kernel: cpu2 AP: Jan 31 18:24:11 chimney kernel: ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff Jan 31 18:24:11 chimney kernel: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff Jan 31 18:24:11 chimney kernel: timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Jan 31 18:24:11 chimney kernel: cmci: 0x000000f2 Jan 31 18:24:11 chimney kernel: SMP: AP CPU #7 Launched! Jan 31 18:24:11 chimney kernel: cpu7 AP: Jan 31 18:24:11 chimney kernel: ID: 0x16000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff Jan 31 18:24:11 chimney kernel: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff Jan 31 18:24:11 chimney kernel: timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Jan 31 18:24:11 chimney kernel: cmci: 0x000000f2 Jan 31 18:24:11 chimney kernel: SMP: AP CPU #3 Launched! Jan 31 18:24:11 chimney kernel: cpu3 AP: Jan 31 18:24:11 chimney kernel: ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff Jan 31 18:24:11 chimney kernel: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff Jan 31 18:24:11 chimney kernel: timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Jan 31 18:24:11 chimney kernel: cmci: 0x000000f2 Jan 31 18:24:11 chimney kernel: SMP: AP CPU #6 Launched! Jan 31 18:24:11 chimney kernel: cpu6 AP: Jan 31 18:24:11 chimney kernel: ID: 0x14000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff Jan 31 18:24:11 chimney kernel: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff Jan 31 18:24:11 chimney kernel: timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Jan 31 18:24:11 chimney kernel: cmci: 0x000000f2 Jan 31 18:24:11 chimney kernel: SMP: AP CPU #5 Launched! Jan 31 18:24:11 chimney kernel: cpu5 AP: Jan 31 18:24:11 chimney kernel: ID: 0x12000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff Jan 31 18:24:11 chimney kernel: lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff Jan 31 18:24:11 chimney kernel: timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400 Jan 31 18:24:11 chimney kernel: cmci: 0x000000f2 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 257 to local APIC 2 vector 48 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 258 to local APIC 4 vector 48 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 259 to local APIC 6 vector 48 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 260 to local APIC 16 vector 48 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 261 to local APIC 18 vector 48 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 262 to local APIC 20 vector 48 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 263 to local APIC 22 vector 48 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 266 to local APIC 2 vector 49 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 267 to local APIC 4 vector 49 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 268 to local APIC 6 vector 49 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 269 to local APIC 16 vector 49 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 270 to local APIC 18 vector 49 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 271 to local APIC 20 vector 49 Jan 31 18:24:11 chimney kernel: msi: Assigning MSI-X IRQ 272 to local APIC 22 vector 49 Jan 31 18:24:11 chimney kernel: GEOM: new disk ada2 Jan 31 18:24:11 chimney kernel: GEOM: new disk ada3 Jan 31 18:24:11 chimney kernel: GEOM: new disk ada4 Jan 31 18:24:11 chimney kernel: SMP: failed TSC synchronization test Jan 31 18:24:11 chimney kernel: TSC timecounter discards lower 7 bit(s) Jan 31 18:24:11 chimney kernel: Timecounter "TSC-low" frequency 15586276 Hz quality -100 Jan 31 18:24:11 chimney kernel: GEOM: new disk ada5 Jan 31 18:24:11 chimney kernel: GEOM: new disk da0 Jan 31 18:24:11 chimney kernel: GEOM: new disk da1 Jan 31 18:24:11 chimney kernel: GEOM: new disk da2 Jan 31 18:24:11 chimney kernel: GEOM: new disk da3 Jan 31 18:24:11 chimney kernel: GEOM: new disk da4 Jan 31 18:24:11 chimney kernel: GEOM: new disk da5 Jan 31 18:24:11 chimney kernel: GEOM: new disk da6 Jan 31 18:24:11 chimney kernel: GEOM: new disk da7 Jan 31 18:24:11 chimney kernel: GEOM: new disk da8 Jan 31 18:24:11 chimney kernel: GEOM: new disk da9 Jan 31 18:24:11 chimney kernel: GEOM: new disk da10 Jan 31 18:24:11 chimney kernel: GEOM: new disk da11 Jan 31 18:24:11 chimney kernel: GEOM: new disk da12 Jan 31 18:24:11 chimney kernel: GEOM: new disk da13 Jan 31 18:24:11 chimney kernel: GEOM: new disk da14 Jan 31 18:24:11 chimney kernel: GEOM: new disk da15 Jan 31 18:24:11 chimney kernel: GEOM: new disk da16 Jan 31 18:24:11 chimney kernel: GEOM: new disk da17 Jan 31 18:24:11 chimney kernel: GEOM: new disk da18 Jan 31 18:24:11 chimney kernel: GEOM: new disk da19 Jan 31 18:24:11 chimney kernel: GEOM: new disk da20 Jan 31 18:24:11 chimney kernel: GEOM: new disk da21 Jan 31 18:24:11 chimney kernel: GEOM: ada2: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: ada3: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: ada4: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: ada5: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da0: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da1: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da2: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da3: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da4: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da5: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da6: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da7: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da17: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da18: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da20: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM: da21: the secondary GPT header is not in the last LBA. Jan 31 18:24:11 chimney kernel: GEOM_PART: partition 1 has end offset beyond last LBA: 62524979 > 62508914 Jan 31 18:24:11 chimney kernel: GEOM_PART: integrity check failed (da16s1, EBR) Jan 31 18:24:11 chimney kernel: GEOM_PART: partition 1 has end offset beyond last LBA: 62524979 > 62508914 Jan 31 18:24:11 chimney kernel: GEOM_PART: integrity check failed (da19s1, EBR) Jan 31 18:24:11 chimney kernel: Trying to mount root from ufs:/dev/ada0s1a [rw]... Jan 31 18:24:11 chimney kernel: start_init: trying /sbin/init Jan 31 18:24:11 chimney kernel: ZFS filesystem version 5 Jan 31 18:24:11 chimney kernel: ZFS storage pool version 28 Jan 31 18:24:11 chimney kernel: IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled --------------050202040600020906070504 Content-Type: text/plain; name="lastboot82" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lastboot82" Jan 28 11:19:23 chimney syslogd: kernel boot file is /boot/kernel/kernel Jan 28 11:19:23 chimney kernel: Copyright (c) 1992-2011 The FreeBSD Project. Jan 28 11:19:23 chimney kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Jan 28 11:19:23 chimney kernel: The Regents of the University of California. All rights reserved. Jan 28 11:19:23 chimney kernel: FreeBSD is a registered trademark of The FreeBSD Foundation. Jan 28 11:19:23 chimney kernel: FreeBSD 8.2-RELEASE-p3 #0: Tue Sep 27 18:45:57 UTC 2011 Jan 28 11:19:23 chimney kernel: root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 Jan 28 11:19:23 chimney kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Jan 28 11:19:23 chimney kernel: CPU: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz (2008.08-MHz K8-class CPU) Jan 28 11:19:23 chimney kernel: Origin = "GenuineIntel" Id = 0x106a5 Family = 6 Model = 1a Stepping = 5 Jan 28 11:19:23 chimney kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Jan 28 11:19:23 chimney kernel: Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> Jan 28 11:19:23 chimney kernel: AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> Jan 28 11:19:23 chimney kernel: AMD Features2=0x1<LAHF> Jan 28 11:19:23 chimney kernel: TSC: P-state invariant Jan 28 11:19:23 chimney kernel: real memory = 6446645248 (6148 MB) Jan 28 11:19:23 chimney kernel: avail memory = 6149832704 (5864 MB) Jan 28 11:19:23 chimney kernel: ACPI APIC Table: <081209 APIC2216> Jan 28 11:19:23 chimney kernel: FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs Jan 28 11:19:23 chimney kernel: FreeBSD/SMP: 2 package(s) x 4 core(s) Jan 28 11:19:23 chimney kernel: cpu0 (BSP): APIC ID: 0 Jan 28 11:19:23 chimney kernel: cpu1 (AP): APIC ID: 2 Jan 28 11:19:23 chimney kernel: cpu2 (AP): APIC ID: 4 Jan 28 11:19:23 chimney kernel: cpu3 (AP): APIC ID: 6 Jan 28 11:19:23 chimney kernel: cpu4 (AP): APIC ID: 16 Jan 28 11:19:23 chimney kernel: cpu5 (AP): APIC ID: 18 Jan 28 11:19:23 chimney kernel: cpu6 (AP): APIC ID: 20 Jan 28 11:19:23 chimney kernel: cpu7 (AP): APIC ID: 22 Jan 28 11:19:23 chimney kernel: ioapic0: Changing APIC ID to 1 Jan 28 11:19:23 chimney kernel: ioapic1: Changing APIC ID to 3 Jan 28 11:19:23 chimney kernel: ioapic2: Changing APIC ID to 5 Jan 28 11:19:23 chimney kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard Jan 28 11:19:23 chimney kernel: ioapic1 <Version 2.0> irqs 24-47 on motherboard Jan 28 11:19:23 chimney kernel: ioapic2 <Version 2.0> irqs 48-71 on motherboard Jan 28 11:19:23 chimney kernel: kbd1 at kbdmux0 Jan 28 11:19:23 chimney kernel: acpi0: <NEC > on motherboard Jan 28 11:19:23 chimney kernel: acpi0: [ITHREAD] Jan 28 11:19:23 chimney kernel: acpi0: Power Button (fixed) Jan 28 11:19:23 chimney kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Jan 28 11:19:23 chimney kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 Jan 28 11:19:23 chimney kernel: cpu0: <ACPI CPU> on acpi0 Jan 28 11:19:23 chimney kernel: ACPI Warning: Incorrect checksum in table [OEMB] - 0x86, should be 0x84 (20101013/tbutils-354) Jan 28 11:19:23 chimney kernel: cpu1: <ACPI CPU> on acpi0 Jan 28 11:19:23 chimney kernel: cpu2: <ACPI CPU> on acpi0 Jan 28 11:19:23 chimney kernel: cpu3: <ACPI CPU> on acpi0 Jan 28 11:19:23 chimney kernel: cpu4: <ACPI CPU> on acpi0 Jan 28 11:19:23 chimney kernel: cpu5: <ACPI CPU> on acpi0 Jan 28 11:19:23 chimney kernel: cpu6: <ACPI CPU> on acpi0 Jan 28 11:19:23 chimney kernel: cpu7: <ACPI CPU> on acpi0 Jan 28 11:19:23 chimney kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfed40000-0xfed44fff on acpi0 Jan 28 11:19:23 chimney kernel: pci0: <ACPI PCI bus> on pcib0 Jan 28 11:19:23 chimney kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 Jan 28 11:19:23 chimney kernel: pci1: <ACPI PCI bus> on pcib1 Jan 28 11:19:23 chimney kernel: igb0: <Intel(R) PRO/1000 Network Connection version - 2.0.7> port 0x8c00-0x8c1f mem 0xf9ee0000-0xf9efffff,0xf9ec0000-0xf9edffff,0xf9ebc000-0xf9ebffff irq 28 at device 0.0 on pci1 Jan 28 11:19:23 chimney kernel: igb0: Using MSIX interrupts with 9 vectors Jan 28 11:19:23 chimney kernel: igb0: [ITHREAD] Jan 28 11:19:23 chimney last message repeated 8 times Jan 28 11:19:23 chimney kernel: igb0: Ethernet address: 00:30:48:9e:58:ec Jan 28 11:19:23 chimney kernel: igb1: <Intel(R) PRO/1000 Network Connection version - 2.0.7> port 0x8880-0x889f mem 0xf9e60000-0xf9e7ffff,0xf9e40000-0xf9e5ffff,0xf9e3c000-0xf9e3ffff irq 40 at device 0.1 on pci1 Jan 28 11:19:23 chimney kernel: igb1: Using MSIX interrupts with 9 vectors Jan 28 11:19:23 chimney kernel: igb1: [ITHREAD] Jan 28 11:19:23 chimney last message repeated 8 times Jan 28 11:19:23 chimney kernel: igb1: Ethernet address: 00:30:48:9e:58:ed Jan 28 11:19:23 chimney kernel: pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 Jan 28 11:19:23 chimney kernel: pci2: <ACPI PCI bus> on pcib2 Jan 28 11:19:23 chimney kernel: cxgbc0: <Chelsio T310, 1 port> mem 0xfadfe000-0xfadfefff,0xfa000000-0xfa7fffff,0xf9ffe000-0xf9ffefff irq 24 at device 0.0 on pci2 Jan 28 11:19:23 chimney kernel: cxgbc0: using MSI-X interrupts (9 vectors) Jan 28 11:19:23 chimney kernel: cxgb0: <Port 0 10GBASE-CX4> on cxgbc0 Jan 28 11:19:23 chimney kernel: cxgb0: Ethernet address: 00:07:43:05:e1:a3 Jan 28 11:19:23 chimney kernel: cxgbc0: Firmware Version 7.8.0 Jan 28 11:19:23 chimney kernel: pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 Jan 28 11:19:23 chimney kernel: pci3: <ACPI PCI bus> on pcib3 Jan 28 11:19:23 chimney kernel: siis0: <SiI3132 SATA controller> port 0x9c00-0x9c7f mem 0xfaefe000-0xfaefe07f,0xfaef8000-0xfaefbfff irq 26 at device 0.0 on pci3 Jan 28 11:19:23 chimney kernel: siis0: [ITHREAD] Jan 28 11:19:23 chimney kernel: siisch0: <SIIS channel> at channel 0 on siis0 Jan 28 11:19:23 chimney kernel: siisch0: [ITHREAD] Jan 28 11:19:23 chimney kernel: siisch1: <SIIS channel> at channel 1 on siis0 Jan 28 11:19:23 chimney kernel: siisch1: [ITHREAD] Jan 28 11:19:23 chimney kernel: pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0 Jan 28 11:19:23 chimney kernel: pci4: <ACPI PCI bus> on pcib4 Jan 28 11:19:23 chimney kernel: siis1: <SiI3132 SATA controller> port 0xac00-0xac7f mem 0xfaffe000-0xfaffe07f,0xfaff8000-0xfaffbfff irq 30 at device 0.0 on pci4 Jan 28 11:19:23 chimney kernel: siis1: [ITHREAD] Jan 28 11:19:23 chimney kernel: siisch2: <SIIS channel> at channel 0 on siis1 Jan 28 11:19:23 chimney kernel: siisch2: [ITHREAD] Jan 28 11:19:23 chimney kernel: siisch3: <SIIS channel> at channel 1 on siis1 Jan 28 11:19:23 chimney kernel: siisch3: [ITHREAD] Jan 28 11:19:23 chimney kernel: pcib5: <ACPI PCI-PCI bridge> at device 9.0 on pci0 Jan 28 11:19:23 chimney kernel: pci5: <ACPI PCI bus> on pcib5 Jan 28 11:19:23 chimney kernel: pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral> at device 22.0 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral> at device 22.1 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral> at device 22.2 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral> at device 22.3 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral> at device 22.4 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral> at device 22.5 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral> at device 22.6 (no driver attached) Jan 28 11:19:23 chimney kernel: pci0: <base peripheral> at device 22.7 (no driver attached) Jan 28 11:19:23 chimney kernel: uhci0: <Intel 82801JI (ICH10) USB controller USB-A> port 0x6c00-0x6c1f irq 23 at device 29.0 on pci0 Jan 28 11:19:23 chimney kernel: uhci0: [ITHREAD] Jan 28 11:19:23 chimney kernel: uhci0: LegSup = 0x2f00 Jan 28 11:19:23 chimney kernel: usbus0: <Intel 82801JI (ICH10) USB controller USB-A> on uhci0 Jan 28 11:19:23 chimney kernel: uhci1: <Intel 82801JI (ICH10) USB controller USB-B> port 0x6880-0x689f irq 19 at device 29.1 on pci0 Jan 28 11:19:23 chimney kernel: uhci1: [ITHREAD] Jan 28 11:19:23 chimney kernel: uhci1: LegSup = 0x2f00 Jan 28 11:19:23 chimney kernel: usbus1: <Intel 82801JI (ICH10) USB controller USB-B> on uhci1 Jan 28 11:19:23 chimney kernel: ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf9dfc000-0xf9dfc3ff irq 23 at device 29.7 on pci0 Jan 28 11:19:23 chimney kernel: ehci0: [ITHREAD] Jan 28 11:19:23 chimney kernel: usbus2: EHCI version 1.0 Jan 28 11:19:23 chimney kernel: usbus2: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci0 Jan 28 11:19:23 chimney kernel: pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 Jan 28 11:19:23 chimney kernel: pci6: <ACPI PCI bus> on pcib6 Jan 28 11:19:23 chimney kernel: vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xfbefc000-0xfbefffff,0xfb000000-0xfb7fffff irq 16 at device 4.0 on pci6 Jan 28 11:19:23 chimney kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0 Jan 28 11:19:23 chimney kernel: isa0: <ISA bus> on isab0 Jan 28 11:19:23 chimney kernel: atapci0: <Intel ICH10 SATA300 controller> port 0x6800-0x6807,0x6480-0x6483,0x6400-0x6407,0x6080-0x6083,0x6000-0x601f mem 0xf9dd6000-0xf9dd67ff irq 19 at device 31.2 on pci0 Jan 28 11:19:23 chimney kernel: atapci0: [ITHREAD] Jan 28 11:19:23 chimney kernel: atapci0: AHCI called from vendor specific driver Jan 28 11:19:23 chimney kernel: atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported Jan 28 11:19:23 chimney kernel: ata2: <ATA channel 0> on atapci0 Jan 28 11:19:23 chimney kernel: ata2: [ITHREAD] Jan 28 11:19:23 chimney kernel: ata3: <ATA channel 1> on atapci0 Jan 28 11:19:23 chimney kernel: ata3: [ITHREAD] Jan 28 11:19:23 chimney kernel: ata4: <ATA channel 2> on atapci0 Jan 28 11:19:23 chimney kernel: ata4: [ITHREAD] Jan 28 11:19:23 chimney kernel: ata5: <ATA channel 3> on atapci0 Jan 28 11:19:23 chimney kernel: ata5: [ITHREAD] Jan 28 11:19:23 chimney kernel: ata6: <ATA channel 4> on atapci0 Jan 28 11:19:23 chimney kernel: ata6: [ITHREAD] Jan 28 11:19:23 chimney kernel: ata7: <ATA channel 5> on atapci0 Jan 28 11:19:23 chimney kernel: ata7: [ITHREAD] Jan 28 11:19:23 chimney kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached) Jan 28 11:19:23 chimney kernel: pcib7: <ACPI Host-PCI bridge> on acpi0 Jan 28 11:19:23 chimney kernel: pci128: <ACPI PCI bus> on pcib7 Jan 28 11:19:23 chimney kernel: pcib8: <PCI-PCI bridge> at device 0.0 on pci128 Jan 28 11:19:23 chimney kernel: pci129: <PCI bus> on pcib8 Jan 28 11:19:23 chimney kernel: pcib9: <ACPI PCI-PCI bridge> at device 1.0 on pci128 Jan 28 11:19:23 chimney kernel: pci130: <ACPI PCI bus> on pcib9 Jan 28 11:19:23 chimney kernel: pcib10: <ACPI PCI-PCI bridge> at device 3.0 on pci128 Jan 28 11:19:23 chimney kernel: pci131: <ACPI PCI bus> on pcib10 Jan 28 11:19:23 chimney kernel: siis2: <SiI3132 SATA controller> port 0xbc00-0xbc7f mem 0xf73fe000-0xf73fe07f,0xf73f8000-0xf73fbfff irq 48 at device 0.0 on pci131 Jan 28 11:19:23 chimney kernel: siis2: [ITHREAD] Jan 28 11:19:23 chimney kernel: siisch4: <SIIS channel> at channel 0 on siis2 Jan 28 11:19:23 chimney kernel: siisch4: [ITHREAD] Jan 28 11:19:23 chimney kernel: siisch5: <SIIS channel> at channel 1 on siis2 Jan 28 11:19:23 chimney kernel: siisch5: [ITHREAD] Jan 28 11:19:23 chimney kernel: pcib11: <ACPI PCI-PCI bridge> at device 5.0 on pci128 Jan 28 11:19:23 chimney kernel: pci132: <ACPI PCI bus> on pcib11 Jan 28 11:19:23 chimney kernel: mpt0: <LSILogic SAS/SATA Adapter> port 0xc000-0xc0ff mem 0xf77fc000-0xf77fffff,0xf77e0000-0xf77effff irq 50 at device 0.0 on pci132 Jan 28 11:19:23 chimney kernel: mpt0: [ITHREAD] Jan 28 11:19:23 chimney kernel: mpt0: MPI Version=1.5.14.0 Jan 28 11:19:23 chimney kernel: pcib12: <ACPI PCI-PCI bridge> at device 7.0 on pci128 Jan 28 11:19:23 chimney kernel: pci133: <ACPI PCI bus> on pcib12 Jan 28 11:19:23 chimney kernel: mpt1: <LSILogic SAS/SATA Adapter> port 0xd000-0xd0ff mem 0xf7bfc000-0xf7bfffff,0xf7be0000-0xf7beffff irq 54 at device 0.0 on pci133 Jan 28 11:19:23 chimney kernel: mpt1: [ITHREAD] Jan 28 11:19:23 chimney kernel: mpt1: MPI Version=1.5.19.0 Jan 28 11:19:23 chimney kernel: pcib13: <ACPI PCI-PCI bridge> at device 9.0 on pci128 Jan 28 11:19:23 chimney kernel: pci134: <ACPI PCI bus> on pcib13 Jan 28 11:19:23 chimney kernel: mpt2: <LSILogic SAS/SATA Adapter> port 0xe000-0xe0ff mem 0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 56 at device 0.0 on pci134 Jan 28 11:19:23 chimney kernel: mpt2: [ITHREAD] Jan 28 11:19:23 chimney kernel: mpt2: MPI Version=1.5.19.0 Jan 28 11:19:23 chimney kernel: pci128: <base peripheral, interrupt controller> at device 16.0 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral, interrupt controller> at device 16.1 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral, interrupt controller> at device 17.0 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral, interrupt controller> at device 17.1 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral, interrupt controller> at device 20.0 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral, interrupt controller> at device 20.1 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral, interrupt controller> at device 20.2 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral, interrupt controller> at device 20.3 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral> at device 22.0 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral> at device 22.1 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral> at device 22.2 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral> at device 22.3 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral> at device 22.4 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral> at device 22.5 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral> at device 22.6 (no driver attached) Jan 28 11:19:23 chimney kernel: pci128: <base peripheral> at device 22.7 (no driver attached) Jan 28 11:19:23 chimney kernel: acpi_button0: <Power Button> on acpi0 Jan 28 11:19:23 chimney kernel: atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Jan 28 11:19:23 chimney kernel: uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Jan 28 11:19:23 chimney kernel: uart1: [FILTER] Jan 28 11:19:23 chimney kernel: acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Jan 28 11:19:23 chimney kernel: Timecounter "HPET" frequency 14318180 Hz quality 900 Jan 28 11:19:23 chimney kernel: qpi0: <QPI system bus> on motherboard Jan 28 11:19:23 chimney kernel: pcib14: <QPI Host-PCI bridge> pcibus 255 on qpi0 Jan 28 11:19:23 chimney kernel: pci255: <PCI bus> on pcib14 Jan 28 11:19:23 chimney kernel: pcib15: <QPI Host-PCI bridge> pcibus 254 on qpi0 Jan 28 11:19:23 chimney kernel: pci254: <PCI bus> on pcib15 Jan 28 11:19:23 chimney kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcefff on isa0 Jan 28 11:19:23 chimney kernel: sc0: <System console> at flags 0x100 on isa0 Jan 28 11:19:23 chimney kernel: sc0: VGA <16 virtual consoles, flags=0x300> Jan 28 11:19:23 chimney kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Jan 28 11:19:23 chimney kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jan 28 11:19:23 chimney kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0 Jan 28 11:19:23 chimney kernel: kbd0 at atkbd0 Jan 28 11:19:23 chimney kernel: atkbd0: [GIANT-LOCKED] Jan 28 11:19:23 chimney kernel: atkbd0: [ITHREAD] Jan 28 11:19:23 chimney kernel: ppc0: cannot reserve I/O port range Jan 28 11:19:23 chimney kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0 Jan 28 11:19:23 chimney kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0 Jan 28 11:19:23 chimney kernel: est1: <Enhanced SpeedStep Frequency Control> on cpu1 Jan 28 11:19:23 chimney kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1 Jan 28 11:19:23 chimney kernel: est2: <Enhanced SpeedStep Frequency Control> on cpu2 Jan 28 11:19:23 chimney kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2 Jan 28 11:19:23 chimney kernel: est3: <Enhanced SpeedStep Frequency Control> on cpu3 Jan 28 11:19:23 chimney kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3 Jan 28 11:19:23 chimney kernel: est4: <Enhanced SpeedStep Frequency Control> on cpu4 Jan 28 11:19:23 chimney kernel: p4tcc4: <CPU Frequency Thermal Control> on cpu4 Jan 28 11:19:23 chimney kernel: est5: <Enhanced SpeedStep Frequency Control> on cpu5 Jan 28 11:19:23 chimney kernel: p4tcc5: <CPU Frequency Thermal Control> on cpu5 Jan 28 11:19:23 chimney kernel: est6: <Enhanced SpeedStep Frequency Control> on cpu6 Jan 28 11:19:23 chimney kernel: p4tcc6: <CPU Frequency Thermal Control> on cpu6 Jan 28 11:19:23 chimney kernel: est7: <Enhanced SpeedStep Frequency Control> on cpu7 Jan 28 11:19:23 chimney kernel: p4tcc7: <CPU Frequency Thermal Control> on cpu7 Jan 28 11:19:23 chimney kernel: Timecounters tick every 1.000 msec Jan 28 11:19:23 chimney kernel: (noperiph:siisch4:0:-1:-1): rescan already queued Jan 28 11:19:23 chimney kernel: (noperiph:siisch5:0:-1:-1): rescan already queued Jan 28 11:19:23 chimney kernel: (noperiph:siisch0:0:-1:-1): rescan already queued Jan 28 11:19:23 chimney kernel: (noperiph:siisch1:0:-1:-1): rescan already queued Jan 28 11:19:23 chimney kernel: (noperiph:siisch2:0:-1:-1): rescan already queued Jan 28 11:19:23 chimney kernel: (noperiph:siisch3:0:-1:-1): rescan already queued Jan 28 11:19:23 chimney kernel: usbus0: 12Mbps Full Speed USB v1.0 Jan 28 11:19:23 chimney kernel: usbus1: 12Mbps Full Speed USB v1.0 Jan 28 11:19:23 chimney kernel: usbus2: 480Mbps High Speed USB v2.0 Jan 28 11:19:23 chimney kernel: ad4: 30533MB <OCZ VERTEX 1.6> at ata2-master UDMA100 SATA 3Gb/s Jan 28 11:19:23 chimney kernel: ugen0.1: <Intel> at usbus0 Jan 28 11:19:23 chimney kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 Jan 28 11:19:23 chimney kernel: ugen1.1: <Intel> at usbus1 Jan 28 11:19:23 chimney kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 Jan 28 11:19:23 chimney kernel: ugen2.1: <Intel> at usbus2 Jan 28 11:19:23 chimney kernel: uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 Jan 28 11:19:23 chimney kernel: ad6: 30533MB <OCZ VERTEX 1.6> at ata3-master UDMA100 SATA 3Gb/s Jan 28 11:19:23 chimney kernel: GEOM_MIRROR: Device mirror/gm0 launched (2/2). Jan 28 11:19:23 chimney kernel: GEOM: mirror/gm0s1: geometry does not match label (16h,63s != 255h,63s). Jan 28 11:19:23 chimney kernel: ad8: 1430799MB <Seagate ST31500341AS CC1H> at ata4-master UDMA100 SATA 3Gb/s Jan 28 11:19:23 chimney kernel: GEOM: ad8: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: ad10: 1430799MB <Seagate ST31500341AS CC1H> at ata5-master UDMA100 SATA 3Gb/s Jan 28 11:19:23 chimney kernel: ad12: 1430799MB <Seagate ST31500341AS CC1H> at ata6-master UDMA100 SATA 3Gb/s Jan 28 11:19:23 chimney kernel: GEOM: ad10: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: ad14: 1430799MB <Seagate ST31500341AS CC1H> at ata7-master UDMA100 SATA 3Gb/s Jan 28 11:19:23 chimney kernel: pmp0 at siisch0 bus 0 scbus0 target 15 lun 0 Jan 28 11:19:23 chimney kernel: pmp0: <Port Multiplier 37261095 1706> ATA-0 device Jan 28 11:19:23 chimney kernel: pmp0: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: pmp0: 5 fan-out ports Jan 28 11:19:23 chimney kernel: pmp1 at siisch1 bus 0 scbus1 target 15 lun 0 Jan 28 11:19:23 chimney kernel: pmp1: <Port Multiplier 37261095 1706> ATA-0 device Jan 28 11:19:23 chimney kernel: pmp1: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: pmp1: 5 fan-out ports Jan 28 11:19:23 chimney kernel: pmp2 at siisch2 bus 0 scbus2 target 15 lun 0 Jan 28 11:19:23 chimney kernel: pmp2: <Port Multiplier 37261095 1706> ATA-0 device Jan 28 11:19:23 chimney kernel: pmp2: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: pmp2: 5 fan-out ports Jan 28 11:19:23 chimney kernel: pmp3 at siisch3 bus 0 scbus3 target 15 lun 0 Jan 28 11:19:23 chimney kernel: pmp3: <Port Multiplier 37261095 1706> ATA-0 device Jan 28 11:19:23 chimney kernel: pmp3: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: pmp3: 5 fan-out ports Jan 28 11:19:23 chimney kernel: pmp4 at siisch4 bus 0 scbus4 target 15 lun 0 Jan 28 11:19:23 chimney kernel: pmp4: <Port Multiplier 37261095 1706> ATA-0 device Jan 28 11:19:23 chimney kernel: pmp4: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: pmp4: 5 fan-out ports Jan 28 11:19:23 chimney kernel: pmp5 at siisch5 bus 0 scbus5 target 15 lun 0 Jan 28 11:19:23 chimney kernel: pmp5: <Port Multiplier 37261095 1706> ATA-0 device Jan 28 11:19:23 chimney kernel: pmp5: 300.000MB/s transfers (SATA 2.x, NONE, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: pmp5: 5 fan-out ports Jan 28 11:19:23 chimney kernel: GEOM: ad12: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: uhub0: 2 ports with 2 removable, self powered Jan 28 11:19:23 chimney kernel: uhub1: 2 ports with 2 removable, self powered Jan 28 11:19:23 chimney kernel: GEOM: ad14: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: uhub2: 4 ports with 4 removable, self powered Jan 28 11:19:23 chimney kernel: da0 at mpt0 bus 0 scbus6 target 0 lun 0 Jan 28 11:19:23 chimney kernel: da0: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da0: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da0: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da0: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da1 at mpt0 bus 0 scbus6 target 1 lun 0 Jan 28 11:19:23 chimney kernel: da1: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da1: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da1: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da1: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da2 at mpt0 bus 0 scbus6 target 2 lun 0 Jan 28 11:19:23 chimney kernel: da2: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da2: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da2: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da2: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da3 at mpt0 bus 0 scbus6 target 3 lun 0 Jan 28 11:19:23 chimney kernel: da3: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da3: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da3: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da3: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da4 at mpt0 bus 0 scbus6 target 4 lun 0 Jan 28 11:19:23 chimney kernel: da4: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da4: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da4: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da4: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da8 at mpt1 bus 0 scbus7 target 0 lun 0 Jan 28 11:19:23 chimney kernel: da8: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da8: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da8: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da8: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 28 11:19:23 chimney kernel: da9 at mpt1 bus 0 scbus7 target 1 lun 0 Jan 28 11:19:23 chimney kernel: da9: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da9: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da9: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da9: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 28 11:19:23 chimney kernel: da10 at mpt1 bus 0 scbus7 target 2 lun 0 Jan 28 11:19:23 chimney kernel: da10: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da10: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da10: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da10: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 28 11:19:23 chimney kernel: da5 at mpt0 bus 0 scbus6 target 5 lun 0 Jan 28 11:19:23 chimney kernel: da5: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da5: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da5: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da5: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da6 at mpt0 bus 0 scbus6 target 6 lun 0 Jan 28 11:19:23 chimney kernel: da6: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da6: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da6: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da6: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da7 at mpt0 bus 0 scbus6 target 7 lun 0 Jan 28 11:19:23 chimney kernel: da7: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da7: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da7: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da7: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da11 at mpt1 bus 0 scbus7 target 3 lun 0 Jan 28 11:19:23 chimney kernel: da11: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da11: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da11: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da11: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 28 11:19:23 chimney kernel: da12 at mpt1 bus 0 scbus7 target 4 lun 0 Jan 28 11:19:23 chimney kernel: da12: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da12: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da12: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da12: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 28 11:19:23 chimney kernel: da13 at mpt1 bus 0 scbus7 target 5 lun 0 Jan 28 11:19:23 chimney kernel: da13: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da13: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da13: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da13: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 28 11:19:23 chimney kernel: da14 at mpt1 bus 0 scbus7 target 6 lun 0 Jan 28 11:19:23 chimney kernel: da14: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da14: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da14: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da14: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 28 11:19:23 chimney kernel: da15 at mpt1 bus 0 scbus7 target 7 lun 0 Jan 28 11:19:23 chimney kernel: da15: <ATA SAMSUNG HD753LJ 1109> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da15: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da15: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da15: 715404MB (1465149168 512 byte sectors: 255H 63S/T 91201C) Jan 28 11:19:23 chimney kernel: da16 at mpt2 bus 0 scbus8 target 1 lun 0 Jan 28 11:19:23 chimney kernel: da16: <ATA OCZ-VERTEX 1.7> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da16: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da16: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da16: 30533MB (62533296 512 byte sectors: 255H 63S/T 3892C) Jan 28 11:19:23 chimney kernel: da17 at mpt2 bus 0 scbus8 target 2 lun 0 Jan 28 11:19:23 chimney kernel: da17: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da17: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da17: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da17: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da18 at mpt2 bus 0 scbus8 target 3 lun 0 Jan 28 11:19:23 chimney kernel: da18: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da18: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da18: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da18: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: ada0 at siisch0 bus 0 scbus0 target 0 lun 0da19 at mpt2 bus 0 scbus8 target 5 lun 0 Jan 28 11:19:23 chimney kernel: da19: <ATA OCZ-VERTEX 1.7> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da19: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da19: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da19: 30533MB (62533296 512 byte sectors: 255H 63S/T 3892C) Jan 28 11:19:23 chimney kernel: da20 at mpt2 bus 0 scbus8 target 6 lun 0 Jan 28 11:19:23 chimney kernel: da20: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da20: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da20: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da20: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: da21 at mpt2 bus 0 scbus8 target 7 lun 0 Jan 28 11:19:23 chimney kernel: da21: <ATA ST31500341AS CC1H> Fixed Direct Access SCSI-5 device Jan 28 11:19:23 chimney kernel: da21: 300.000MB/s transfers Jan 28 11:19:23 chimney kernel: da21: Command Queueing enabled Jan 28 11:19:23 chimney kernel: da21: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) Jan 28 11:19:23 chimney kernel: Jan 28 11:19:23 chimney kernel: ada0: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada0: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada1 at siisch0 bus 0 scbus0 target 1 lun 0 Jan 28 11:19:23 chimney kernel: ada1: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada1: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada2 at siisch0 bus 0 scbus0 target 2 lun 0 Jan 28 11:19:23 chimney kernel: ada2: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada2: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada2: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada3 at siisch0 bus 0 scbus0 target 3 lun 0 Jan 28 11:19:23 chimney kernel: ada3: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada3: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada3: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada3: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada4 at siisch1 bus 0 scbus1 target 0 lun 0 Jan 28 11:19:23 chimney kernel: ada4: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada4: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada4: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada4: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada5 at siisch1 bus 0 scbus1 target 1 lun 0 Jan 28 11:19:23 chimney kernel: ada5: <ST3750640AS 3.AAK> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada5: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada5: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada5: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada6 at siisch1 bus 0 scbus1 target 2 lun 0 Jan 28 11:19:23 chimney kernel: ada6: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada6: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada6: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada6: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada7 at siisch1 bus 0 scbus1 target 3 lun 0 Jan 28 11:19:23 chimney kernel: ada7: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada7: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada7: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada7: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada8 at siisch2 bus 0 scbus2 target 0 lun 0 Jan 28 11:19:23 chimney kernel: ada8: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada8: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada8: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada8: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada9 at siisch2 bus 0 scbus2 target 1 lun 0 Jan 28 11:19:23 chimney kernel: ada9: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada9: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada9: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada9: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada10 at siisch2 bus 0 scbus2 target 2 lun 0 Jan 28 11:19:23 chimney kernel: ada10: <ST3750640AS 3.AAK> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada10: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada10: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada10: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada11 at siisch2 bus 0 scbus2 target 3 lun 0 Jan 28 11:19:23 chimney kernel: ada11: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada11: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada11: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada11: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada12 at siisch3 bus 0 scbus3 target 0 lun 0 Jan 28 11:19:23 chimney kernel: ada12: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada12: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada12: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada12: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada13 at siisch3 bus 0 scbus3 target 1 lun 0 Jan 28 11:19:23 chimney kernel: ada13: <ST3750640AS 3.AAK> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada13: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada13: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada13: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada14 at siisch3 bus 0 scbus3 target 2 lun 0 Jan 28 11:19:23 chimney kernel: ada14: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada14: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada14: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada14: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada15 at siisch3 bus 0 scbus3 target 3 lun 0 Jan 28 11:19:23 chimney kernel: ada15: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada15: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada15: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada15: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada16 at siisch4 bus 0 scbus4 target 0 lun 0 Jan 28 11:19:23 chimney kernel: ada16: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada16: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada16: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada16: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada17 at siisch4 bus 0 scbus4 target 1 lun 0 Jan 28 11:19:23 chimney kernel: ada17: <ST3750640AS 3.AAK> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada17: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada17: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada17: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada18 at siisch4 bus 0 scbus4 target 2 lun 0 Jan 28 11:19:23 chimney kernel: ada18: <ST3750640AS 3.AAE> ATA-7 SATA 1.x deviceGEOM: da0: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: Jan 28 11:19:23 chimney kernel: ada18: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada18: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada18: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada19 at siisch4 bus 0 scbus4 target 3 lun 0 Jan 28 11:19:23 chimney kernel: ada19: <ST3750640AS 3.AAK> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada19: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada19: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada19: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada20 at siisch5 bus 0 scbus5 target 0 lun 0 Jan 28 11:19:23 chimney kernel: ada20: <ST3750640AS 3.AAK> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada20: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada20: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada20: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada21 at siisch5 bus 0 scbus5 target 1 lun 0 Jan 28 11:19:23 chimney kernel: ada21: <ST3750640AS 3.AAK> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada21: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada21: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada21: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada22 at siisch5 bus 0 scbus5 target 2 lun 0 Jan 28 11:19:23 chimney kernel: ada22: <ST3750640AS 3.AAK> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada22: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada22: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada22: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ada23 at siisch5 bus 0 scbus5 target 3 lun 0 Jan 28 11:19:23 chimney kernel: ada23: <ST3750640AS 3.AAE> ATA-7 SATA 1.x device Jan 28 11:19:23 chimney kernel: ada23: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) Jan 28 11:19:23 chimney kernel: ada23: Command Queueing enabled Jan 28 11:19:23 chimney kernel: ada23: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) Jan 28 11:19:23 chimney kernel: ar0: writing of DDF metadata is NOT supported yet Jan 28 11:19:23 chimney kernel: ar0: 1429557MB <DDF RAID0 (stripe 64 KB)> status: READY Jan 28 11:19:23 chimney kernel: ar0: disk0 READY using ad8 at ata4-master Jan 28 11:19:23 chimney kernel: ar1: writing of DDF metadata is NOT supported yet Jan 28 11:19:23 chimney kernel: ar1: 1429557MB <DDF RAID0 (stripe 64 KB)> status: READY Jan 28 11:19:23 chimney kernel: ar1: disk0 READY using ad10 at ata5-master Jan 28 11:19:23 chimney kernel: ar2: writing of DDF metadata is NOT supported yet Jan 28 11:19:23 chimney kernel: ar2: 1429557MB <DDF RAID0 (stripe 64 KB)> status: READY Jan 28 11:19:23 chimney kernel: ar2: disk0 READY using ad12 at ata6-master Jan 28 11:19:23 chimney kernel: ar3: writing of DDF metadata is NOT supported yet Jan 28 11:19:23 chimney kernel: ar3: 1429557MB <DDF RAID0 (stripe 64 KB)> status: READY Jan 28 11:19:23 chimney kernel: ar3: disk0 READY using ad14 at ata7-master Jan 28 11:19:23 chimney kernel: SMP: AP CPU #1 Launched! Jan 28 11:19:23 chimney kernel: SMP: AP CPU #4 Launched! Jan 28 11:19:23 chimney kernel: SMP: AP CPU #3 Launched! Jan 28 11:19:23 chimney kernel: SMP: AP CPU #6 Launched! Jan 28 11:19:23 chimney kernel: SMP: AP CPU #2 Launched! Jan 28 11:19:23 chimney kernel: SMP: AP CPU #7 Launched! Jan 28 11:19:23 chimney kernel: SMP: AP CPU #5 Launched! Jan 28 11:19:23 chimney kernel: ugen0.2: <Silitek> at usbus0 Jan 28 11:19:23 chimney kernel: ukbd0: <Silitek IBM USB Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus0 Jan 28 11:19:23 chimney kernel: kbd2 at ukbd0 Jan 28 11:19:23 chimney kernel: GEOM: da1: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da2: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da3: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: uhid0: <Silitek IBM USB Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus0 Jan 28 11:19:23 chimney kernel: GEOM: da4: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da5: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da6: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da7: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da17: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da18: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da20: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: GEOM: da21: the secondary GPT header is not in the last LBA. Jan 28 11:19:23 chimney kernel: Trying to mount root from ufs:/dev/mirror/gm0s1a Jan 28 11:19:23 chimney kernel: ZFS filesystem version 4 Jan 28 11:19:23 chimney kernel: ZFS storage pool version 15 Jan 28 11:19:23 chimney kernel: IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled Jan 28 11:19:23 chimney kernel: cxgbc0: [ITHREAD] Jan 28 11:19:23 chimney last message repeated 8 times --------------050202040600020906070504--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201202012020.q11KKAfn042668>