Date: Sun, 13 Jun 2021 22:02:49 GMT From: Vladimir Kondratyev <wulf@FreeBSD.org> To: src-committers@FreeBSD.org, dev-commits-src-all@FreeBSD.org, dev-commits-src-branches@FreeBSD.org Subject: git: e9dd950507ed - stable/13 - iwmbtfw(8): Improve Intel 7260/7265 adaptors handling Message-ID: <202106132202.15DM2nmR074839@gitrepo.freebsd.org>
next in thread | raw e-mail | index | archive | help
The branch stable/13 has been updated by wulf: URL: https://cgit.FreeBSD.org/src/commit/?id=e9dd950507ed02b7d9ef1f78334246e757b47894 commit e9dd950507ed02b7d9ef1f78334246e757b47894 Author: Vladimir Kondratyev <wulf@FreeBSD.org> AuthorDate: 2021-05-31 19:32:08 +0000 Commit: Vladimir Kondratyev <wulf@FreeBSD.org> CommitDate: 2021-06-13 21:59:38 +0000 iwmbtfw(8): Improve Intel 7260/7265 adaptors handling - Allow firmware downloading for hw_variant #8; - Enter manufacturer mode for setting of event mask; - Handle multi-event response on HCI commands for 7260; This allows to remove kludge with skipping of 0xfc2f opcode. - Disable patch and exit manufacturer mode on downloading failure; - Use default firmware if correct firmware file is not found; Reviewed by: Philippe Michaud-Boudreault <pitwuu_AT_gmail_DOT_com> Tested by: arrowd Differential revision: https://reviews.freebsd.org/D30543 (cherry picked from commit da93a73f834612b659b37b513c8296e1178d249b) --- usr.sbin/bluetooth/iwmbtfw/iwmbt_fw.c | 14 ++++ usr.sbin/bluetooth/iwmbtfw/iwmbt_hw.c | 116 ++++++++++++++++++++-------------- usr.sbin/bluetooth/iwmbtfw/main.c | 9 ++- 3 files changed, 91 insertions(+), 48 deletions(-) diff --git a/usr.sbin/bluetooth/iwmbtfw/iwmbt_fw.c b/usr.sbin/bluetooth/iwmbtfw/iwmbt_fw.c index fc93ce094adc..963d5d5d9008 100644 --- a/usr.sbin/bluetooth/iwmbtfw/iwmbt_fw.c +++ b/usr.sbin/bluetooth/iwmbtfw/iwmbt_fw.c @@ -116,10 +116,12 @@ char * iwmbt_get_fwname(struct iwmbt_version *ver, struct iwmbt_boot_params *params, const char *prefix, const char *suffix) { + struct stat sb; char *fwname; switch (ver->hw_variant) { case 0x07: /* 7260 */ + case 0x08: /* 7265 */ asprintf(&fwname, "%s/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.%s", prefix, le16toh(ver->hw_platform), @@ -131,6 +133,18 @@ iwmbt_get_fwname(struct iwmbt_version *ver, struct iwmbt_boot_params *params, le16toh(ver->fw_build_ww), le16toh(ver->fw_build_yy), suffix); + /* + * Fallback to the default firmware patch if + * the correct firmware patch file is not found. + */ + if (stat(fwname, &sb) != 0 && errno == ENOENT) { + free(fwname); + asprintf(&fwname, "%s/ibt-hw-%x.%x.%s", + prefix, + le16toh(ver->hw_platform), + le16toh(ver->hw_variant), + suffix); + } break; case 0x0b: /* 8260 */ diff --git a/usr.sbin/bluetooth/iwmbtfw/iwmbt_hw.c b/usr.sbin/bluetooth/iwmbtfw/iwmbt_hw.c index f4272548d560..218fd28b74a2 100644 --- a/usr.sbin/bluetooth/iwmbtfw/iwmbt_hw.c +++ b/usr.sbin/bluetooth/iwmbtfw/iwmbt_hw.c @@ -134,17 +134,18 @@ iwmbt_patch_fwfile(struct libusb_device_handle *hdl, struct iwmbt_firmware fw_job = *fw; uint16_t cmd_opcode; uint8_t cmd_length; - uint8_t cmd_buf[IWMBT_HCI_MAX_CMD_SIZE]; + struct iwmbt_hci_cmd *cmd_buf; uint8_t evt_code; uint8_t evt_length; uint8_t evt_buf[IWMBT_HCI_MAX_EVENT_SIZE]; - int skip_patch = 0; + int activate_patch = 0; - for (;;) { - skip_patch = 0; - - if (fw_job.len < 4) - break; + while (fw_job.len > 0) { + if (fw_job.len < 4) { + iwmbt_err("Invalid firmware, unexpected EOF in HCI " + "command header. Remains=%d", fw_job.len); + return (-1); + } if (fw_job.buf[0] != 0x01) { iwmbt_err("Invalid firmware, expected HCI command (%d)", @@ -159,47 +160,61 @@ iwmbt_patch_fwfile(struct libusb_device_handle *hdl, /* Load in the HCI command to perform. */ cmd_opcode = le16dec(fw_job.buf); cmd_length = fw_job.buf[2]; - memcpy(cmd_buf, fw_job.buf, 3); + cmd_buf = (struct iwmbt_hci_cmd *)fw_job.buf; iwmbt_debug("opcode=%04x, len=%02x", cmd_opcode, cmd_length); - /* For some reason the command 0xfc2f hangs up my card. */ - if (cmd_opcode == 0xfc2f) - skip_patch = 1; + /* + * If there is a command that loads a patch in the + * firmware file, then activate the patch upon success, + * otherwise just disable the manufacturer mode. + */ + if (cmd_opcode == 0xfc8e) + activate_patch = 1; /* Advance by three. */ fw_job.buf += 3; fw_job.len -= 3; - if (fw_job.len < cmd_length) - cmd_length = fw_job.len; - - /* Copy data to HCI command buffer. */ - memcpy(cmd_buf + 3, fw_job.buf, - MIN(cmd_length, IWMBT_HCI_MAX_CMD_SIZE - 3)); + if (fw_job.len < cmd_length) { + iwmbt_err("Invalid firmware, unexpected EOF in HCI " + "command data. len=%d, remains=%d", + cmd_length, fw_job.len); + return (-1); + } /* Advance by data length. */ fw_job.buf += cmd_length; fw_job.len -= cmd_length; + ret = libusb_control_transfer(hdl, + LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_DEVICE, + 0, + 0, + 0, + (uint8_t *)cmd_buf, + IWMBT_HCI_CMD_SIZE(cmd_buf), + IWMBT_HCI_CMD_TIMEOUT); + + if (ret < 0) { + iwmbt_err("libusb_control_transfer() failed: err=%s", + libusb_strerror(ret)); + return (-1); + } + /* * Every command has its associated event: data must match * what is recorded in the firmware file. Perform that check * now. - * - * Some commands are mapped to more than one event sequence, - * in that case we can drop the non-patch commands, as we - * probably don't need them for operation of the card. - * */ - for (;;) { + while (fw_job.len > 0 && fw_job.buf[0] == 0x02) { /* Is this the end of the file? */ - if (fw_job.len < 3) - break; - - if (fw_job.buf[0] != 0x02) - break; + if (fw_job.len < 3) { + iwmbt_err("Invalid firmware, unexpected EOF in" + "event header. remains=%d", fw_job.len); + return (-1); + } /* Advance by one. */ fw_job.buf++; @@ -219,30 +234,39 @@ iwmbt_patch_fwfile(struct libusb_device_handle *hdl, iwmbt_debug("event=%04x, len=%02x", evt_code, evt_length); + if (fw_job.len < evt_length) { + iwmbt_err("Invalid firmware, unexpected EOF in" + " event data. len=%d, remains=%d", + evt_length, fw_job.len); + return (-1); + } + + ret = libusb_interrupt_transfer(hdl, + IWMBT_INTERRUPT_ENDPOINT_ADDR, + evt_buf, + IWMBT_HCI_MAX_EVENT_SIZE, + &transferred, + IWMBT_HCI_CMD_TIMEOUT); + + if (ret < 0) { + iwmbt_err("libusb_interrupt_transfer() failed:" + " err=%s", libusb_strerror(ret)); + return (-1); + } + + if ((int)evt_length + 2 != transferred || + memcmp(evt_buf + 2, fw_job.buf, evt_length) != 0) { + iwmbt_err("event does not match firmware"); + return (-1); + } + /* Advance by data length. */ fw_job.buf += evt_length; fw_job.len -= evt_length; - - if (skip_patch == 0) { - ret = iwmbt_hci_command(hdl, - (struct iwmbt_hci_cmd *)cmd_buf, - evt_buf, - IWMBT_HCI_MAX_EVENT_SIZE, - &transferred, - IWMBT_HCI_CMD_TIMEOUT); - - if (ret < 0) { - iwmbt_debug("Can't send patch: " - "code=%d, size=%d", - ret, - transferred); - return (-1); - } - } } } - return (0); + return (activate_patch); } int diff --git a/usr.sbin/bluetooth/iwmbtfw/main.c b/usr.sbin/bluetooth/iwmbtfw/main.c index 3476e3fcd613..202894740805 100644 --- a/usr.sbin/bluetooth/iwmbtfw/main.c +++ b/usr.sbin/bluetooth/iwmbtfw/main.c @@ -441,13 +441,15 @@ main(int argc, char *argv[]) /* Download firmware and parse it for magic Intel Reset parameter */ r = iwmbt_patch_firmware(hdl, firmware_path); free(firmware_path); - if (r < 0) + if (r < 0) { + (void)iwmbt_exit_manufacturer(hdl, 0x01); goto shutdown; + } iwmbt_info("Firmware download complete"); /* Exit manufacturer mode */ - r = iwmbt_exit_manufacturer(hdl, 0x02); + r = iwmbt_exit_manufacturer(hdl, r == 0 ? 0x00 : 0x02); if (r < 0) { iwmbt_debug("iwmbt_exit_manufacturer() failed code %d", r); goto shutdown; @@ -462,9 +464,12 @@ main(int argc, char *argv[]) iwmbt_dump_version(&ver); /* Set Intel Event mask */ + if (iwmbt_enter_manufacturer(hdl) < 0) + goto reset; r = iwmbt_set_event_mask(hdl); if (r == 0) iwmbt_info("Intel Event Mask is set"); + (void)iwmbt_exit_manufacturer(hdl, 0x00); } else {
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?202106132202.15DM2nmR074839>